Tin HiFi T2 Evo vs Tin HiFi T2

Last updated: October 11, 2026

Short answer: the Tin HiFi T2 Evo, though neither ranks well in its class. It ranks #415 of 450 in-ear headphones by sound quality, rated 2.6/5, at $55. The Tin HiFi T2 ranks #426, rated 2.2/5, at $45, $10 cheaper, which does not close the gap in sound quality. Both are rated below 3.0/5 among the 450 in-ear headphones, and the Intuaura Reference 2019, ranked #5 at $34.99, is a better place to start if sound quality matters.

Tin HiFi T2 Evo vs Tin HiFi T2

The Tin HiFi T2 Evo is the better-sounding pick. Listeners who want a neutral or bright presentation are the best match, with presence and treble lifted 2 to 3 dB for clear, crisp detail. The tradeoff: Sub-bass sits about 4 dB below target in hobbyist measurements on squig.link, so kick drums and synth bass lack depth.

The case for the Tin HiFi T2: It costs little and runs easily from a phone at 16 ohms and 102 dB/mW. Watch for: In oratory1990’s measurement sub-bass falls 6 dB below target by 60 Hz and sits 10 dB down at 30 Hz, so kick drums and bass lines sound thin.

Buy the Tin HiFi T2 Evo. It is rated higher for sound quality, and saving $10 with the Tin HiFi T2 does not make up for the sound-quality gap.

Want more options? Browse the full Headphones rankings.

Specifications Side By Side

Tin HiFi T2 Evo Tin HiFi T2
Price$55.00$45.00
Ranked#415 of 450 in In-Ear Headphones#426 of 450 in In-Ear Headphones
Form FactorIn-earIn-ear
BackClosedClosed
Harman Preference Score57 (measured by crinacle, via AutoEQ)52 (measured by oratory1990, via AutoEQ)
Deviation From Target3.20 dB standard deviation3.70 dB standard deviation
Tonal Tilt+1.31 (negative is warmer, positive brighter)+0.58 (negative is warmer, positive brighter)
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-5.1 dB at 30 Hz)Falls 6 dB below target at 60 Hz (-10.0 dB at 30 Hz)
ConnectionWiredWired
Driver TypeDynamicDynamic
Drivers1 x 10mm dynamic1 x 10mm dynamic + 1 x 6mm dynamic
Impedance32 ohms16 ohms
Sensitivity93 dB @ 1kHz (0.126V)102 dB/mW
Frequency Response10Hz - 20kHz (Manufacturer specified)12Hz - 40kHz (Manufacturer specified)

More top alternatives to Tin HiFi T2 Evo:

Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Headphones In Full

Tin HiFi T2 Evo: $55.00 Amazon eBay

Tin HiFi T2 Evo ranking card

Pros: Listeners who want a neutral or bright presentation are the best match, with presence and treble lifted 2 to 3 dB for clear, crisp detail. The largest peak is a moderate 5.3 dB near 8.4 kHz and no deep dips appear between 1.5 and 12 kHz. It is an inexpensive single dynamic driver design.

Cons: Sub-bass sits about 4 dB below target in hobbyist measurements on squig.link, so kick drums and synth bass lack depth. The bright tilt can make harsh recordings fatiguing, and the Final Audio E3000 matches it in rating for less money.

ReleasedSep 2021 (5 years ago)
BackClosed
ConnectionWired
Deviation From Target3.20 dB standard deviation
Driver TypeDynamic
Drivers1 x 10mm dynamic
Form FactorIn-ear
Frequency Response10Hz - 20kHz (Manufacturer specified)
Harman Preference Score57 (measured by crinacle, via AutoEQ)
Impedance32 ohms
Sensitivity93 dB @ 1kHz (0.126V)
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-5.1 dB at 30 Hz)
Tonal Tilt+1.31 (negative is warmer, positive brighter)
EQ preset to match the Harman target

Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.

FilterFrequencyGainQ
Low shelf105 Hz+6.1 dB0.70
Peak5,329 Hz-5.3 dB1.82
Peak766 Hz+3.1 dB1.12
Peak155 Hz-1.4 dB0.80
Peak9,585 Hz+2.1 dB2.63
High shelf10,000 Hz-4.3 dB0.70
Peak2,410 Hz+1.3 dB2.63
Peak1,331 Hz-1.1 dB3.32
Peak3,617 Hz-0.4 dB3.19
Peak978 Hz+0.6 dB4.33

Tin HiFi T2: $45.00 Amazon eBay

Tin HiFi T2 ranking card

Pros: It costs little and runs easily from a phone at 16 ohms and 102 dB/mW. The dual dynamic layout pairs a 10 mm and a 6 mm driver, and its lean bass suits listeners who prefer a neutral low end over boosted bass.

Cons: In oratory1990’s measurement sub-bass falls 6 dB below target by 60 Hz and sits 10 dB down at 30 Hz, so kick drums and bass lines sound thin. A 4.6 dB dip near 2.2 kHz and a presence region about 2.5 dB under target push vocals back, and the SoundMAGIC E11 rates higher for slightly less money.

ReleasedJun 2018 (8 years ago)
BackClosed
ConnectionWired
Deviation From Target3.70 dB standard deviation
Driver TypeDynamic
Drivers1 x 10mm dynamic + 1 x 6mm dynamic
Form FactorIn-ear
Frequency Response12Hz - 40kHz (Manufacturer specified)
Harman Preference Score52 (measured by oratory1990, via AutoEQ)
Impedance16 ohms
Sensitivity102 dB/mW
Sub-bass ExtensionFalls 6 dB below target at 60 Hz (-10.0 dB at 30 Hz)
Tonal Tilt+0.58 (negative is warmer, positive brighter)
EQ preset to match the Harman target

Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.

FilterFrequencyGainQ
Low shelf105 Hz+6.3 dB0.70
Peak218 Hz-3.4 dB0.35
Peak2,000 Hz+4.0 dB0.65
Peak1,237 Hz-1.7 dB1.79
Peak38 Hz+0.5 dB3.51
High shelf10,000 Hz-2.3 dB0.70
Peak6,122 Hz+3.1 dB2.02
Peak5,155 Hz-4.4 dB5.66
Peak2,237 Hz+0.6 dB4.35
Peak2,935 Hz-1.1 dB5.29