Short answer: the MoFi SourcePoint 8 for better sound quality, the Triangle Borea BR03 for the lower price. The MoFi SourcePoint 8 ranks #17 of 130 bookshelf speakers at $2594. The Triangle Borea BR03 ranks #109 at $399, $2195 cheaper.
What the Triangle Borea BR03 offers: Bass output is genuinely decent for the price - measured extension reaches F3 57Hz/F10 42Hz, which the reviewer had no real complaints about. Dual front-firing ports and a well-stuffed, well-braced cabinet. Solid build quality overall. Watch for: A noticeable mid-range suckout, most pronounced in the upper mid-range/lower treble, that the reviewer attributes to cabinet resonances and driver breakup rather than a deliberate voicing choice - it makes vocals and instruments sound recessed and thin rather than warm. Sibilance in the 4-8kHz region shows up on every track the reviewer tried. Measured minimum impedance dips to about 4.2 ohms (with an even lower EPDR), despite the speaker and its own rear panel being labeled 8 ohms - worth knowing if you’re planning to drive these with a receiver/AVR that assumes an 8-ohm nominal load. The reviewer is upfront that this speaker has a devoted following among other reviewers, but says he specifically doesn’t hear what they hear and wants people who own it to trust their own ears rather than assume something’s wrong with their hearing if they don’t love it either.
What the MoFi SourcePoint 8 offers: 8” twin-drive concentric driver paired with a 1.25” soft dome tweeter, in a diffraction-reducing baffle design; rated 47Hz-30kHz. Notably more neutral and true-to-source than its sibling SourcePoint 10, which the reviewer found a bit too bright in the treble by comparison - measured about 4-5dB less high-frequency output. Excellent imaging: passed multiple stereo-panning and depth tests, including smooth continuous left-to-right pans without wobble and correct front-to-back layering of vocals versus percussion. Wide horizontal dispersion of about ±60°, broader than the reviewer expected from a coaxial design, and forgiving enough in placement that about 10° of toe-out variance and moving above or below the tweeter axis both still sound good. Excellent dynamic range and compression linearity - about 26dB of headroom up to 102dB/1m equivalent, with issues only appearing below about 60Hz. 8-ohm nominal impedance made it easy to drive on everything from a budget Denon AVR to a high-end Macintosh amplifier. No significant evidence of woofer-cone modulation distortion affecting the tweeter, even at 96dB/1m. Watch for: Like other coincident designs, produces diffraction dips around 4kHz and 7kHz when pointed directly on-axis; needs about 10-15° of toe-out to smooth those out. The rear-ported cabinet (two ports) means it can’t be placed too close to a wall without the bass becoming overblown - the reviewer settled on about 2 feet of clearance. F3 of 52Hz and F10 of 43Hz mean genuine deep bass tops out in the mid-40s Hz in-room - a subwoofer is still needed for true low-end extension. Harmonic distortion crosses the reviewer’s 3% threshold at 96dB (though it’s second-order and less audibly significant), and multitone distortion becomes noticeably more audible at that same output level. Vertical response doesn’t perfectly mirror horizontal, since the cabinet is a rectangle rather than a perfect square around the driver.
Buy the Triangle Borea BR03 when the price outweighs sound quality for you, and the MoFi SourcePoint 8 when sound quality outweighs the price instead.
The Triangle Borea BR03 is not a sound-quality pick. It sits near the bottom of the 130 bookshelf speakers; there are better options higher up.
Still deciding? The full Passive Home rankings cover every ranked option.
Specifications Side By Side
| Triangle Borea BR03 | MoFi SourcePoint 8 | |
|---|---|---|
| Price | $399.00 per pair | $2594 per pair |
| Ranked | #109 of 130 in Large Size Bookshelf Speakers | #17 of 130 in Large Size Bookshelf Speakers |
| Drivers | 6.5" natural cellulose midwoofer, 1" (25mm) EFS silk dome tweeter | 8" woofer, 1.25-inch soft-dome tweeter |
| Crossover Frequency | 3600Hz | - |
| Dimensions | 14.96"H x 8.11"W x 12.36"D | 18"H x 11.4"W x 13.2"D (457.2 x 289.6 x 335.3 mm) |
| Weight | 13.2 lbs (6 kg) each | 28 lbs (12.7 kg) each |
| Impedance | 8 ohms nominal (manufacturer spec), 4.2 ohms minimum (measured, Erin's Audio Corner) | 8 ohms nominal (8 ohms minimum above 80Hz, measured, Erin's Audio Corner) |
| Sensitivity | 87.5dB (measured at 2.83V/1m, Erin's Audio Corner) | 86.3dB (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 57Hz (measured, Erin's Audio Corner) | 52Hz (measured, Erin's Audio Corner) |
| Bass Extension (-10dB) | 42Hz (measured, Erin's Audio Corner) | 43Hz (measured, Erin's Audio Corner) |
| Recommended Power | 100W | - |
| Woofer Cabinet | ported, dual front ports | ported, rear |
| Spinorama Preference Score | 3.12 | 4.39 |
| Spinorama Preference Score with Perfect Sub | 5.47 | 6.53 |
Related Speaker Comparisons
More worthwhile head-to-heads for MoFi SourcePoint 8:
- MoFi SourcePoint 8 vs Perlisten S4b
- MoFi SourcePoint 8 vs KEF Reference 1 Meta
- MoFi SourcePoint 8 vs GR-Research NX-Studio
- MoFi SourcePoint 8 vs March Audio Sointuva AWG
- MoFi SourcePoint 8 vs AsciLab C6B
Prices on this page were last checked September 16, 2026 at 12:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Triangle Borea BR03: $399.00 per pair Amazon eBay
Pros: Bass output is genuinely decent for the price - measured extension reaches F3 57Hz/F10 42Hz, which the reviewer had no real complaints about. Dual front-firing ports and a well-stuffed, well-braced cabinet. Solid build quality overall. Measured bass extension of 57Hz (-3dB), with a measured sensitivity of 87.5dB.
Cons: A noticeable mid-range suckout, most pronounced in the upper mid-range/lower treble, that the reviewer attributes to cabinet resonances and driver breakup rather than a deliberate voicing choice - it makes vocals and instruments sound recessed and thin rather than warm. Sibilance in the 4-8kHz region shows up on every track the reviewer tried. Measured minimum impedance dips to about 4.2 ohms (with an even lower EPDR), despite the speaker and its own rear panel being labeled 8 ohms - worth knowing if you’re planning to drive these with a receiver/AVR that assumes an 8-ohm nominal load. The reviewer is upfront that this speaker has a devoted following among other reviewers, but says he specifically doesn’t hear what they hear and wants people who own it to trust their own ears rather than assume something’s wrong with their hearing if they don’t love it either.
Full Triangle Borea BR03 review and specifications →
| Bass Extension (-10dB) | 42Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 57Hz (measured, Erin's Audio Corner) |
| Crossover Frequency | 3600Hz |
| Dimensions | 14.96"H x 8.11"W x 12.36"D |
| Drivers | 6.5" natural cellulose midwoofer, 1" (25mm) EFS silk dome tweeter |
| Impedance | 8 ohms nominal (manufacturer spec), 4.2 ohms minimum (measured, Erin's Audio Corner) |
| Recommended Power | 100W |
| Sensitivity | 87.5dB (measured at 2.83V/1m, Erin's Audio Corner) |
| Spinorama Preference Score | 3.12 |
| Spinorama Preference Score with Perfect Sub | 5.47 |
| Weight | 13.2 lbs (6 kg) each |
| Woofer Cabinet | ported, dual front ports |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Triangle Borea BR03 vs B&W 805S
- Triangle Borea BR03 vs Wharfedale Diamond 9.1
- Triangle Borea BR03 vs Klipsch RP-600M
- Triangle Borea BR03 vs Sonus Faber Lumina II Amator
- Triangle Borea BR03 vs Aperion Audio Verus V8B
- Triangle Borea BR03 vs KEF Q350
- Triangle Borea BR03 vs Sonus Faber Sonetto II G2
- Triangle Borea BR03 vs Emotiva Airmotiv B2+
- See all 51 comparisons
MoFi SourcePoint 8: $2594 per pair Crutchfield eBay
Pros: 8” twin-drive concentric driver paired with a 1.25” soft dome tweeter, in a diffraction-reducing baffle design; rated 47Hz-30kHz. Notably more neutral and true-to-source than its sibling SourcePoint 10, which the reviewer found a bit too bright in the treble by comparison - measured about 4-5dB less high-frequency output. Excellent imaging: passed multiple stereo-panning and depth tests, including smooth continuous left-to-right pans without wobble and correct front-to-back layering of vocals versus percussion. Wide horizontal dispersion of about ±60°, broader than the reviewer expected from a coaxial design, and forgiving enough in placement that about 10° of toe-out variance and moving above or below the tweeter axis both still sound good. Excellent dynamic range and compression linearity - about 26dB of headroom up to 102dB/1m equivalent, with issues only appearing below about 60Hz. 8-ohm nominal impedance made it easy to drive on everything from a budget Denon AVR to a high-end Macintosh amplifier. No significant evidence of woofer-cone modulation distortion affecting the tweeter, even at 96dB/1m. Measured bass extension of 52Hz (-3dB), with a measured sensitivity of 86.3dB.
Cons: Like other coincident designs, produces diffraction dips around 4kHz and 7kHz when pointed directly on-axis; needs about 10-15° of toe-out to smooth those out. The rear-ported cabinet (two ports) means it can’t be placed too close to a wall without the bass becoming overblown - the reviewer settled on about 2 feet of clearance. F3 of 52Hz and F10 of 43Hz mean genuine deep bass tops out in the mid-40s Hz in-room - a subwoofer is still needed for true low-end extension. Harmonic distortion crosses the reviewer’s 3% threshold at 96dB (though it’s second-order and less audibly significant), and multitone distortion becomes noticeably more audible at that same output level. Vertical response doesn’t perfectly mirror horizontal, since the cabinet is a rectangle rather than a perfect square around the driver.
Full MoFi SourcePoint 8 review and specifications →
| Bass Extension (-10dB) | 43Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 52Hz (measured, Erin's Audio Corner) |
| Dimensions | 18"H x 11.4"W x 13.2"D (457.2 x 289.6 x 335.3 mm) |
| Drivers | 8" woofer, 1.25-inch soft-dome tweeter |
| Impedance | 8 ohms nominal (8 ohms minimum above 80Hz, measured, Erin's Audio Corner) |
| Sensitivity | 86.3dB (measured, Erin's Audio Corner) |
| Spinorama Preference Score | 4.39 |
| Spinorama Preference Score with Perfect Sub | 6.53 |
| Weight | 28 lbs (12.7 kg) each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Erin’s Audio Corner: Why Do People Love the MoFi SourcePoint 8? More from Erin’s Audio Corner →
- Erin’s Audio Corner Website MoFi SourcePoint 8
- Erin’s Audio Corner: Upgrade Your Sound with These 6 Surprisingly Affordable Speakers!
- Erin’s Audio Corner: My Personal Favorite Speakers Under $2500
- Erin’s Audio Corner: My Top Picks of 2023: Must-Haves Under $3000
- GR-Research: Danny Tackles Andrews Jones: The Source Point 8! Spoiler Alert (It’s Really Good) More from GR-Research →
- Erin’s Audio Corner Measurements (spinorama.org)
- Head-to-Head Comparisons
- MoFi SourcePoint 8 vs Buchardt Audio E50
- MoFi SourcePoint 8 vs KEF R3
- MoFi SourcePoint 8 vs Epos ES14N
- MoFi SourcePoint 8 vs AsciLab F6Bs
- MoFi SourcePoint 8 vs Wharfedale Aura 2
- MoFi SourcePoint 8 vs Arendal 1528 Monitor 8
- MoFi SourcePoint 8 vs KEF Q Concerto Meta
- MoFi SourcePoint 8 vs Ascend Acoustics CMT-340 SE2
- See all 57 comparisons