Short answer: the Shuoer Galileo. It ranks #33 of 450 in-ear headphones by sound quality, rated 4.7/5, at $69.99; the Tin HiFi T4 Plus ranks #70, rated 4.5/5, at $69. Close enough in price that the sound-quality gap is the deciding factor.
The case for the Shuoer Galileo: The median of 12 hobbyist measurements on squig.link gives the Galileo a preference score of 82 with a smooth 1.21 dB deviation. The catch: The presence region from 3 to 6 kHz sits about 4.1 dB low, which pushes vocals and guitar attack back behind the bass.
Why pick the Tin HiFi T4 Plus: Across ten squig.link measurements it scores 80.0 for preference, with sub-bass sitting right on target down to 30 Hz and a 2.2 dB bass lift that gives drums and electric bass a satisfying thump. The catch: Treble climbs to a 4.8 dB peak near 11.9 kHz, which some listeners hear as hiss or shimmer that sits above the music.
Buy the Shuoer Galileo. It is rated higher for sound quality, and saving $0.99 with the Tin HiFi T4 Plus does not make up for the sound-quality gap.
Want more options? Browse the full Headphones rankings.
Specifications Side By Side
| Shuoer Galileo | Tin HiFi T4 Plus | |
|---|---|---|
| Price | $69.99 | $69.00 |
| Ranked | #33 of 450 in In-Ear Headphones | #70 of 450 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Back | Closed | Closed |
| Harman Preference Score | 82 (median of 12 squig.link measurements, calibrated to AutoEQ) | 80 (median of 10 squig.link measurements, calibrated to AutoEQ) |
| Deviation From Target | 1.21 dB standard deviation | 1.39 dB standard deviation |
| Tonal Tilt | -0.13 (negative is warmer, positive brighter) | -0.31 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-1.8 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (-0.4 dB at 30 Hz) |
| Connection | Wired | Wired |
| Driver Type | Hybrid (1 dynamic + 1 balanced armature) | Dynamic |
| Drivers | 1 x 10mm dynamic + 1 x balanced armature | 1 x 10mm dynamic |
| Impedance | 14 ohms | 32 ohms |
| Sensitivity | 104 dB/mW | 106 dB |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) | 10Hz - 20kHz (Manufacturer specified) |
| Built-in Microphone | No | - |
| Weight | - | 0 lbs (4 g) per earbud |
Related Headphone Comparisons
More worthwhile head-to-heads for Shuoer Galileo:
- Truthear x Crinacle Zero RED vs Shuoer Galileo
- Truthear Zero Blue 2 vs Shuoer Galileo
- Shuoer Galileo vs TANGZU XuanNv
- Tin HiFi T4 Plus vs QKZ Khan
- TANGZU XuanNv vs Tin HiFi T4 Plus
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
Shuoer Galileo: $69.99 Amazon eBay
Pros: The median of 12 hobbyist measurements on squig.link gives the Galileo a preference score of 82 with a smooth 1.21 dB deviation. Bass runs about 3.3 dB above target, giving a warm, punchy low end that suits bassy and warm listeners, and sub-bass stays close to target at 30 Hz. The 104 dB/mW sensitivity at 14 ohms makes it easy to drive from a phone.
Cons: The presence region from 3 to 6 kHz sits about 4.1 dB low, which pushes vocals and guitar attack back behind the bass. A 6.5 dB peak near 8.4 kHz and a 5.5 dB dip near 11 kHz make the treble uneven. It is rated below similarly priced rivals such as the EPZ G20 and ThieAudio Legacy 4.
Full Shuoer Galileo review and specifications →
| Released | 2023 (3 years ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 1.21 dB standard deviation |
| Driver Type | Hybrid (1 dynamic + 1 balanced armature) |
| Drivers | 1 x 10mm dynamic + 1 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 82 (median of 12 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 14 ohms |
| Sensitivity | 104 dB/mW |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-1.8 dB at 30 Hz) |
| Tonal Tilt | -0.13 (negative is warmer, positive brighter) |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Tin HiFi T4 Plus: $69.00 Amazon eBay
Pros: Across ten squig.link measurements it scores 80.0 for preference, with sub-bass sitting right on target down to 30 Hz and a 2.2 dB bass lift that gives drums and electric bass a satisfying thump. The midrange stays within about 1 dB of target, and a 3.9 dB air lift keeps it from sounding closed in. At 4 g per earbud and 106 dB sensitivity it is light and easy to drive.
Cons: Treble climbs to a 4.8 dB peak near 11.9 kHz, which some listeners hear as hiss or shimmer that sits above the music. A 3.3 dB dip near 5.9 kHz slightly blunts snare and vocal consonants.
Full Tin HiFi T4 Plus review and specifications →
| Released | Dec 2022 (3 years ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 1.39 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 10Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 80 (median of 10 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 106 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-0.4 dB at 30 Hz) |
| Tonal Tilt | -0.31 (negative is warmer, positive brighter) |
| Weight | 0 lbs (4 g) per earbud |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons