Short answer: the 1MORE Triple Driver, though neither ranks well in its class. Both are rated 2.6/5 for sound quality (#412 and #414 of 450 in-ear headphones), and the 1MORE Triple Driver costs $69.99 against $89 for the Questyle NHB12, and with sound quality even, the cheaper one is the better buy. Both are rated below 3.0/5 among the 450 in-ear headphones, so if sound quality matters, consider the Intuaura Reference 2019 instead, ranked #5 at $34.99.
What the 1MORE Triple Driver does well: A hybrid layout pairs one dynamic driver with two balanced armatures, and the cable carries a built-in microphone for calls. The catch: Treble between 6 and 10 kHz averages 7.7 dB below target, with a dip of about 13 dB near 6.7 kHz, so cymbals, string texture and consonants sound dull and veiled.
What the Questyle NHB12 does well: For bass lovers it delivers about 5 dB extra sub-bass and 6.4 dB extra bass over target, with 3.9 dB more than target at 30 Hz, so low notes have weight and rumble. The tradeoff: A 7.5 dB peak near 11.8 kHz on top of the heavy bass gives a V-shaped sound that HypetheSonics’ measurement scores at only 57 on preference.
Buy the 1MORE Triple Driver. Both are rated the same for sound quality, and it costs $19.01 less than the Questyle NHB12.
Looking for alternatives? See the complete Headphones rankings.
Specifications Side By Side
| 1MORE Triple Driver | Questyle NHB12 | |
|---|---|---|
| Price | $69.99 | $89.00 |
| Ranked | #412 of 450 in In-Ear Headphones | #414 of 450 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Harman Preference Score | 57 (measured by crinacle, via AutoEQ) | 57 (measured by HypetheSonics, via AutoEQ) |
| Deviation From Target | 3.28 dB standard deviation | 2.98 dB standard deviation |
| Tonal Tilt | -0.81 (negative is warmer, positive brighter) | -1.21 (negative is warmer, positive brighter) |
| Connection | Wired | Wired |
| Driver Type | Hybrid (1 dynamic + 2 balanced armature) | Dynamic |
| Drivers | 1 x dynamic + 2 x balanced armature | 1 x dynamic |
| Impedance | 32 ohms | 38 ohms |
| Sensitivity | 99 dB | - |
| Frequency Response | 20Hz - 40kHz (Manufacturer specified) | 20Hz - 20kHz (Manufacturer specified) |
| Built-in Microphone | Yes | - |
| Back | Closed | Closed |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+0.2 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (+3.9 dB at 30 Hz) |
| Weight | - | 0 lbs (13 g) per earpiece |
Related Headphone Comparisons
More top alternatives to 1MORE Triple Driver:
- KZ AS10 vs 1MORE Triple Driver
- Sennheiser CX 3.00 vs 1MORE Triple Driver
- 1MORE Triple Driver vs Final Audio E3000
- 1MORE Triple Driver vs Tin HiFi T2 Evo
- 1MORE Triple Driver vs iBasso IT01
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
1MORE Triple Driver: $69.99 Amazon eBay
Pros: A hybrid layout pairs one dynamic driver with two balanced armatures, and the cable carries a built-in microphone for calls. Across several hobbyist measurements on squig.link the bass sits about 5.8 dB above target and sub-bass about 2.3 dB above, which suits listeners who want a warm, bass-forward tilt. At 32 ohms it plugs straight into a phone without any extra amplification.
Cons: Treble between 6 and 10 kHz averages 7.7 dB below target, with a dip of about 13 dB near 6.7 kHz, so cymbals, string texture and consonants sound dull and veiled. The bass bump also spills into the low mids, adding about 2.9 dB of thickness that muddies vocals. Its preference score of 57 from crinacle’s measurement is well short of the Harman target.
Full 1MORE Triple Driver review and specifications →
| Released | Mar 2017 (9 years ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | Yes |
| Connection | Wired |
| Deviation From Target | 3.28 dB standard deviation |
| Driver Type | Hybrid (1 dynamic + 2 balanced armature) |
| Drivers | 1 x dynamic + 2 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 57 (measured by crinacle, via AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 99 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+0.2 dB at 30 Hz) |
| Tonal Tilt | -0.81 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -5.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +8.5 dB | 0.70 |
| Peak | 57 Hz | -8.9 dB | 0.25 |
| Peak | 9,119 Hz | +6.0 dB | 0.81 |
| Peak | 830 Hz | +3.7 dB | 1.07 |
| Peak | 4,495 Hz | -5.7 dB | 5.76 |
| High shelf | 10,000 Hz | -5.3 dB | 0.70 |
| Peak | 5,986 Hz | +3.0 dB | 5.26 |
| Peak | 2,527 Hz | -1.3 dB | 3.64 |
| Peak | 6,792 Hz | -1.1 dB | 6.00 |
| Peak | 440 Hz | +0.2 dB | 2.11 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Questyle NHB12: $89.00 Amazon eBay
Pros: For bass lovers it delivers about 5 dB extra sub-bass and 6.4 dB extra bass over target, with 3.9 dB more than target at 30 Hz, so low notes have weight and rumble. The midrange stays close to target from 1 to 6 kHz, keeping vocals present despite the boosted lows. Its 38 ohm single dynamic driver weighs 13 g per earpiece.
Cons: A 7.5 dB peak near 11.8 kHz on top of the heavy bass gives a V-shaped sound that HypetheSonics’ measurement scores at only 57 on preference. The Tin HiFi T2 Evo and 1MORE Triple Driver share its rating at lower prices, and the Sennheiser CX 3.00 is rated higher for less.
Full Questyle NHB12 review and specifications →
| Released | 2023 (3 years ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 2.98 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x dynamic |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 57 (measured by HypetheSonics, via AutoEQ) |
| Impedance | 38 ohms |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+3.9 dB at 30 Hz) |
| Tonal Tilt | -1.21 (negative is warmer, positive brighter) |
| Weight | 0 lbs (13 g) per earpiece |
EQ preset to match the Harman target
Set a preamp of -3.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -3.9 dB | 0.70 |
| Peak | 171 Hz | -4.5 dB | 0.69 |
| Peak | 791 Hz | +3.5 dB | 0.80 |
| Peak | 3,278 Hz | +3.6 dB | 2.66 |
| Peak | 65 Hz | +1.2 dB | 1.29 |
| High shelf | 10,000 Hz | +0.3 dB | 0.70 |
| Peak | 8,076 Hz | -1.7 dB | 2.57 |
| Peak | 5,123 Hz | -2.6 dB | 5.79 |
| Peak | 6,409 Hz | +2.3 dB | 5.97 |
| Peak | 3,999 Hz | +1.0 dB | 5.06 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons