Short answer: the Sennheiser IE 200. Both are rated 4.4/5 for sound quality (#9 and #11 of 68 in-ear headphones), and the Sennheiser IE 200 costs $129.95 against $198 for the Sony WF-1000XM5, with sound quality a draw, the lower price decides it.
Why pick the Sennheiser IE 200: Bass and midrange land almost exactly on the Harman target in oratory1990’s measurement, within about 0.5 dB from 60 Hz to 3 kHz, which gives a natural tonal balance and a preference score of 79. Watch for: The presence region from 3 to 6 kHz sits about 5 dB under target, with a 5.7 dB dip near 4.4 kHz, so vocals and snare attacks sound a little recessed.
The case for the Sony WF-1000XM5: Mild bass emphasis, about 1.9 dB above target from 60 to 200 Hz, adds warmth without muddying the midrange, which stays within 0.8 dB of the target for a preference score of 78. The catch: Treble from 6 to 10 kHz runs about 2.2 dB low, with a 4.9 dB dip near 8 kHz, so cymbals and sibilance lose some bite.
Buy the Sennheiser IE 200. Both are rated the same for sound quality, and it costs $68.05 less than the Sony WF-1000XM5.
Want more options? Browse the full Headphones rankings.
Specifications Side By Side
| Sennheiser IE 200 | Sony WF-1000XM5 | |
|---|---|---|
| Price | $129.95 | $198.00 |
| Ranked | #9 of 68 in In-Ear Headphones | #11 of 68 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Harman Preference Score | 79 (measured by oratory1990, via AutoEQ) | 78 (measured by oratory1990, via AutoEQ) |
| Deviation From Target | 1.86 dB standard deviation | 1.87 dB standard deviation |
| Tonal Tilt | -0.02 (negative is warmer, positive brighter) | -0.18 (negative is warmer, positive brighter) |
| Connection | Wired | True wireless |
| Driver Type | Dynamic | Dynamic |
| Drivers | 1 x 7mm dynamic | 1 x 8.4mm dynamic |
| Impedance | 16 ohms | - |
| Sensitivity | 119 dB SPL/V | - |
| Weight | 0 lbs (4 g) per earphone | 0 lbs (5.9 g) per earbud |
| Frequency Response | 6Hz - 20kHz (Manufacturer specified) | 20Hz - 20kHz (Manufacturer specified) |
| Back | Closed | Closed |
| Active Noise Cancelling | - | Yes |
| Battery Life | - | 8 hours (24 with case, Manufacturer specified) |
| Bluetooth Version | - | 5.3 |
| Bluetooth Codecs | - | SBC, AAC, LDAC |
| Built-in Microphone | - | Yes |
| IP Rating | - | IPX4 |
Related Headphone Comparisons
More top alternatives to Sennheiser IE 200:
- Sennheiser IE 200 vs Sennheiser IE 900
- Etymotic EVO vs Sony WF-1000XM5
- Truthear x Crinacle Zero RED vs Tin HiFi T3 Plus
- 7Hz Salnotes Zero vs Truthear Gate
- AUNE Jasper vs Beats Powerbeats Pro
Prices on this page were last checked October 10, 2026 at 5:37 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
Sennheiser IE 200: $129.95 Amazon eBay
Pros: Bass and midrange land almost exactly on the Harman target in oratory1990’s measurement, within about 0.5 dB from 60 Hz to 3 kHz, which gives a natural tonal balance and a preference score of 79. At 16 ohms and 119 dB SPL/V sensitivity it plays loud straight from a phone with no amp. Each earpiece weighs only 4 g, and the single 7mm dynamic driver is a simple, wired design with no battery to charge.
Cons: The presence region from 3 to 6 kHz sits about 5 dB under target, with a 5.7 dB dip near 4.4 kHz, so vocals and snare attacks sound a little recessed. The top octave runs about 5.8 dB hot, which adds sparkle that can read as thin or bright on some recordings. The Final Audio A4000 and Shuoer S12 carry higher ratings at lower prices.
Full Sennheiser IE 200 review and specifications →
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 1.86 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 7mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 6Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 79 (measured by oratory1990, via AutoEQ) |
| Impedance | 16 ohms |
| Sensitivity | 119 dB SPL/V |
| Tonal Tilt | -0.02 (negative is warmer, positive brighter) |
| Weight | 0 lbs (4 g) per earphone |
EQ preset to match the Harman target
Set a preamp of -4.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +0.3 dB | 0.70 |
| Peak | 4,135 Hz | +4.3 dB | 1.83 |
| Peak | 1,520 Hz | -1.9 dB | 1.99 |
| Peak | 180 Hz | -1.2 dB | 1.14 |
| Peak | 67 Hz | +1.0 dB | 1.34 |
| High shelf | 10,000 Hz | -6.1 dB | 0.70 |
| Peak | 727 Hz | +0.8 dB | 1.79 |
| Peak | 5,480 Hz | +1.2 dB | 3.96 |
| Peak | 1,154 Hz | -0.6 dB | 3.44 |
| Peak | 2,978 Hz | +0.4 dB | 3.96 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Sony WF-1000XM5: $198.00 Amazon eBay
Pros: Mild bass emphasis, about 1.9 dB above target from 60 to 200 Hz, adds warmth without muddying the midrange, which stays within 0.8 dB of the target for a preference score of 78. Active noise cancelling, LDAC, AAC and SBC support, Bluetooth 5.3 and an IPX4 rating make it a full-featured true wireless set. Battery lasts about 8 hours per charge, 24 with the case, and each bud weighs 5.9 g.
Cons: Treble from 6 to 10 kHz runs about 2.2 dB low, with a 4.9 dB dip near 8 kHz, so cymbals and sibilance lose some bite. A 2.9 dB peak near 10.6 kHz can add a touch of artificial shimmer. Sub-bass sits about 1.9 dB below target, so the bass is punchy more than deep. The wired Sennheiser IE 200 matches its rating at a lower price and without charging.
Full Sony WF-1000XM5 review and specifications →
| Released | Jul 2023 (3 years ago) |
|---|---|
| Active Noise Cancelling | Yes |
| Back | Closed |
| Battery Life | 8 hours (24 with case, Manufacturer specified) |
| Bluetooth Codecs | SBC, AAC, LDAC |
| Bluetooth Version | 5.3 |
| Built-in Microphone | Yes |
| Connection | True wireless |
| Deviation From Target | 1.87 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 8.4mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 78 (measured by oratory1990, via AutoEQ) |
| IP Rating | IPX4 |
| Tonal Tilt | -0.18 (negative is warmer, positive brighter) |
| Weight | 0 lbs (5.9 g) per earbud |
EQ preset to match the Harman target
Set a preamp of -2.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +5.4 dB | 0.70 |
| Peak | 68 Hz | -4.8 dB | 0.27 |
| Peak | 1,377 Hz | +2.6 dB | 0.31 |
| Peak | 1,806 Hz | -3.5 dB | 1.16 |
| Peak | 6,875 Hz | +1.8 dB | 3.49 |
| High shelf | 10,000 Hz | +2.3 dB | 0.70 |
| Peak | 3,757 Hz | +0.3 dB | 2.56 |
| Peak | 5,057 Hz | -0.7 dB | 5.70 |
| Peak | 449 Hz | +0.3 dB | 4.15 |
| Peak | 677 Hz | -0.2 dB | 2.75 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons


