Short answer: the Revel F228Be. It ranks #17 of 73 floorstanding speakers by sound quality, rated 4.5/5, at $9,000; the Perlisten R7t ranks #32, rated 4.3/5, and costs $9,990, which makes this an easy call rather than a real tradeoff.
Why pick the Revel F228Be: CEA2034 spinorama shows an essentially flat on-axis response with very nice directivity. The catch: Minimum impedance dips to 3.4 ohms with a secondary rise around 2kHz, calling for an amplifier comfortable with a demanding load.
The case for the Perlisten R7t: The flagship of Perlisten’s R-series towers, a 4-way design with four 165mm woofers reaching a measured -3dB extension point of 49.1Hz. The catch: Listening-window smoothness (0.567) and sound-power smoothness (0.380) are middling for a flagship-tier tower, with on-axis deviation of 0.341dB, a fairly pronounced -0.29dB per octave downward tilt, and a predicted in-room smoothness of just 0.44.
Buy the Revel F228Be. It is rated higher for sound quality than the Perlisten R7t and costs less, so only choose the other one for a particular feature it does better.
Looking for alternatives? See the complete Passive Home rankings.
Specifications Side By Side
| Revel F228Be | Perlisten R7t | |
|---|---|---|
| Price | $9,000 per pair | $9,990 per pair |
| Ranked | #17 of 73 in Large Size Floorstanding Speakers | #32 of 73 in Large Size Floorstanding Speakers |
| Bass Extension (-10dB) | 25Hz (measured, Audio Science Review) | - |
| Bass Extension (-3dB) | 61Hz (measured, Audio Science Review) | 49.1Hz (manufacturer spinorama data, vented configuration) |
| Dimensions | 50.9”H x 13.5”W x 17.6”D (1292.9 x 342.9 x 447 mm) | 49.9”H x 9.1”W x 13.8”D (1268 x 230 x 350 mm) |
| Impedance | 8 ohms | 4 ohms nominal, 3.1 ohms minimum |
| Drivers | Dual 8” (200mm) Deep Ceramic Composite aluminum cones, with cast frames woofers, 5-1/4” (130mm) Deep Ceramic Composite aluminum cone, with cast frame midrange, 1” (25mm) Beryllium dome, with acoustic lens waveguide tweeter | 3x 26mm silk dome (tweeter + 2 midrange), 4x 165mm (6.5”) HPF woofers |
| Sensitivity | 89.3dB (300Hz-3kHz @ 2.83V/1m, measured by Audio Science Review; 90dB manufacturer specified) | 90.0dB @ 2.83V/1m |
| Weight | 112.4 lbs (51 kg) each | 105.8 lbs (48.0 kg) each |
| Woofer Cabinet | ported, front | - |
| Spinorama Preference Score | 6.01 | 6.31 |
| Spinorama Preference Score with Perfect Sub | 7.51 | 8.12 |
| DIY Kit | No | No |
| Enclosure | - | 4-way, bass-reflex / acoustic-suspension convertible |
| Bass Extension | - | 27Hz in bass-reflex mode |
| Country | - | Designed in the United States (Verona, Wisconsin) |
Related Speaker Comparisons
More worthwhile head-to-heads for Revel F228Be:
- KEF Blade Two Meta vs Revel F228Be
- MoFi SourcePoint V10 Master Edition vs Revel F228Be
- MoFi SourcePoint 888 vs Revel F228Be
- Revel F228Be vs Revel F328Be
- Radiant Acoustics Clarity 66 vs Revel F228Be
Prices on this page were last checked September 29, 2026 at 3:43 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Revel F228Be: $9,000 per pair Crutchfield eBay
Older model: the Revel F208 (ranked higher, rated 4.5/5).
Pros: CEA2034 spinorama shows an essentially flat on-axis response with very nice directivity. Predicted in-room response is nearly perfect, with a smooth slope down from bass to treble. Horizontal beamwidth of about ±70 degrees is wide and holds up well until narrowing above 8kHz. Vertical directivity offers more degrees of listening-height freedom than a typical bookshelf design, a benefit of this tower’s driver layout. Distortion is extremely low across the full audio range at 86dB SPL/1m and stays comfortable even at 96dB SPL/1m. Near-field measurements of the individual drivers show nice, well-integrated crossover behavior with only low-level resonances. Measured bass extension of 61Hz (-3dB), with a measured sensitivity of 89.3dB.
Cons: Minimum impedance dips to 3.4 ohms with a secondary rise around 2kHz, calling for an amplifier comfortable with a demanding load. Very expensive and very heavy (51 kg each).
Full Revel F228Be review and specifications →
| Bass Extension (-10dB) | 25Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 61Hz (measured, Audio Science Review) |
| DIY Kit | No |
| Dimensions | 50.9”H x 13.5”W x 17.6”D (1292.9 x 342.9 x 447 mm) |
| Drivers | Dual 8” (200mm) Deep Ceramic Composite aluminum cones, with cast frames woofers, 5-1/4” (130mm) Deep Ceramic Composite aluminum cone, with cast frame midrange, 1” (25mm) Beryllium dome, with acoustic lens waveguide tweeter |
| Impedance | 8 ohms |
| Sensitivity | 89.3dB (300Hz-3kHz @ 2.83V/1m, measured by Audio Science Review; 90dB manufacturer specified) |
| Spinorama Preference Score | 6.01 |
| Spinorama Preference Score with Perfect Sub | 7.51 |
| Weight | 112.4 lbs (51 kg) each |
| Woofer Cabinet | ported, front |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Perlisten R7t: $9,990 per pair Audio Advice eBay
Pros: The flagship of Perlisten’s R-series towers, a 4-way design with four 165mm woofers reaching a measured -3dB extension point of 49.1Hz. The Harman in-room extension estimate (lfx) is a deeper 38Hz, since that metric accounts for room gain the anechoic -3dB figure doesn’t. Sensitivity of 90.0dB makes it easy to drive at high output.
Cons: Listening-window smoothness (0.567) and sound-power smoothness (0.380) are middling for a flagship-tier tower, with on-axis deviation of 0.341dB, a fairly pronounced -0.29dB per octave downward tilt, and a predicted in-room smoothness of just 0.44. It’s sold only through specialty AV dealers at a per-unit price.
Full Perlisten R7t review and specifications →
| Bass Extension | 27Hz in bass-reflex mode |
|---|---|
| Bass Extension (-3dB) | 49.1Hz (manufacturer spinorama data, vented configuration) |
| Country | Designed in the United States (Verona, Wisconsin) |
| DIY Kit | No |
| Dimensions | 49.9”H x 9.1”W x 13.8”D (1268 x 230 x 350 mm) |
| Drivers | 3x 26mm silk dome (tweeter + 2 midrange), 4x 165mm (6.5”) HPF woofers |
| Enclosure | 4-way, bass-reflex / acoustic-suspension convertible |
| Impedance | 4 ohms nominal, 3.1 ohms minimum |
| Sensitivity | 90.0dB @ 2.83V/1m |
| Spinorama Preference Score | 6.31 |
| Spinorama Preference Score with Perfect Sub | 8.12 |
| Weight | 105.8 lbs (48.0 kg) each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons