Short answer: the Tin HiFi T2 Evo, though neither ranks well in its class. Both are rated 2.6/5 for sound quality (#415 and #412 of 450 in-ear headphones), and the Tin HiFi T2 Evo costs $55 against $69.99 for the 1MORE Triple Driver, and with sound quality even, the cheaper one is the better buy. Both are rated below 3.0/5 among the 450 in-ear headphones; for better sound, the Intuaura Reference 2019 ranks #5 at $34.99.
What the 1MORE Triple Driver does well: A hybrid layout pairs one dynamic driver with two balanced armatures, and the cable carries a built-in microphone for calls. The catch: Treble between 6 and 10 kHz averages 7.7 dB below target, with a dip of about 13 dB near 6.7 kHz, so cymbals, string texture and consonants sound dull and veiled.
The case for the Tin HiFi T2 Evo: Listeners who want a neutral or bright presentation are the best match, with presence and treble lifted 2 to 3 dB for clear, crisp detail. Watch for: Sub-bass sits about 4 dB below target in hobbyist measurements on squig.link, so kick drums and synth bass lack depth.
Buy the Tin HiFi T2 Evo. Both are rated the same for sound quality, and it costs $14.99 less than the 1MORE Triple Driver.
Want more options? Browse the full Headphones rankings.
Specifications Side By Side
| 1MORE Triple Driver | Tin HiFi T2 Evo | |
|---|---|---|
| Price | $69.99 | $55.00 |
| Ranked | #412 of 450 in In-Ear Headphones | #415 of 450 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Harman Preference Score | 57 (measured by crinacle, via AutoEQ) | 57 (measured by crinacle, via AutoEQ) |
| Deviation From Target | 3.28 dB standard deviation | 3.20 dB standard deviation |
| Tonal Tilt | -0.81 (negative is warmer, positive brighter) | +1.31 (negative is warmer, positive brighter) |
| Connection | Wired | Wired |
| Driver Type | Hybrid (1 dynamic + 2 balanced armature) | Dynamic |
| Drivers | 1 x dynamic + 2 x balanced armature | 1 x 10mm dynamic |
| Impedance | 32 ohms | 32 ohms |
| Sensitivity | 99 dB | 93 dB @ 1kHz (0.126V) |
| Frequency Response | 20Hz - 40kHz (Manufacturer specified) | 10Hz - 20kHz (Manufacturer specified) |
| Built-in Microphone | Yes | - |
| Back | Closed | Closed |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+0.2 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (-5.1 dB at 30 Hz) |
Related Headphone Comparisons
More worthwhile head-to-heads for 1MORE Triple Driver:
- KZ AS10 vs 1MORE Triple Driver
- Sennheiser CX 3.00 vs 1MORE Triple Driver
- 1MORE Triple Driver vs Final Audio E3000
- 1MORE Triple Driver vs Questyle NHB12
- 1MORE Triple Driver vs iBasso IT01
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
1MORE Triple Driver: $69.99 Amazon eBay
Pros: A hybrid layout pairs one dynamic driver with two balanced armatures, and the cable carries a built-in microphone for calls. Across several hobbyist measurements on squig.link the bass sits about 5.8 dB above target and sub-bass about 2.3 dB above, which suits listeners who want a warm, bass-forward tilt. At 32 ohms it plugs straight into a phone without any extra amplification.
Cons: Treble between 6 and 10 kHz averages 7.7 dB below target, with a dip of about 13 dB near 6.7 kHz, so cymbals, string texture and consonants sound dull and veiled. The bass bump also spills into the low mids, adding about 2.9 dB of thickness that muddies vocals. Its preference score of 57 from crinacle’s measurement is well short of the Harman target.
Full 1MORE Triple Driver review and specifications →
| Released | Mar 2017 (9 years ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | Yes |
| Connection | Wired |
| Deviation From Target | 3.28 dB standard deviation |
| Driver Type | Hybrid (1 dynamic + 2 balanced armature) |
| Drivers | 1 x dynamic + 2 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 57 (measured by crinacle, via AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 99 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+0.2 dB at 30 Hz) |
| Tonal Tilt | -0.81 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -5.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +8.5 dB | 0.70 |
| Peak | 57 Hz | -8.9 dB | 0.25 |
| Peak | 9,119 Hz | +6.0 dB | 0.81 |
| Peak | 830 Hz | +3.7 dB | 1.07 |
| Peak | 4,495 Hz | -5.7 dB | 5.76 |
| High shelf | 10,000 Hz | -5.3 dB | 0.70 |
| Peak | 5,986 Hz | +3.0 dB | 5.26 |
| Peak | 2,527 Hz | -1.3 dB | 3.64 |
| Peak | 6,792 Hz | -1.1 dB | 6.00 |
| Peak | 440 Hz | +0.2 dB | 2.11 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Tin HiFi T2 Evo: $55.00 Amazon eBay
Pros: Listeners who want a neutral or bright presentation are the best match, with presence and treble lifted 2 to 3 dB for clear, crisp detail. The largest peak is a moderate 5.3 dB near 8.4 kHz and no deep dips appear between 1.5 and 12 kHz. It is an inexpensive single dynamic driver design.
Cons: Sub-bass sits about 4 dB below target in hobbyist measurements on squig.link, so kick drums and synth bass lack depth. The bright tilt can make harsh recordings fatiguing, and the Final Audio E3000 matches it in rating for less money.
Full Tin HiFi T2 Evo review and specifications →
| Released | Sep 2021 (5 years ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 3.20 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 10Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 57 (measured by crinacle, via AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 93 dB @ 1kHz (0.126V) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-5.1 dB at 30 Hz) |
| Tonal Tilt | +1.31 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +6.1 dB | 0.70 |
| Peak | 5,329 Hz | -5.3 dB | 1.82 |
| Peak | 766 Hz | +3.1 dB | 1.12 |
| Peak | 155 Hz | -1.4 dB | 0.80 |
| Peak | 9,585 Hz | +2.1 dB | 2.63 |
| High shelf | 10,000 Hz | -4.3 dB | 0.70 |
| Peak | 2,410 Hz | +1.3 dB | 2.63 |
| Peak | 1,331 Hz | -1.1 dB | 3.32 |
| Peak | 3,617 Hz | -0.4 dB | 3.19 |
| Peak | 978 Hz | +0.6 dB | 4.33 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons