RCF NX 945-A vs Yamaha DXR15mkIII

Last updated: September 7, 2026

Short answer: choose between the RCF NX 945-A and Yamaha DXR15mkIII for the requirements of the venue and system, not from rank alone. In this size class, coverage, bass extension, output capability, DSP, cabinet construction, and service support often decide the better fit.

Why choose the RCF NX 945-A. The top NX-series 15-inch box pairs a plywood cabinet with a 135dB claimed peak, the highest in the NX range, and a wide 100° x 70° pattern. RCF’s FiRPHASE and Bass Motion Control processing carry over from the smaller NX models.

Why choose the Yamaha DXR15mkIII. The third-generation DXR15 raises claimed output to 134dB with 2000W amplification, app-based control and Yamaha’s newest onboard DSP, while its 90° x 60° pattern matches the well-regarded DXR12mkIII.

What to weigh before buying. The measurement is truncated and does not produce a preference score, so its tonal position relies on published engineering rather than a confirmed result. At 27.3kg it is heavier than the ART 945-A alternative. The low-quality local data is truncated and cannot produce a preference score, so its tonal advantage over the proven DXR15mkII is unconfirmed. Wireless connectivity is for remote control, not audio streaming.

Buy the RCF NX 945-A when its stated coverage, output, processing, and deployment format best match the job.

Buy the Yamaha DXR15mkIII when its stated strengths are the better match for the room and the rest of the PA.

RCF NX 945-A vs Yamaha DXR15mkIII

Specifications Side By Side

RCF NX 945-A Yamaha DXR15mkIII
Price$2,299.00$1,099.99
Ranked#5 of 29 in 15-Inch Two-Way Powered PA Speakers#12 of 29 in 15-Inch Two-Way Powered PA Speakers
ConfigurationActive 2-way bass-reflex PA speakerActive 2-way bass-reflex PA speaker
Drivers15" woofer, compression driver15" woofer, 1" throat/1.75" diaphragm compression driver
Frequency Response45Hz - 20kHz (manufacturer specified)46Hz - 20kHz (-10dB, manufacturer specified)
Dimensions27.8"H x 16.5"W x 17.8"D (705 x 420 x 451 mm)27.5"H x 17.6"W x 15"D (699 x 447 x 380 mm)
Coverage100° x 70°90° x 60°
Maximum SPL135dB peak (manufacturer specified)134dB peak (manufacturer specified)
InputsXLR/TRS combo input and XLR output2 x XLR/TRS combo; XLR thru and DSP outputs
Amplifier Power2100W peak (1400W LF + 700W HF)2000W peak / 1000W RMS (1700W LF + 300W HF peak)
Crossover Frequency650Hz1800Hz (FIR-X)
Cabinet MaterialPlywoodPP plastic
RiggingM10 and quick-lock rigging; 35mm pole mount3 x M10 points plus U-bracket points; 35mm dual-angle pole mount
Bass Extension (-3dB)65Hz (measured, vendor Spinorama data)54.5Hz (measured, vendor Spinorama data)
DSPYes, FiRPHASE and Bass Motion ControlYes, FIR-X tuning, Drive Motion Calibration and D-Remote
BluetoothNoBluetooth 5.0 audio streaming and D-Remote control
Weight60.2 lbs / 27.3 kg46.3 lbs / 21 kg

More useful head-to-heads from the same speaker class:

Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

RCF NX 945-A: $2,299.00 Amazon B&H Photo Video Guitar Center eBay

RCF NX 945-A ranking card

Pros: The top NX-series 15-inch box pairs a plywood cabinet with a 135dB claimed peak, the highest in the NX range, and a wide 100° x 70° pattern. RCF’s FiRPHASE and Bass Motion Control processing carry over from the smaller NX models.

Cons: The measurement is truncated and does not produce a preference score, so its tonal position relies on published engineering rather than a confirmed result. At 27.3kg it is heavier than the ART 945-A alternative.

Amplifier Power2100W peak (1400W LF + 700W HF)
Bass Extension (-3dB)65Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialPlywood
ConfigurationActive 2-way bass-reflex PA speaker
Coverage100° x 70°
Crossover Frequency650Hz
DSPYes, FiRPHASE and Bass Motion Control
Dimensions27.8"H x 16.5"W x 17.8"D (705 x 420 x 451 mm)
Drivers15" woofer, compression driver
Frequency Response45Hz - 20kHz (manufacturer specified)
InputsXLR/TRS combo input and XLR output
Maximum SPL135dB peak (manufacturer specified)
RiggingM10 and quick-lock rigging; 35mm pole mount
Weight60.2 lbs / 27.3 kg

Yamaha DXR15mkIII: $1,099.99 Amazon B&H Photo Video Guitar Center eBay

Yamaha DXR15mkIII ranking card

Pros: The third-generation DXR15 raises claimed output to 134dB with 2000W amplification, app-based control and Yamaha’s newest onboard DSP, while its 90° x 60° pattern matches the well-regarded DXR12mkIII.

Cons: The low-quality local data is truncated and cannot produce a preference score, so its tonal advantage over the proven DXR15mkII is unconfirmed. Wireless connectivity is for remote control, not audio streaming.

Amplifier Power2000W peak / 1000W RMS (1700W LF + 300W HF peak)
Bass Extension (-3dB)54.5Hz (measured, vendor Spinorama data)
BluetoothBluetooth 5.0 audio streaming and D-Remote control
Cabinet MaterialPP plastic
ConfigurationActive 2-way bass-reflex PA speaker
Coverage90° x 60°
Crossover Frequency1800Hz (FIR-X)
DSPYes, FIR-X tuning, Drive Motion Calibration and D-Remote
Dimensions27.5"H x 17.6"W x 15"D (699 x 447 x 380 mm)
Drivers15" woofer, 1" throat/1.75" diaphragm compression driver
Frequency Response46Hz - 20kHz (-10dB, manufacturer specified)
Inputs2 x XLR/TRS combo; XLR thru and DSP outputs
Maximum SPL134dB peak (manufacturer specified)
Rigging3 x M10 points plus U-bracket points; 35mm dual-angle pole mount
Weight46.3 lbs / 21 kg