Short answer: the Truthear x Crinacle Zero RED. It ranks #7 of 450 in-ear headphones by sound quality, rated 4.9/5, at $64.99; the Shuoer Galileo ranks #33, rated 4.7/5, and costs $69.99, so there is little reason to consider the other one.
Why pick the Truthear x Crinacle Zero RED: A Harman score of 86 at an entry-level price delivers a well-balanced response with a smooth 1.1 dB deviation. The catch: Presence from 3 to 6 kHz sits about 2.2 dB below target, so vocals and snare attack can sound a little recessed.
Why pick the Shuoer Galileo: The median of 12 hobbyist measurements on squig.link gives the Galileo a preference score of 82 with a smooth 1.21 dB deviation. The tradeoff: The presence region from 3 to 6 kHz sits about 4.1 dB low, which pushes vocals and guitar attack back behind the bass.
Buy the Truthear x Crinacle Zero RED. It is rated higher for sound quality than the Shuoer Galileo and costs less, so it is the default pick unless a specific strength of the other one matters more to you.
Want more options? Browse the full Headphones rankings.
Specifications Side By Side
| Truthear x Crinacle Zero RED | Shuoer Galileo | |
|---|---|---|
| Price | $64.99 | $69.99 |
| Ranked | #7 of 450 in In-Ear Headphones | #33 of 450 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Harman Preference Score | 86 (measured by oratory1990, via AutoEQ) | 82 (median of 12 squig.link measurements, calibrated to AutoEQ) |
| Deviation From Target | 1.10 dB standard deviation | 1.21 dB standard deviation |
| Tonal Tilt | -0.08 (negative is warmer, positive brighter) | -0.13 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-1.8 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (-1.8 dB at 30 Hz) |
| Connection | Wired | Wired |
| Driver Type | Dynamic | Hybrid (1 dynamic + 1 balanced armature) |
| Drivers | 1 x 10mm + 1 x 7.8mm dynamic | 1 x 10mm dynamic + 1 x balanced armature |
| Impedance | 17.5 ohms | 14 ohms |
| Sensitivity | 117.5 dB/Vrms | 104 dB/mW |
| Frequency Response | 20Hz - 40.5kHz (Manufacturer specified) | 20Hz - 20kHz (Manufacturer specified) |
| Back | Closed | Closed |
| Built-in Microphone | - | No |
Related Headphone Comparisons
More top alternatives to Truthear x Crinacle Zero RED:
- EPZ G20 vs Truthear x Crinacle Zero RED
- Truthear x Crinacle Zero RED vs Truthear Zero Blue 2
- Truthear x Crinacle Zero RED vs 7Hz Salnotes Zero
- Truthear x Crinacle Zero RED vs Tin HiFi T3 Plus
- Truthear x Crinacle Zero RED vs Tin HiFi T4
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
Truthear x Crinacle Zero RED: $64.99 Amazon AliExpress eBay
Pros: A Harman score of 86 at an entry-level price delivers a well-balanced response with a smooth 1.1 dB deviation. Bass and mids track the target closely, and the dual dynamic driver design runs easily from a phone at 17.5 ohms and 117.5 dB per volt. It outscores the Tin HiFi T3 Plus by a clear rating margin at a similar cost. It is a good fit for listeners who like a warm, bass-forward sound.
Cons: Presence from 3 to 6 kHz sits about 2.2 dB below target, so vocals and snare attack can sound a little recessed. A 3.9 dB dip near 10.3 kHz and sub-bass about 1.4 dB light mean cymbals lack some shimmer and the deepest bass has less rumble. It is wired only with no mic or remote listed.
Full Truthear x Crinacle Zero RED review and specifications →
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 1.10 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm + 1 x 7.8mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 40.5kHz (Manufacturer specified) |
| Harman Preference Score | 86 (measured by oratory1990, via AutoEQ) |
| Impedance | 17.5 ohms |
| Sensitivity | 117.5 dB/Vrms |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-1.8 dB at 30 Hz) |
| Tonal Tilt | -0.08 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -2.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -0.5 dB | 0.70 |
| Peak | 6,163 Hz | +2.2 dB | 2.44 |
| Peak | 341 Hz | -1.0 dB | 1.46 |
| Peak | 70 Hz | +1.0 dB | 0.61 |
| Peak | 1,284 Hz | -0.6 dB | 2.04 |
| High shelf | 10,000 Hz | -1.8 dB | 0.70 |
| Peak | 2,432 Hz | +0.7 dB | 2.98 |
| Peak | 3,588 Hz | -0.6 dB | 3.06 |
| Peak | 8,541 Hz | +1.1 dB | 3.84 |
| Peak | 769 Hz | +0.2 dB | 3.01 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Shuoer Galileo: $69.99 Amazon eBay
Pros: The median of 12 hobbyist measurements on squig.link gives the Galileo a preference score of 82 with a smooth 1.21 dB deviation. Bass runs about 3.3 dB above target, giving a warm, punchy low end that suits bassy and warm listeners, and sub-bass stays close to target at 30 Hz. The 104 dB/mW sensitivity at 14 ohms makes it easy to drive from a phone.
Cons: The presence region from 3 to 6 kHz sits about 4.1 dB low, which pushes vocals and guitar attack back behind the bass. A 6.5 dB peak near 8.4 kHz and a 5.5 dB dip near 11 kHz make the treble uneven. It is rated below similarly priced rivals such as the EPZ G20 and ThieAudio Legacy 4.
Full Shuoer Galileo review and specifications →
| Released | 2023 (3 years ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 1.21 dB standard deviation |
| Driver Type | Hybrid (1 dynamic + 1 balanced armature) |
| Drivers | 1 x 10mm dynamic + 1 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 82 (median of 12 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 14 ohms |
| Sensitivity | 104 dB/mW |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-1.8 dB at 30 Hz) |
| Tonal Tilt | -0.13 (negative is warmer, positive brighter) |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons