Short answer: both are discontinued, and they are rated the same for sound quality, though neither ranks well in its class. (#900 and #907 of 909 in-ear headphones). Either one is only an option used, so choose on condition and price. Both are rated below 3.0/5 among the 909 in-ear headphones, and the ThieAudio Monarch MKIII, ranked #1 at $999, is a better place to start if sound quality matters.
What the Westone UM Pro 30 does well: It uses 3 x balanced armature. The tradeoff: Discontinued, so it is mainly found used.
Why pick the Westone UM Pro 50: It uses 5 x balanced armature. The tradeoff: Discontinued, so it is mainly found used.
Buy the Westone UM Pro 30 or the Westone UM Pro 50, whichever you find used in better condition; both are discontinued. For a new speaker, start with the ThieAudio Monarch MKIII instead.
Looking for alternatives? See the complete Headphones rankings.
Specifications Side By Side
| Westone UM Pro 30 | Westone UM Pro 50 | |
|---|---|---|
| Price | Discontinued | Discontinued |
| Ranked | #900 of 909 in In-Ear Headphones | #907 of 909 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Connection | Wired | Wired |
| Driver Type | Balanced armature | Balanced armature |
| Drivers | 3 x balanced armature | 5 x balanced armature |
| Impedance | 56 ohms | 45 ohms |
| Sensitivity | 124 dB/mW | 115 dB/mW |
| Frequency Response | 20Hz - 18kHz | 20Hz - 20kHz |
| Weight | 0 lbs (12.7 g) | 0 lbs (12.7 g) |
| Harman Preference Score | 25 (measured by crinacle, via AutoEQ) | 9 (measured by crinacle, via AutoEQ) |
| Deviation From Target | 5.67 dB standard deviation | 6.52 dB standard deviation |
| Tonal Tilt | -1.48 (negative is warmer, positive brighter) | -2.26 (negative is warmer, positive brighter) |
Related Headphone Comparisons
More top alternatives to Westone UM Pro 30:
- Westone UM Pro 10 vs Westone UM Pro 30
- Westone UM Pro 20 vs Westone UM Pro 30
- Westone UM Pro 10 vs Westone UM Pro 50
- Westone UM Pro 20 vs Westone UM Pro 50
- Campfire Audio Dorado vs Campfire Audio Dorado 2020
Prices on this page were last checked October 13, 2026 at 3:17 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
Westone UM Pro 30 Discontinued eBay
Pros: It uses 3 x balanced armature.
Cons: Discontinued, so it is mainly found used. Its 5.67 dB spread from the target means a noticeably uneven response. A Harman score of 25 places it in the lower part of the in-ear rankings.
Full Westone UM Pro 30 review and specifications →
| Released | 2013 (13 years ago) |
|---|---|
| Connection | Wired |
| Deviation From Target | 5.67 dB standard deviation |
| Driver Type | Balanced armature |
| Drivers | 3 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 18kHz |
| Harman Preference Score | 25 (measured by crinacle, via AutoEQ) |
| Impedance | 56 ohms |
| Sensitivity | 124 dB/mW |
| Tonal Tilt | -1.48 (negative is warmer, positive brighter) |
| Weight | 0 lbs (12.7 g) |
EQ preset to match the Harman target
Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +0.8 dB | 0.70 |
| Peak | 215 Hz | -6.6 dB | 0.52 |
| Peak | 2,663 Hz | +6.4 dB | 0.98 |
| Peak | 1,687 Hz | -5.1 dB | 1.64 |
| Peak | 5,771 Hz | +4.6 dB | 1.01 |
| High shelf | 10,000 Hz | +5.8 dB | 0.70 |
| Peak | 8,498 Hz | -3.1 dB | 4.59 |
| Peak | 858 Hz | +0.7 dB | 2.94 |
| Peak | 482 Hz | -0.3 dB | 1.87 |
| Peak | 2,018 Hz | -0.3 dB | 4.41 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Westone UM Pro 50 Discontinued eBay
Pros: It uses 5 x balanced armature.
Cons: Discontinued, so it is mainly found used. A tonal tilt of -2.26 makes it sound dark, with bass well ahead of the treble. Its 6.52 dB spread from the target means a noticeably uneven response. A Harman score of 9 places it in the lower part of the in-ear rankings.
Full Westone UM Pro 50 review and specifications →
| Released | 2014 (12 years ago) |
|---|---|
| Connection | Wired |
| Deviation From Target | 6.52 dB standard deviation |
| Driver Type | Balanced armature |
| Drivers | 5 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 20kHz |
| Harman Preference Score | 9 (measured by crinacle, via AutoEQ) |
| Impedance | 45 ohms |
| Sensitivity | 115 dB/mW |
| Tonal Tilt | -2.26 (negative is warmer, positive brighter) |
| Weight | 0 lbs (12.7 g) |
EQ preset to match the Harman target
Set a preamp of -6.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -0.6 dB | 0.70 |
| Peak | 211 Hz | -7.9 dB | 0.52 |
| Peak | 4,189 Hz | +6.7 dB | 0.20 |
| Peak | 1,570 Hz | -7.8 dB | 1.84 |
| Peak | 523 Hz | -2.0 dB | 0.92 |
| High shelf | 10,000 Hz | -0.4 dB | 0.70 |
| Peak | 2,457 Hz | +2.0 dB | 5.31 |
| Peak | 1,977 Hz | -1.3 dB | 4.94 |
| Peak | 61 Hz | +0.4 dB | 1.77 |
| Peak | 34 Hz | -0.3 dB | 1.95 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons