RCF NX 945-A vs RCF ART 715-A MK5

Last updated: September 7, 2026

Short answer: these RCF NX 945-A and RCF ART 715-A MK5 alternatives share a brand and size class, but their coverage, driver architecture, cabinet format, processing, and output priorities can make them fit very different jobs.

Why choose the RCF NX 945-A. The top NX-series 15-inch box pairs a plywood cabinet with a 135dB claimed peak, the highest in the NX range, and a wide 100° x 70° pattern. RCF’s FiRPHASE and Bass Motion Control processing carry over from the smaller NX models.

Why choose the RCF ART 715-A MK5. A compact, affordable RCF with 130dB claimed output and FiRPHASE processing, extending the well-regarded ART 712-A MK5’s simple, subwoofer-paired design to a 15-inch woofer for deeper reach.

What to weigh before buying. The measurement is truncated and does not produce a preference score, so its tonal position relies on published engineering rather than a confirmed result. At 27.3kg it is heavier than the ART 945-A alternative. The local low-quality manufacturer data has no computed preference score, making its measured tonal position uncertain. The smaller compression-driver assembly offers less vocal headroom than the ART 735-A MK5.

Buy the RCF NX 945-A when its stated coverage, output, processing, and deployment format best match the job.

Buy the RCF ART 715-A MK5 when its stated strengths are the better match for the room and the rest of the PA.

RCF NX 945-A vs RCF ART 715-A MK5

Specifications Side By Side

RCF NX 945-A RCF ART 715-A MK5
Price$2,299.00$699.00
Ranked#5 of 29 in 15-Inch Two-Way Powered PA Speakers#16 of 29 in 15-Inch Two-Way Powered PA Speakers
ConfigurationActive 2-way bass-reflex PA speakerActive 2-way bass-reflex PA speaker
Drivers15" woofer, compression driver15" woofer, 1" compression driver
Frequency Response45Hz - 20kHz (manufacturer specified)45Hz - 20kHz (manufacturer specified)
Dimensions27.8"H x 16.5"W x 17.8"D (705 x 420 x 451 mm)27.9"H x 17.2"W x 15.3"D (708 x 437 x 389 mm)
Coverage100° x 70°90° x 60°
Maximum SPL135dB peak (manufacturer specified)130dB peak (manufacturer specified)
InputsXLR/TRS combo input and XLR outputXLR and 1/4-inch jack input; XLR output
Amplifier Power2100W peak (1400W LF + 700W HF)1400W peak (1000W LF + 400W HF)
Crossover Frequency650Hz1600Hz
Cabinet MaterialPlywoodPP composite
RiggingM10 and quick-lock rigging; 35mm pole mount2 x M10 inserts; 35mm pole mount
Bass Extension (-3dB)65Hz (measured, vendor Spinorama data)65Hz (measured, vendor Spinorama data)
DSPYes, FiRPHASE and Bass Motion ControlYes, FiRPHASE, EQ, limiting and protection
BluetoothNoNo
Weight60.2 lbs / 27.3 kg43.2 lbs / 19.6 kg

A few more comparisons worth a look in the same class:

Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

RCF NX 945-A: $2,299.00 Amazon B&H Photo Video Guitar Center eBay

RCF NX 945-A ranking card

Pros: The top NX-series 15-inch box pairs a plywood cabinet with a 135dB claimed peak, the highest in the NX range, and a wide 100° x 70° pattern. RCF’s FiRPHASE and Bass Motion Control processing carry over from the smaller NX models.

Cons: The measurement is truncated and does not produce a preference score, so its tonal position relies on published engineering rather than a confirmed result. At 27.3kg it is heavier than the ART 945-A alternative.

Amplifier Power2100W peak (1400W LF + 700W HF)
Bass Extension (-3dB)65Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialPlywood
ConfigurationActive 2-way bass-reflex PA speaker
Coverage100° x 70°
Crossover Frequency650Hz
DSPYes, FiRPHASE and Bass Motion Control
Dimensions27.8"H x 16.5"W x 17.8"D (705 x 420 x 451 mm)
Drivers15" woofer, compression driver
Frequency Response45Hz - 20kHz (manufacturer specified)
InputsXLR/TRS combo input and XLR output
Maximum SPL135dB peak (manufacturer specified)
RiggingM10 and quick-lock rigging; 35mm pole mount
Weight60.2 lbs / 27.3 kg

RCF ART 715-A MK5: $699.00 Amazon B&H Photo Video Guitar Center eBay

RCF ART 715-A MK5 ranking card

Pros: A compact, affordable RCF with 130dB claimed output and FiRPHASE processing, extending the well-regarded ART 712-A MK5’s simple, subwoofer-paired design to a 15-inch woofer for deeper reach.

Cons: The local low-quality manufacturer data has no computed preference score, making its measured tonal position uncertain. The smaller compression-driver assembly offers less vocal headroom than the ART 735-A MK5.

Amplifier Power1400W peak (1000W LF + 400W HF)
Bass Extension (-3dB)65Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialPP composite
ConfigurationActive 2-way bass-reflex PA speaker
Coverage90° x 60°
Crossover Frequency1600Hz
DSPYes, FiRPHASE, EQ, limiting and protection
Dimensions27.9"H x 17.2"W x 15.3"D (708 x 437 x 389 mm)
Drivers15" woofer, 1" compression driver
Frequency Response45Hz - 20kHz (manufacturer specified)
InputsXLR and 1/4-inch jack input; XLR output
Maximum SPL130dB peak (manufacturer specified)
Rigging2 x M10 inserts; 35mm pole mount
Weight43.2 lbs / 19.6 kg