Short answer: the Truthear x Crinacle Zero RED. It ranks #3 of 68 in-ear headphones by sound quality, rated 4.9/5, at $64.99. The Tin HiFi T3 Plus ranks #12, rated 4.3/5, at $59, $5.99 cheaper, a saving that is not big enough to make up the sound-quality gap.
The Truthear x Crinacle Zero RED is the better-sounding pick. A Harman score of 86 at an entry-level price delivers a well-balanced response with a smooth 1.1 dB deviation. The tradeoff: Presence from 3 to 6 kHz sits about 2.2 dB below target, so vocals and snare attack can sound a little recessed.
Why pick the Tin HiFi T3 Plus: Crinacle’s measurement gives a preference score of 77 with a smooth response, a standard deviation of only 1.78 dB around the target. Watch for: The tilt of negative 0.41 means a slightly warm balance, so listeners who want a brighter, airier sound may find it relaxed.
Buy the Truthear x Crinacle Zero RED. It is rated higher for sound quality, and the $5.99 you would save on the Tin HiFi T3 Plus does not close the gap.
Looking for alternatives? See the complete Headphones rankings.
Specifications Side By Side
| Truthear x Crinacle Zero RED | Tin HiFi T3 Plus | |
|---|---|---|
| Price | $64.99 | $59.00 |
| Ranked | #3 of 68 in In-Ear Headphones | #12 of 68 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Harman Preference Score | 86 (measured by oratory1990, via AutoEQ) | 77 (measured by crinacle, via AutoEQ) |
| Deviation From Target | 1.10 dB standard deviation | 1.78 dB standard deviation |
| Tonal Tilt | -0.08 (negative is warmer, positive brighter) | -0.41 (negative is warmer, positive brighter) |
| Connection | Wired | Wired |
| Driver Type | Dynamic | Dynamic |
| Drivers | 1 x 10mm + 1 x 7.8mm dynamic | 1 x 10mm dynamic |
| Impedance | 17.5 ohms | 32 ohms |
| Sensitivity | 117.5 dB/Vrms | 105 dB @ 1kHz, 0.179V |
| Frequency Response | 20Hz - 40.5kHz (Manufacturer specified) | 10Hz - 20kHz (Manufacturer specified) |
| Back | Closed | Closed |
| Built-in Microphone | - | No |
Related Headphone Comparisons
More worthwhile head-to-heads for Truthear x Crinacle Zero RED:
- Truthear x Crinacle Zero RED vs 7Hz Salnotes Zero
- Truthear x Crinacle Zero RED vs Tin HiFi T4
- 7Hz Salnotes Zero vs KZ ZSN Pro X
- Sennheiser IE 200 vs Sony WF-1000XM5
- 7Hz Salnotes Zero vs Truthear Gate
Prices on this page were last checked October 10, 2026 at 5:37 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
Truthear x Crinacle Zero RED: $64.99 Amazon eBay
Pros: A Harman score of 86 at an entry-level price delivers a well-balanced response with a smooth 1.1 dB deviation. Bass and mids track the target closely, and the dual dynamic driver design runs easily from a phone at 17.5 ohms and 117.5 dB per volt. It outscores the Tin HiFi T3 Plus by a clear rating margin at a similar cost. It is a good fit for listeners who like a warm, bass-forward sound.
Cons: Presence from 3 to 6 kHz sits about 2.2 dB below target, so vocals and snare attack can sound a little recessed. A 3.9 dB dip near 10.3 kHz and sub-bass about 1.4 dB light mean cymbals lack some shimmer and the deepest bass has less rumble. It is wired only with no mic or remote listed.
Full Truthear x Crinacle Zero RED review and specifications →
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 1.10 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm + 1 x 7.8mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 40.5kHz (Manufacturer specified) |
| Harman Preference Score | 86 (measured by oratory1990, via AutoEQ) |
| Impedance | 17.5 ohms |
| Sensitivity | 117.5 dB/Vrms |
| Tonal Tilt | -0.08 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -2.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -0.5 dB | 0.70 |
| Peak | 6,163 Hz | +2.2 dB | 2.44 |
| Peak | 341 Hz | -1.0 dB | 1.46 |
| Peak | 70 Hz | +1.0 dB | 0.61 |
| Peak | 1,284 Hz | -0.6 dB | 2.04 |
| High shelf | 10,000 Hz | -1.8 dB | 0.70 |
| Peak | 2,432 Hz | +0.7 dB | 2.98 |
| Peak | 3,588 Hz | -0.6 dB | 3.06 |
| Peak | 8,541 Hz | +1.1 dB | 3.84 |
| Peak | 769 Hz | +0.2 dB | 3.01 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Tin HiFi T3 Plus: $59.00 Amazon eBay
Pros: Crinacle’s measurement gives a preference score of 77 with a smooth response, a standard deviation of only 1.78 dB around the target. A single 10mm dynamic driver at 32 ohms and 105 dB sensitivity runs easily from a phone or dongle. It scores well above the Tin HiFi T4, which has a lower rating at a higher price.
Cons: The tilt of negative 0.41 means a slightly warm balance, so listeners who want a brighter, airier sound may find it relaxed. It has no built-in microphone, so it cannot take calls. It is wired only, with no wireless or noise cancelling features.
Full Tin HiFi T3 Plus review and specifications →
| Back | Closed |
|---|---|
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 1.78 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 10Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 77 (measured by crinacle, via AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 105 dB @ 1kHz, 0.179V |
| Tonal Tilt | -0.41 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -5.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -0.1 dB | 0.70 |
| Peak | 6,867 Hz | +5.9 dB | 1.01 |
| Peak | 163 Hz | -2.4 dB | 0.78 |
| Peak | 683 Hz | +2.7 dB | 0.84 |
| Peak | 3,057 Hz | -2.6 dB | 0.39 |
| High shelf | 10,000 Hz | -4.1 dB | 0.70 |
| Peak | 6,000 Hz | +2.0 dB | 5.50 |
| Peak | 4,522 Hz | -1.6 dB | 4.73 |
| Peak | 3,143 Hz | +0.9 dB | 3.42 |
| Peak | 1,530 Hz | -0.3 dB | 2.49 |
- Reviews, Comparisons and Sound Samples


