RCF KX 45-A vs RCF NX 945-A

Last updated: September 7, 2026

Short answer: choose between the RCF KX 45-A and RCF NX 945-A for the deployment, not from the automatic ranking alone. Their driver format, power requirements, coverage, bass reach, output capability, and control features determine which is the more practical PA for a particular room or system.

The case for the RCF KX 45-A. RCF’s flagship 15-inch point source pairs a 3200W amplifier with a 3-inch titanium-dome compression driver, RDNet remote control and a 137dB claimed peak, the highest maximum-output claim in this ranking. Rotatable 100° x 70° coverage suits both main and monitor use.

The case for the RCF NX 945-A. The top NX-series 15-inch box pairs a plywood cabinet with a 135dB claimed peak, the highest in the NX range, and a wide 100° x 70° pattern. RCF’s FiRPHASE and Bass Motion Control processing carry over from the smaller NX models.

Important trade-offs. The local measurement is truncated and cannot produce a preference score. At 28.4kg it is one of the heaviest boxes here, and pricing/retail availability are not yet established. The measurement is truncated and does not produce a preference score, so its tonal position relies on published engineering rather than a confirmed result. At 27.3kg it is heavier than the ART 945-A alternative.

Buy the RCF KX 45-A when its stated format, coverage, and system features fit the job better.

Buy the RCF NX 945-A when its stated output, control, and deployment strengths better match the system.

RCF KX 45-A vs RCF NX 945-A

Specifications Side By Side

RCF KX 45-A RCF NX 945-A
Price$4,620.00$2,299.00
Ranked#3 of 29 in 15-Inch Two-Way Powered PA Speakers#5 of 29 in 15-Inch Two-Way Powered PA Speakers
ConfigurationActive 2-way bass-reflex point-source PA speakerActive 2-way bass-reflex PA speaker
Drivers15" neodymium woofer, 1.4" exit/3" dome compression driver15" woofer, compression driver
Frequency Response50Hz - 20kHz (manufacturer specified)45Hz - 20kHz (manufacturer specified)
Dimensions27.8"H x 16.5"W x 16.9"D (705 x 419.6 x 430 mm)27.8"H x 16.5"W x 17.8"D (705 x 420 x 451 mm)
Coverage100° x 70°, rotatable100° x 70°
Maximum SPL137dB peak (manufacturer specified)135dB peak (manufacturer specified)
InputsXLR audio input/link and EtherCON RDNetXLR/TRS combo input and XLR output
Amplifier Power3200W peak (2000W LF + 1200W HF)2100W peak (1400W LF + 700W HF)
Crossover Frequency750Hz650Hz
Cabinet MaterialBaltic birch plywoodPlywood
RiggingQuick-lock rigging; 6 x M10 inserts; 35mm pole mountM10 and quick-lock rigging; 35mm pole mount
Network ControlRDNet-
DSPYes, FiRPHASE, Bass Motion Control, presets and RDNetYes, FiRPHASE and Bass Motion Control
BluetoothNoNo
Weight62.6 lbs / 28.4 kg60.2 lbs / 27.3 kg
Bass Extension (-3dB)-65Hz (measured, vendor Spinorama data)

Other pairings from the same speaker class worth checking:

Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

RCF KX 45-A: $4,620.00 B&H Photo Video Guitar Center eBay

RCF KX 45-A ranking card

Pros: RCF’s flagship 15-inch point source pairs a 3200W amplifier with a 3-inch titanium-dome compression driver, RDNet remote control and a 137dB claimed peak, the highest maximum-output claim in this ranking. Rotatable 100° x 70° coverage suits both main and monitor use.

Cons: The local measurement is truncated and cannot produce a preference score. At 28.4kg it is one of the heaviest boxes here, and pricing/retail availability are not yet established.

Amplifier Power3200W peak (2000W LF + 1200W HF)
BluetoothNo
Cabinet MaterialBaltic birch plywood
ConfigurationActive 2-way bass-reflex point-source PA speaker
Coverage100° x 70°, rotatable
Crossover Frequency750Hz
DSPYes, FiRPHASE, Bass Motion Control, presets and RDNet
Dimensions27.8"H x 16.5"W x 16.9"D (705 x 419.6 x 430 mm)
Drivers15" neodymium woofer, 1.4" exit/3" dome compression driver
Frequency Response50Hz - 20kHz (manufacturer specified)
InputsXLR audio input/link and EtherCON RDNet
Maximum SPL137dB peak (manufacturer specified)
Network ControlRDNet
RiggingQuick-lock rigging; 6 x M10 inserts; 35mm pole mount
Weight62.6 lbs / 28.4 kg

RCF NX 945-A: $2,299.00 Amazon B&H Photo Video Guitar Center eBay

RCF NX 945-A ranking card

Pros: The top NX-series 15-inch box pairs a plywood cabinet with a 135dB claimed peak, the highest in the NX range, and a wide 100° x 70° pattern. RCF’s FiRPHASE and Bass Motion Control processing carry over from the smaller NX models.

Cons: The measurement is truncated and does not produce a preference score, so its tonal position relies on published engineering rather than a confirmed result. At 27.3kg it is heavier than the ART 945-A alternative.

Amplifier Power2100W peak (1400W LF + 700W HF)
Bass Extension (-3dB)65Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialPlywood
ConfigurationActive 2-way bass-reflex PA speaker
Coverage100° x 70°
Crossover Frequency650Hz
DSPYes, FiRPHASE and Bass Motion Control
Dimensions27.8"H x 16.5"W x 17.8"D (705 x 420 x 451 mm)
Drivers15" woofer, compression driver
Frequency Response45Hz - 20kHz (manufacturer specified)
InputsXLR/TRS combo input and XLR output
Maximum SPL135dB peak (manufacturer specified)
RiggingM10 and quick-lock rigging; 35mm pole mount
Weight60.2 lbs / 27.3 kg