RCF NX 945-A vs Yamaha DXR15mkII

Last updated: September 7, 2026

Short answer: choose between the RCF NX 945-A and Yamaha DXR15mkII for the requirements of the venue and system, not from rank alone. In this size class, coverage, bass extension, output capability, DSP, cabinet construction, and service support often decide the better fit.

Why choose the RCF NX 945-A. The top NX-series 15-inch box pairs a plywood cabinet with a 135dB claimed peak, the highest in the NX range, and a wide 100° x 70° pattern. RCF’s FiRPHASE and Bass Motion Control processing carry over from the smaller NX models.

Why choose the Yamaha DXR15mkII. A proven, broadly distributed workhorse: medium-quality vendor data shows a 4.37 ideal-subwoofer preference score with 61Hz measured extension, and Yamaha’s FIR-X processing and D-CONTOUR presets simplify setup.

What to weigh before buying. The measurement is truncated and does not produce a preference score, so its tonal position relies on published engineering rather than a confirmed result. At 27.3kg it is heavier than the ART 945-A alternative. The preference score sits mid-pack for this ranking, and it lacks app control or Bluetooth audio found on some newer competitors.

Buy the RCF NX 945-A when its stated coverage, output, processing, and deployment format best match the job.

Buy the Yamaha DXR15mkII when its stated strengths are the better match for the room and the rest of the PA.

RCF NX 945-A vs Yamaha DXR15mkII

Specifications Side By Side

RCF NX 945-A Yamaha DXR15mkII
Price$2,299.00$899.99
Ranked#5 of 29 in 15-Inch Two-Way Powered PA Speakers#14 of 29 in 15-Inch Two-Way Powered PA Speakers
ConfigurationActive 2-way bass-reflex PA speakerActive 2-way bass-reflex PA speaker
Drivers15" woofer, compression driver15" woofer, 1.75" compression driver
Frequency Response45Hz - 20kHz (manufacturer specified)49Hz - 20kHz (-10dB, manufacturer specified)
Dimensions27.8"H x 16.5"W x 17.8"D (705 x 420 x 451 mm)27.6"H x 17.5"W x 15"D (700 x 445 x 380 mm)
Coverage100° x 70°-
Maximum SPL135dB peak (manufacturer specified)134dB peak (manufacturer specified)
InputsXLR/TRS combo input and XLR outputXLR, dual 1/4-inch, stereo RCA; XLR thru and link outputs
Amplifier Power2100W peak (1400W LF + 700W HF)1100W dynamic / 700W continuous (950W LF + 150W HF dynamic)
Crossover Frequency650Hz-
Cabinet MaterialPlywoodMatte-finish ABS
RiggingM10 and quick-lock rigging; 35mm pole mount3 x M10 points; 35mm dual-angle pole mount
Bass Extension (-3dB)65Hz (measured, vendor Spinorama data)67Hz (measured, vendor Spinorama data)
DSPYes, FiRPHASE and Bass Motion ControlYes
BluetoothNoNo
Weight60.2 lbs / 27.3 kg48.1 lbs / 21.8 kg

Other pairings from the same speaker class worth checking:

Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

RCF NX 945-A: $2,299.00 Amazon B&H Photo Video Guitar Center eBay

RCF NX 945-A ranking card

Pros: The top NX-series 15-inch box pairs a plywood cabinet with a 135dB claimed peak, the highest in the NX range, and a wide 100° x 70° pattern. RCF’s FiRPHASE and Bass Motion Control processing carry over from the smaller NX models.

Cons: The measurement is truncated and does not produce a preference score, so its tonal position relies on published engineering rather than a confirmed result. At 27.3kg it is heavier than the ART 945-A alternative.

Amplifier Power2100W peak (1400W LF + 700W HF)
Bass Extension (-3dB)65Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialPlywood
ConfigurationActive 2-way bass-reflex PA speaker
Coverage100° x 70°
Crossover Frequency650Hz
DSPYes, FiRPHASE and Bass Motion Control
Dimensions27.8"H x 16.5"W x 17.8"D (705 x 420 x 451 mm)
Drivers15" woofer, compression driver
Frequency Response45Hz - 20kHz (manufacturer specified)
InputsXLR/TRS combo input and XLR output
Maximum SPL135dB peak (manufacturer specified)
RiggingM10 and quick-lock rigging; 35mm pole mount
Weight60.2 lbs / 27.3 kg

Yamaha DXR15mkII: $899.99 Amazon B&H Photo Video Guitar Center eBay

Yamaha DXR15mkII ranking card

Pros: A proven, broadly distributed workhorse: medium-quality vendor data shows a 4.37 ideal-subwoofer preference score with 61Hz measured extension, and Yamaha’s FIR-X processing and D-CONTOUR presets simplify setup.

Cons: The preference score sits mid-pack for this ranking, and it lacks app control or Bluetooth audio found on some newer competitors.

Amplifier Power1100W dynamic / 700W continuous (950W LF + 150W HF dynamic)
Bass Extension (-3dB)67Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialMatte-finish ABS
ConfigurationActive 2-way bass-reflex PA speaker
DSPYes
Dimensions27.6"H x 17.5"W x 15"D (700 x 445 x 380 mm)
Drivers15" woofer, 1.75" compression driver
Frequency Response49Hz - 20kHz (-10dB, manufacturer specified)
InputsXLR, dual 1/4-inch, stereo RCA; XLR thru and link outputs
Maximum SPL134dB peak (manufacturer specified)
Rigging3 x M10 points; 35mm dual-angle pole mount
Weight48.1 lbs / 21.8 kg