Short answer: the KZ AS10, though neither ranks well in its class. It ranks #398 of 450 in-ear headphones by sound quality, rated 2.9/5, at $59.99; the 1MORE Triple Driver ranks #412, rated 2.6/5, and costs $69.99, which makes this an easy call rather than a real tradeoff. Both are rated below 3.0/5 among the 450 in-ear headphones; for better sound, the Intuaura Reference 2019 ranks #5 at $34.99.
The case for the KZ AS10: Five balanced armature drivers per side is an unusual layout at a modest price, and the bass sits about 6 dB above target between 60 and 200 Hz for listeners who want a thick, warm low end. The catch: That bass boost spills into the low mids, 3.3 dB over target, which muddies voices and guitars, and a 6.4 dB peak near 11.9 kHz adds glare up top in hobbyist measurements on squig.link.
What the 1MORE Triple Driver does well: A hybrid layout pairs one dynamic driver with two balanced armatures, and the cable carries a built-in microphone for calls. Watch for: Treble between 6 and 10 kHz averages 7.7 dB below target, with a dip of about 13 dB near 6.7 kHz, so cymbals, string texture and consonants sound dull and veiled.
Buy the KZ AS10. It is rated higher for sound quality than the 1MORE Triple Driver and costs less, which makes it the one to get unless you need something the other one does better.
Want more options? Browse the full Headphones rankings.
Specifications Side By Side
| KZ AS10 | 1MORE Triple Driver | |
|---|---|---|
| Price | $59.99 | $69.99 |
| Ranked | #398 of 450 in In-Ear Headphones | #412 of 450 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Harman Preference Score | 60 (measured by crinacle, via AutoEQ) | 57 (measured by crinacle, via AutoEQ) |
| Deviation From Target | 2.91 dB standard deviation | 3.28 dB standard deviation |
| Tonal Tilt | -0.89 (negative is warmer, positive brighter) | -0.81 (negative is warmer, positive brighter) |
| Connection | Wired | Wired |
| Driver Type | Balanced armature | Hybrid (1 dynamic + 2 balanced armature) |
| Drivers | 5 x balanced armature | 1 x dynamic + 2 x balanced armature |
| Impedance | 14 ohms | 32 ohms |
| Sensitivity | 105 dB/mW | 99 dB |
| Frequency Response | 20Hz - 40kHz (Manufacturer specified) | 20Hz - 40kHz (Manufacturer specified) |
| Back | Closed | Closed |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+0.2 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (+0.2 dB at 30 Hz) |
| Built-in Microphone | - | Yes |
Related Headphone Comparisons
How KZ AS10 compares with other leading options:
- KZ AS10 vs Sennheiser CX 3.00
- KZ AS10 vs Final Audio E3000
- KZ AS10 vs Tin HiFi T2 Evo
- 1MORE Triple Driver vs Tin HiFi T2 Evo
- 1MORE Triple Driver vs iBasso IT01
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
KZ AS10: $59.99 Amazon eBay
Pros: Five balanced armature drivers per side is an unusual layout at a modest price, and the bass sits about 6 dB above target between 60 and 200 Hz for listeners who want a thick, warm low end. It is rated above the Sennheiser CX 3.00, 1MORE Triple Driver and Questyle NHB12. At 14 ohms and 105 dB/mW it runs easily from a phone.
Cons: That bass boost spills into the low mids, 3.3 dB over target, which muddies voices and guitars, and a 6.4 dB peak near 11.9 kHz adds glare up top in hobbyist measurements on squig.link. Crinacle’s preference score of 60 shows how far the overall tuning is from what most listeners prefer, and there is no microphone.
Full KZ AS10 review and specifications →
| Released | 2019 (7 years ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 2.91 dB standard deviation |
| Driver Type | Balanced armature |
| Drivers | 5 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 60 (measured by crinacle, via AutoEQ) |
| Impedance | 14 ohms |
| Sensitivity | 105 dB/mW |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+0.2 dB at 30 Hz) |
| Tonal Tilt | -0.89 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -5.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -1.0 dB | 0.70 |
| Peak | 157 Hz | -4.3 dB | 0.67 |
| Peak | 1,285 Hz | +4.5 dB | 0.47 |
| Peak | 3,019 Hz | -6.4 dB | 2.71 |
| Peak | 298 Hz | -1.2 dB | 1.07 |
| High shelf | 10,000 Hz | +5.0 dB | 0.70 |
| Peak | 5,029 Hz | -5.0 dB | 5.86 |
| Peak | 6,215 Hz | +2.7 dB | 5.38 |
| Peak | 2,075 Hz | +1.1 dB | 3.28 |
| Peak | 1,354 Hz | -0.8 dB | 3.11 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
1MORE Triple Driver: $69.99 Amazon eBay
Pros: A hybrid layout pairs one dynamic driver with two balanced armatures, and the cable carries a built-in microphone for calls. Across several hobbyist measurements on squig.link the bass sits about 5.8 dB above target and sub-bass about 2.3 dB above, which suits listeners who want a warm, bass-forward tilt. At 32 ohms it plugs straight into a phone without any extra amplification.
Cons: Treble between 6 and 10 kHz averages 7.7 dB below target, with a dip of about 13 dB near 6.7 kHz, so cymbals, string texture and consonants sound dull and veiled. The bass bump also spills into the low mids, adding about 2.9 dB of thickness that muddies vocals. Its preference score of 57 from crinacle’s measurement is well short of the Harman target.
Full 1MORE Triple Driver review and specifications →
| Released | Mar 2017 (9 years ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | Yes |
| Connection | Wired |
| Deviation From Target | 3.28 dB standard deviation |
| Driver Type | Hybrid (1 dynamic + 2 balanced armature) |
| Drivers | 1 x dynamic + 2 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 57 (measured by crinacle, via AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 99 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+0.2 dB at 30 Hz) |
| Tonal Tilt | -0.81 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -5.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +8.5 dB | 0.70 |
| Peak | 57 Hz | -8.9 dB | 0.25 |
| Peak | 9,119 Hz | +6.0 dB | 0.81 |
| Peak | 830 Hz | +3.7 dB | 1.07 |
| Peak | 4,495 Hz | -5.7 dB | 5.76 |
| High shelf | 10,000 Hz | -5.3 dB | 0.70 |
| Peak | 5,986 Hz | +3.0 dB | 5.26 |
| Peak | 2,527 Hz | -1.3 dB | 3.64 |
| Peak | 6,792 Hz | -1.1 dB | 6.00 |
| Peak | 440 Hz | +0.2 dB | 2.11 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons