Short answer: the Tin HiFi T2 Evo, though neither ranks well in its class. It ranks #415 of 450 in-ear headphones by sound quality, rated 2.6/5, at $55; the iBasso IT01 ranks #417, rated 2.5/5, and costs $69, so there is not much of a tradeoff to weigh. Both are rated below 3.0/5 among the 450 in-ear headphones; for better sound, the Intuaura Reference 2019 ranks #5 at $34.99.
The case for the Tin HiFi T2 Evo: Listeners who want a neutral or bright presentation are the best match, with presence and treble lifted 2 to 3 dB for clear, crisp detail. The catch: Sub-bass sits about 4 dB below target in hobbyist measurements on squig.link, so kick drums and synth bass lack depth.
What the iBasso IT01 does well: A single 10mm dynamic driver with 16 ohm impedance and 108 dB sensitivity runs easily from a phone or dongle. The catch: Its preference score of 55 from crinacle’s measurement is far from the Harman target, with a noticeably warm tilt.
Buy the Tin HiFi T2 Evo. It is rated higher for sound quality than the iBasso IT01 and costs less, so it is the default pick unless a specific strength of the other one matters more to you.
Still deciding? The full Headphones rankings cover every ranked option.
Specifications Side By Side
| Tin HiFi T2 Evo | iBasso IT01 | |
|---|---|---|
| Price | $55.00 | $69.00 |
| Ranked | #415 of 450 in In-Ear Headphones | #417 of 450 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Back | Closed | Closed |
| Harman Preference Score | 57 (measured by crinacle, via AutoEQ) | 55 (measured by crinacle, via AutoEQ) |
| Deviation From Target | 3.20 dB standard deviation | 3.12 dB standard deviation |
| Tonal Tilt | +1.31 (negative is warmer, positive brighter) | -1.19 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-5.1 dB at 30 Hz) | - |
| Connection | Wired | Wired |
| Driver Type | Dynamic | Dynamic |
| Drivers | 1 x 10mm dynamic | 1 x 10mm dynamic |
| Impedance | 32 ohms | 16 ohms |
| Sensitivity | 93 dB @ 1kHz (0.126V) | 108 dB |
| Frequency Response | 10Hz - 20kHz (Manufacturer specified) | 10Hz - 42kHz (Manufacturer specified) |
Related Headphone Comparisons
More top alternatives to Tin HiFi T2 Evo:
- KZ AS10 vs Tin HiFi T2 Evo
- 1MORE Triple Driver vs Tin HiFi T2 Evo
- Final Audio E3000 vs Tin HiFi T2 Evo
- Tin HiFi T2 Evo vs SoundMAGIC E11
- Tin HiFi T2 Evo vs Tin HiFi T2
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
Tin HiFi T2 Evo: $55.00 Amazon eBay
Pros: Listeners who want a neutral or bright presentation are the best match, with presence and treble lifted 2 to 3 dB for clear, crisp detail. The largest peak is a moderate 5.3 dB near 8.4 kHz and no deep dips appear between 1.5 and 12 kHz. It is an inexpensive single dynamic driver design.
Cons: Sub-bass sits about 4 dB below target in hobbyist measurements on squig.link, so kick drums and synth bass lack depth. The bright tilt can make harsh recordings fatiguing, and the Final Audio E3000 matches it in rating for less money.
Full Tin HiFi T2 Evo review and specifications →
| Released | Sep 2021 (5 years ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 3.20 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 10Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 57 (measured by crinacle, via AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 93 dB @ 1kHz (0.126V) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-5.1 dB at 30 Hz) |
| Tonal Tilt | +1.31 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +6.1 dB | 0.70 |
| Peak | 5,329 Hz | -5.3 dB | 1.82 |
| Peak | 766 Hz | +3.1 dB | 1.12 |
| Peak | 155 Hz | -1.4 dB | 0.80 |
| Peak | 9,585 Hz | +2.1 dB | 2.63 |
| High shelf | 10,000 Hz | -4.3 dB | 0.70 |
| Peak | 2,410 Hz | +1.3 dB | 2.63 |
| Peak | 1,331 Hz | -1.1 dB | 3.32 |
| Peak | 3,617 Hz | -0.4 dB | 3.19 |
| Peak | 978 Hz | +0.6 dB | 4.33 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
iBasso IT01: $69.00 Amazon eBay
Pros: A single 10mm dynamic driver with 16 ohm impedance and 108 dB sensitivity runs easily from a phone or dongle. It costs about the same as the 1MORE Triple Driver and suits buyers wanting a simple single driver in-ear.
Cons: Its preference score of 55 from crinacle’s measurement is far from the Harman target, with a noticeably warm tilt. The SoundMAGIC E11 earns the same rating for less money, and the 1MORE Triple Driver rates higher at a similar price.
Full iBasso IT01 review and specifications →
| Released | 2018 (8 years ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 3.12 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 10Hz - 42kHz (Manufacturer specified) |
| Harman Preference Score | 55 (measured by crinacle, via AutoEQ) |
| Impedance | 16 ohms |
| Sensitivity | 108 dB |
| Tonal Tilt | -1.19 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -4.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -1.9 dB | 0.70 |
| Peak | 233 Hz | -4.6 dB | 0.65 |
| Peak | 2,618 Hz | +3.3 dB | 0.29 |
| Peak | 5,109 Hz | -4.3 dB | 4.82 |
| Peak | 9,736 Hz | +2.1 dB | 2.75 |
| High shelf | 10,000 Hz | +0.2 dB | 0.70 |
| Peak | 66 Hz | +0.9 dB | 3.73 |
| Peak | 1,257 Hz | -1.1 dB | 1.20 |
| Peak | 985 Hz | +1.9 dB | 3.03 |
| Peak | 3,511 Hz | +1.3 dB | 4.26 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons


