Short answer: the Symphonium Audio Triton. It ranks #352 of 450 in-ear headphones by sound quality, rated 3.5/5, at $899; the SeeAudio Neo ranks #365, rated 3.4/5, and costs $1,099, which makes this an easy call rather than a real tradeoff.
What the Symphonium Audio Triton does well: The hybrid of one dynamic driver and two balanced armatures keeps the bass and midrange close to target, with the bass band within 0.5 dB and the upper mids within 0.9 dB in squig.link measurements. The catch: Across hobbyist measurements the presence band sits 5.1 dB low with a 6.6 dB dip near 6.3 kHz, which dulls vocal edge, cymbals and fine detail.
Why pick the SeeAudio Neo: Bass and sub-bass sit within a decibel of target down to 20 Hz, giving a clean, controlled low end without boom. The tradeoff: Squig.link measurements show the 3 to 6 kHz presence band about 5.4 dB below target with a 9.2 dB dip near 5.5 kHz, so vocals lose clarity and instruments sound recessed.
Buy the Symphonium Audio Triton. It is rated higher for sound quality than the SeeAudio Neo and costs less, so only choose the other one for a particular feature it does better.
Looking for alternatives? See the complete Headphones rankings.
Specifications Side By Side
| Symphonium Audio Triton | SeeAudio Neo | |
|---|---|---|
| Price | $899.00 | $1,099.00 |
| Ranked | #352 of 450 in In-Ear Headphones | #365 of 450 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Back | Closed | Closed |
| Harman Preference Score | 68 (measured by crinacle, via AutoEQ) | 66 (measured by crinacle, via AutoEQ) |
| Deviation From Target | 2.43 dB standard deviation | 2.51 dB standard deviation |
| Tonal Tilt | -0.55 (negative is warmer, positive brighter) | -0.80 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-2.3 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (+0.6 dB at 30 Hz) |
| Connection | Wired | Wired |
| Driver Type | Hybrid (1 dynamic + 2 balanced armature) | Balanced armature |
| Drivers | 1 x dynamic + 2 x balanced armature | 10 x balanced armature |
| Impedance | 8.3 ohms | 28 ohms |
| Sensitivity | 107 dB SPL/V | 116 dB/mW |
| Frequency Response | 11Hz - 21kHz (Manufacturer specified) | 20Hz - 20kHz (Manufacturer specified) |
| Built-in Microphone | No | No |
Related Headphone Comparisons
More worthwhile head-to-heads for Symphonium Audio Triton:
- SoftEars Twilight vs Symphonium Audio Triton
- HIFIMAN RE2000 vs Symphonium Audio Triton
- Sennheiser IE 600 vs Symphonium Audio Triton
- Symphonium Audio Triton vs JVC HA-FW1500
- Symphonium Audio Triton vs DUNU Zen Pro
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
Symphonium Audio Triton: $899.00 Headphones.com eBay
Pros: The hybrid of one dynamic driver and two balanced armatures keeps the bass and midrange close to target, with the bass band within 0.5 dB and the upper mids within 0.9 dB in squig.link measurements. Sub-bass still reaches 20 Hz within 6 dB of target, sitting 2.3 dB low at 30 Hz. At 107 dB/V and 8.3 ohms it plays loud from a phone.
Cons: Across hobbyist measurements the presence band sits 5.1 dB low with a 6.6 dB dip near 6.3 kHz, which dulls vocal edge, cymbals and fine detail. Crinacle’s preference score of 68 is middling, and the SoftEars Twilight rates higher at a similar price.
Full Symphonium Audio Triton review and specifications →
| Back | Closed |
|---|---|
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 2.43 dB standard deviation |
| Driver Type | Hybrid (1 dynamic + 2 balanced armature) |
| Drivers | 1 x dynamic + 2 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 11Hz - 21kHz (Manufacturer specified) |
| Harman Preference Score | 68 (measured by crinacle, via AutoEQ) |
| Impedance | 8.3 ohms |
| Sensitivity | 107 dB SPL/V |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-2.3 dB at 30 Hz) |
| Tonal Tilt | -0.55 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -4.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -1.5 dB | 0.70 |
| Peak | 206 Hz | -2.9 dB | 0.48 |
| Peak | 3,027 Hz | +5.8 dB | 0.38 |
| Peak | 1,713 Hz | -6.4 dB | 0.95 |
| Peak | 70 Hz | +3.1 dB | 0.69 |
| High shelf | 10,000 Hz | -3.9 dB | 0.70 |
| Peak | 3,424 Hz | +1.1 dB | 3.91 |
| Peak | 5,290 Hz | -1.6 dB | 5.99 |
| Peak | 6,437 Hz | +1.9 dB | 6.00 |
| Peak | 2,469 Hz | -0.7 dB | 4.04 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
SeeAudio Neo: $1,099.00 Linsoul eBay
Pros: Bass and sub-bass sit within a decibel of target down to 20 Hz, giving a clean, controlled low end without boom. Ten balanced armatures add about 3.8 dB of air above 10 kHz for some sparkle. At 116 dB/mW it gets loud from any phone or dongle. It rates higher than the qdc Anole V6 while costing less.
Cons: Squig.link measurements show the 3 to 6 kHz presence band about 5.4 dB below target with a 9.2 dB dip near 5.5 kHz, so vocals lose clarity and instruments sound recessed. Such high sensitivity can reveal background hiss from noisy sources. The DUNU Zen Pro and JVC HA-FW1500 earn the same rating for less money.
Full SeeAudio Neo review and specifications →
| Released | Jan 2021 (5 years ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 2.51 dB standard deviation |
| Driver Type | Balanced armature |
| Drivers | 10 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 66 (measured by crinacle, via AutoEQ) |
| Impedance | 28 ohms |
| Sensitivity | 116 dB/mW |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+0.6 dB at 30 Hz) |
| Tonal Tilt | -0.80 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -5.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -1.5 dB | 0.70 |
| Peak | 5,931 Hz | +3.8 dB | 0.43 |
| Peak | 164 Hz | -2.6 dB | 1.07 |
| Peak | 1,573 Hz | -5.0 dB | 1.52 |
| Peak | 675 Hz | +1.6 dB | 1.31 |
| High shelf | 10,000 Hz | -5.1 dB | 0.70 |
| Peak | 3,085 Hz | +1.2 dB | 2.87 |
| Peak | 4,400 Hz | -3.5 dB | 5.82 |
| Peak | 5,545 Hz | +2.3 dB | 6.00 |
| Peak | 8,098 Hz | +1.7 dB | 2.84 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons