Short answer: these RCF NX 932-A and RCF ART 732-A MK4 alternatives share a brand and size class, but their coverage, driver architecture, cabinet format, processing, and output priorities can make them fit very different jobs.
Why choose the RCF NX 932-A. A 3-inch titanium compression-driver diaphragm, 100° x 70° coverage and plywood cabinet make it especially capable for clear vocals over wide areas. The 2100W amplifier, advanced RCF processing and 132dB peak claim support serious main-speaker use.
Why choose the RCF ART 732-A MK4. Its large 3-inch compression-driver voice coil, 131dB claimed peak and roughly 53Hz measured extension give it useful vocal headroom and more bass reach than the 712 MK4. The 17.8kg enclosure remains easy to carry.
What to weigh before buying. The medium-quality Spinorama measurement is truncated and cannot generate a preference score, so its high position relies partly on response/directivity curves and published engineering. At 22.9kg it is significantly heavier than the ART 932-A. The low-quality vendor data is truncated and does not yield a preference score. It is discontinued, lacks modern remote control and is eclipsed by the better-supported ART 732-A MK5 and current 9-series models.
Buy the RCF NX 932-A when its stated coverage, output, processing, and deployment format best match the job.
Buy the RCF ART 732-A MK4 when its stated strengths are the better match for the room and the rest of the PA.
The RCF ART 732-A MK4 is not a sound-quality pick. It sits near the bottom of the 37 12-inch two-way powered pa speakers; there are better options higher up.
Specifications Side By Side
| RCF NX 932-A | RCF ART 732-A MK4 | |
|---|---|---|
| Price | $1,999.00 | $1,049.00 |
| Ranked | #8 of 37 in 12-Inch Two-Way Powered PA Speakers | #34 of 37 in 12-Inch Two-Way Powered PA Speakers |
| Configuration | Active 2-way bass-reflex PA speaker | Active 2-way bass-reflex PA speaker |
| Drivers | 12" woofer, 1.4" exit/3" diaphragm compression driver | 12" woofer, 1.4" compression driver with 3" voice coil |
| Frequency Response | 45Hz - 20kHz (manufacturer specified) | 50Hz - 20kHz (manufacturer specified) |
| Dimensions | 24.4"H x 14.3"W x 15.9"D (620 x 362 x 405 mm) | 25.1"H x 15.2"W x 14.3"D (637 x 387 x 363 mm) |
| Bass Extension (-3dB) | 61.5Hz (measured, vendor Spinorama data) | 53Hz (measured, vendor Spinorama data) |
| Coverage | 100° x 70° | 90° x 60° |
| Maximum SPL | 132dB peak (manufacturer specified) | 131dB peak (manufacturer specified) |
| Inputs | XLR/TRS combo input and XLR output | XLR/TRS combo input and XLR link |
| Amplifier Power | 2100W peak (1400W LF + 700W HF) | 1,400W peak / 700W RMS (1,000W LF + 400W HF peak, manufacturer specified) |
| Crossover Frequency | 700Hz | 700Hz (manufacturer specified) |
| Cabinet Material | Plywood | Polypropylene composite |
| Rigging | 6 x M10 inserts, 4 quick-lock points; 35mm pole mount | Two M10 fly points; pole mount |
| DSP | Yes, FiRPHASE and Bass Motion Control | Yes, FiRPHASE, EQ, limiting and protection |
| Bluetooth | No | No |
| Weight | 50.5 lbs / 22.9 kg | 39.2 lbs / 17.8 kg |
Related Speaker Comparisons
A few more comparisons worth a look in the same class:
- RCF ART 932-A vs RCF NX 912-A
- RCF ART 912-A vs HK Audio LINEAR 9 112 XA
- RCF ART 712-A MK4 vs Audiofocus VENU 12a
- RCF NX 932-A vs Yamaha DXR12mkIII
- JBL PRX912 vs RCF NX 932-A
Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
RCF NX 932-A: $1,999.00 Amazon B&H Photo Video Guitar Center eBay
Pros: A 3-inch titanium compression-driver diaphragm, 100° x 70° coverage and plywood cabinet make it especially capable for clear vocals over wide areas. The 2100W amplifier, advanced RCF processing and 132dB peak claim support serious main-speaker use.
Cons: The medium-quality Spinorama measurement is truncated and cannot generate a preference score, so its high position relies partly on response/directivity curves and published engineering. At 22.9kg it is significantly heavier than the ART 932-A.
Full RCF NX 932-A review and specifications →
| Amplifier Power | 2100W peak (1400W LF + 700W HF) |
|---|---|
| Bass Extension (-3dB) | 61.5Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Plywood |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 100° x 70° |
| Crossover Frequency | 700Hz |
| DSP | Yes, FiRPHASE and Bass Motion Control |
| Dimensions | 24.4"H x 14.3"W x 15.9"D (620 x 362 x 405 mm) |
| Drivers | 12" woofer, 1.4" exit/3" diaphragm compression driver |
| Frequency Response | 45Hz - 20kHz (manufacturer specified) |
| Inputs | XLR/TRS combo input and XLR output |
| Maximum SPL | 132dB peak (manufacturer specified) |
| Rigging | 6 x M10 inserts, 4 quick-lock points; 35mm pole mount |
| Weight | 50.5 lbs / 22.9 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
RCF ART 732-A MK4: $1,049.00 B&H Photo Video Guitar Center eBay
Pros: Its large 3-inch compression-driver voice coil, 131dB claimed peak and roughly 53Hz measured extension give it useful vocal headroom and more bass reach than the 712 MK4. The 17.8kg enclosure remains easy to carry.
Cons: The low-quality vendor data is truncated and does not yield a preference score. It is discontinued, lacks modern remote control and is eclipsed by the better-supported ART 732-A MK5 and current 9-series models.
Full RCF ART 732-A MK4 review and specifications →
| Amplifier Power | 1,400W peak / 700W RMS (1,000W LF + 400W HF peak, manufacturer specified) |
|---|---|
| Bass Extension (-3dB) | 53Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Polypropylene composite |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 90° x 60° |
| Crossover Frequency | 700Hz (manufacturer specified) |
| DSP | Yes, FiRPHASE, EQ, limiting and protection |
| Dimensions | 25.1"H x 15.2"W x 14.3"D (637 x 387 x 363 mm) |
| Drivers | 12" woofer, 1.4" compression driver with 3" voice coil |
| Frequency Response | 50Hz - 20kHz (manufacturer specified) |
| Inputs | XLR/TRS combo input and XLR link |
| Maximum SPL | 131dB peak (manufacturer specified) |
| Rigging | Two M10 fly points; pole mount |
| Weight | 39.2 lbs / 17.8 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- RCF ART 732-A MK4 vs Amate Audio X12CLA
- RCF ART 732-A MK4 vs RCF ART 712-A MK4
- RCF ART 732-A MK4 vs Electro-Voice MFX-12MC
- RCF ART 732-A MK4 vs Audiofocus VENU 12a
- RCF ART 732-A MK4 vs RCF HD 12-A MK5
- RCF ART 732-A MK4 vs RCF ART 712-A MK5
- RCF ART 732-A MK4 vs Yamaha DBR12
- RCF ART 732-A MK4 vs RCF NX 912-A
- See all 20 comparisons


