Sennheiser IE 200 vs Sennheiser IE 900

Last updated: October 10, 2026

Short answer: the Sennheiser IE 200. It ranks #9 of 68 in-ear headphones by sound quality, rated 4.4/5, at $129.95; the Sennheiser IE 900 ranks #52, rated 3.1/5, and costs $1,299.95, which makes this an easy call rather than a real tradeoff.

Sennheiser IE 200 vs Sennheiser IE 900

The Sennheiser IE 200 is the better-sounding option. Bass and midrange land almost exactly on the Harman target in oratory1990’s measurement, within about 0.5 dB from 60 Hz to 3 kHz, which gives a natural tonal balance and a preference score of 79. The catch: The presence region from 3 to 6 kHz sits about 5 dB under target, with a 5.7 dB dip near 4.4 kHz, so vocals and snare attacks sound a little recessed.

What the Sennheiser IE 900 does well: Oratory1990 measured sub-bass and bass within about 1.2 dB of target, so the low end is tidy and controlled. Watch for: Presence from 3 to 6 kHz is about 6.7 dB below the Harman target, with an 8.8 dB dip near 3.6 kHz, which recesses vocals and removes some bite.

Buy the Sennheiser IE 200. It is rated higher for sound quality than the Sennheiser IE 900 and costs less, which makes it the one to get unless you need something the other one does better.

Want more options? Browse the full Headphones rankings.

Specifications Side By Side

Sennheiser IE 200 Sennheiser IE 900
Price$129.95$1,299.95
Ranked#9 of 68 in In-Ear Headphones#52 of 68 in In-Ear Headphones
Form FactorIn-earIn-ear
Harman Preference Score79 (measured by oratory1990, via AutoEQ)63 (measured by oratory1990, via AutoEQ)
Deviation From Target1.86 dB standard deviation2.82 dB standard deviation
Tonal Tilt-0.02 (negative is warmer, positive brighter)-0.92 (negative is warmer, positive brighter)
ConnectionWiredWired
Driver TypeDynamicDynamic
Drivers1 x 7mm dynamic1 x 7mm dynamic
Impedance16 ohms16 ohms
Sensitivity119 dB SPL/V123 dB SPL/V
Weight0 lbs (4 g) per earphone-
Frequency Response6Hz - 20kHz (Manufacturer specified)5Hz - 48kHz (Manufacturer specified)
BackClosedClosed

How Sennheiser IE 200 compares with other leading options:

Prices on this page were last checked October 10, 2026 at 5:37 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Headphones In Full

Sennheiser IE 200: $129.95 Amazon eBay

Sennheiser IE 200 ranking card

Pros: Bass and midrange land almost exactly on the Harman target in oratory1990’s measurement, within about 0.5 dB from 60 Hz to 3 kHz, which gives a natural tonal balance and a preference score of 79. At 16 ohms and 119 dB SPL/V sensitivity it plays loud straight from a phone with no amp. Each earpiece weighs only 4 g, and the single 7mm dynamic driver is a simple, wired design with no battery to charge.

Cons: The presence region from 3 to 6 kHz sits about 5 dB under target, with a 5.7 dB dip near 4.4 kHz, so vocals and snare attacks sound a little recessed. The top octave runs about 5.8 dB hot, which adds sparkle that can read as thin or bright on some recordings. The Final Audio A4000 and Shuoer S12 carry higher ratings at lower prices.

BackClosed
ConnectionWired
Deviation From Target1.86 dB standard deviation
Driver TypeDynamic
Drivers1 x 7mm dynamic
Form FactorIn-ear
Frequency Response6Hz - 20kHz (Manufacturer specified)
Harman Preference Score79 (measured by oratory1990, via AutoEQ)
Impedance16 ohms
Sensitivity119 dB SPL/V
Tonal Tilt-0.02 (negative is warmer, positive brighter)
Weight0 lbs (4 g) per earphone
EQ preset to match the Harman target

Set a preamp of -4.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.

FilterFrequencyGainQ
Low shelf105 Hz+0.3 dB0.70
Peak4,135 Hz+4.3 dB1.83
Peak1,520 Hz-1.9 dB1.99
Peak180 Hz-1.2 dB1.14
Peak67 Hz+1.0 dB1.34
High shelf10,000 Hz-6.1 dB0.70
Peak727 Hz+0.8 dB1.79
Peak5,480 Hz+1.2 dB3.96
Peak1,154 Hz-0.6 dB3.44
Peak2,978 Hz+0.4 dB3.96

Sennheiser IE 900: $1,299.95 Amazon eBay

Sennheiser IE 900 ranking card

Pros: Oratory1990 measured sub-bass and bass within about 1.2 dB of target, so the low end is tidy and controlled. Sensitivity of 123 dB SPL/V and a 16 ohm impedance make it easy to drive from a phone, and the 7mm dynamic driver is rated to reach from 5 Hz to 48 kHz. Top-octave air sits about 3.6 dB above target for an open, detailed treble.

Cons: Presence from 3 to 6 kHz is about 6.7 dB below the Harman target, with an 8.8 dB dip near 3.6 kHz, which recesses vocals and removes some bite. A preference score of 63 is modest for such a premium product, and the HIFIMAN RE2000 has a higher rating at a lower price.

Released2021 (5 years ago)
BackClosed
ConnectionWired
Deviation From Target2.82 dB standard deviation
Driver TypeDynamic
Drivers1 x 7mm dynamic
Form FactorIn-ear
Frequency Response5Hz - 48kHz (Manufacturer specified)
Harman Preference Score63 (measured by oratory1990, via AutoEQ)
Impedance16 ohms
Sensitivity123 dB SPL/V
Tonal Tilt-0.92 (negative is warmer, positive brighter)
EQ preset to match the Harman target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.

FilterFrequencyGainQ
Low shelf105 Hz-2.3 dB0.70
Peak4,081 Hz+5.0 dB2.86
Peak204 Hz-2.6 dB1.13
Peak1,472 Hz-2.7 dB2.33
Peak2,956 Hz+5.2 dB2.42
High shelf10,000 Hz-4.4 dB0.70
Peak67 Hz+0.6 dB1.76
Peak26 Hz-0.9 dB3.19
Peak729 Hz+0.4 dB2.54
Peak376 Hz-0.4 dB2.69