RCF NX 945-A vs RCF ART 715-A MK4

Last updated: September 7, 2026

Short answer: these RCF NX 945-A and RCF ART 715-A MK4 alternatives share a brand and size class, but their coverage, driver architecture, cabinet format, processing, and output priorities can make them fit very different jobs.

Why choose the RCF NX 945-A. The top NX-series 15-inch box pairs a plywood cabinet with a 135dB claimed peak, the highest in the NX range, and a wide 100° x 70° pattern. RCF’s FiRPHASE and Bass Motion Control processing carry over from the smaller NX models.

Why choose the RCF ART 715-A MK4. The 19.6kg cabinet combines 130dB claimed peak output, a broad horn and RCF’s FiRPHASE processing in a straightforward, affordable package for a 15-inch box.

What to weigh before buying. The measurement is truncated and does not produce a preference score, so its tonal position relies on published engineering rather than a confirmed result. At 27.3kg it is heavier than the ART 945-A alternative. The low-quality vendor measurement is truncated and cannot produce a reliable preference score.

Buy the RCF NX 945-A when its stated coverage, output, processing, and deployment format best match the job.

Buy the RCF ART 715-A MK4 when its stated strengths are the better match for the room and the rest of the PA.

If sound quality matters at all to you, skip the RCF ART 715-A MK4. It ranks near the bottom of the 29 15-inch two-way powered pa speakers, so look higher up the list instead.

RCF NX 945-A vs RCF ART 715-A MK4

Specifications Side By Side

RCF NX 945-A RCF ART 715-A MK4
Price$2,299.00$500.00
Ranked#5 of 29 in 15-Inch Two-Way Powered PA Speakers#27 of 29 in 15-Inch Two-Way Powered PA Speakers
ConfigurationActive 2-way bass-reflex PA speakerActive 2-way bass-reflex PA speaker
Drivers15" woofer, compression driver15" woofer, 1" compression driver
Frequency Response45Hz - 20kHz (manufacturer specified)45Hz - 20kHz (manufacturer specified)
Dimensions27.8"H x 16.5"W x 17.8"D (705 x 420 x 451 mm)27.9"H x 17.2"W x 15.3"D (708 x 437 x 389 mm)
Coverage100° x 70°100° x 60°
Maximum SPL135dB peak (manufacturer specified)130dB peak (manufacturer specified)
InputsXLR/TRS combo input and XLR outputXLR/jack combo input; XLR output
Amplifier Power2100W peak (1400W LF + 700W HF)1,400W peak / 700W RMS (1,000W LF + 400W HF peak, manufacturer specified)
Crossover Frequency650Hz1.6kHz (manufacturer specified)
Cabinet MaterialPlywoodPolypropylene composite
RiggingM10 and quick-lock rigging; 35mm pole mountTwo M10 fly points; 35mm pole socket
Bass Extension (-3dB)65Hz (measured, vendor Spinorama data)65Hz (measured, vendor Spinorama data)
DSPYes, FiRPHASE and Bass Motion ControlYes, FiRPHASE, EQ, limiting and protection
BluetoothNoNo
Weight60.2 lbs / 27.3 kg43.2 lbs / 19.6 kg

Other pairings from the same speaker class worth checking:

Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

RCF NX 945-A: $2,299.00 Amazon B&H Photo Video Guitar Center eBay

RCF NX 945-A ranking card

Pros: The top NX-series 15-inch box pairs a plywood cabinet with a 135dB claimed peak, the highest in the NX range, and a wide 100° x 70° pattern. RCF’s FiRPHASE and Bass Motion Control processing carry over from the smaller NX models.

Cons: The measurement is truncated and does not produce a preference score, so its tonal position relies on published engineering rather than a confirmed result. At 27.3kg it is heavier than the ART 945-A alternative.

Amplifier Power2100W peak (1400W LF + 700W HF)
Bass Extension (-3dB)65Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialPlywood
ConfigurationActive 2-way bass-reflex PA speaker
Coverage100° x 70°
Crossover Frequency650Hz
DSPYes, FiRPHASE and Bass Motion Control
Dimensions27.8"H x 16.5"W x 17.8"D (705 x 420 x 451 mm)
Drivers15" woofer, compression driver
Frequency Response45Hz - 20kHz (manufacturer specified)
InputsXLR/TRS combo input and XLR output
Maximum SPL135dB peak (manufacturer specified)
RiggingM10 and quick-lock rigging; 35mm pole mount
Weight60.2 lbs / 27.3 kg

RCF ART 715-A MK4: $500.00 B&H Photo Video Guitar Center eBay

RCF ART 715-A MK4 ranking card

Pros: The 19.6kg cabinet combines 130dB claimed peak output, a broad horn and RCF’s FiRPHASE processing in a straightforward, affordable package for a 15-inch box.

Cons: The low-quality vendor measurement is truncated and cannot produce a reliable preference score. This discontinued MK4 offers little reason to choose it over the newer ART 715-A MK5 unless the used price is substantially lower.

Amplifier Power1,400W peak / 700W RMS (1,000W LF + 400W HF peak, manufacturer specified)
Bass Extension (-3dB)65Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialPolypropylene composite
ConfigurationActive 2-way bass-reflex PA speaker
Coverage100° x 60°
Crossover Frequency1.6kHz (manufacturer specified)
DSPYes, FiRPHASE, EQ, limiting and protection
Dimensions27.9"H x 17.2"W x 15.3"D (708 x 437 x 389 mm)
Drivers15" woofer, 1" compression driver
Frequency Response45Hz - 20kHz (manufacturer specified)
InputsXLR/jack combo input; XLR output
Maximum SPL130dB peak (manufacturer specified)
RiggingTwo M10 fly points; 35mm pole socket
Weight43.2 lbs / 19.6 kg