Short answer: choose between the RCF ART 932-A and Yamaha DXR12mkIII for the deployment, not from the automatic ranking alone. Their driver format, power requirements, coverage, bass reach, output capability, and control features determine which is the more practical PA for a particular room or system.
The case for the RCF ART 932-A. A large 3-inch compression-driver voice coil, broad 100° x 60° coverage and 132dB claimed maximum output make it attractive for clear vocals and live mains. RCF’s FiRPHASE and Bass Motion Control processing target phase consistency and useful low-frequency headroom.
The case for the Yamaha DXR12mkIII. The third-generation DXR raises claimed output to 134dB and adds 2000W amplification, app-based control and more capable onboard DSP while staying light at 38.4 lbs (17.4 kg). Medium-quality vendor data shows measured extension around 60Hz.
Important trade-offs. The local low-quality vendor data does not currently produce a preference score, so this position has lower measurement confidence than the QSC, JBL and scored FBT models. Its streamlined controls lack the app and deep user DSP of the JBL PRX912. The truncated Spinorama data does not produce a preference score, so its tonal advantage over the proven DXR12mkII is not yet quantified. Wireless connectivity is for remote control, not a substitute for a wired production-audio input.
Buy the RCF ART 932-A when its stated format, coverage, and system features fit the job better.
Buy the Yamaha DXR12mkIII when its stated output, control, and deployment strengths better match the system.
Want more options? Browse the full PA & Live Sound rankings.
A loud, wide covering 12 inch powered PA speaker with a large compression driver for clear vocals and live mains.
A light, loud 12 inch powered PA speaker with strong amplification, app control and capable onboard DSP.
Prices on this page were last checked October 23, 2026 at 8:27 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
Specifications Side By Side
| RCF ART 932-A | Yamaha DXR12mkIII | |
|---|---|---|
| Price | $1,399.00 | $999.99 |
| Ranked | #9 of 83 in 12-Inch PA Speakers | #13 of 83 in 12-Inch PA Speakers |
| Bass Extension (-3dB) | 54.5Hz (measured, vendor Spinorama data) | 60Hz (measured, vendor Spinorama data) |
| Passive | No | No |
| Configuration | Active 2-way bass-reflex PA speaker | Active 2-way bass-reflex PA speaker |
| Drivers | 12” woofer, 1.4” compression driver with 3” voice coil | 12” woofer, 1” throat/1.75” diaphragm compression driver |
| Frequency Response | 50Hz - 20kHz (manufacturer specified) | 50Hz - 20kHz (-10dB, manufacturer specified) |
| Dimensions | 25.3”H x 14.6”W x 14.3”D (642 x 370 x 363 mm) | 23.6”H x 14.4”W x 13.8”D (600 x 366 x 350 mm) |
| Coverage | 100° x 60° | 90° x 60° |
| Maximum SPL | 132dB peak (manufacturer specified) | 134dB peak (manufacturer specified) |
| Inputs | XLR/TRS combo | Balanced mic/line inputs and link output |
| Amplifier Power | 2100W peak (1500W LF + 600W HF) | 2000W peak / 1000W RMS (1700W LF + 300W HF peak) |
| Crossover Frequency | 700Hz | 1800Hz (FIR-X) |
| Cabinet Material | PP composite | PP plastic |
| Rigging | M10 inserts; 35mm pole mount | 3 x M10 points plus U-bracket points; 35mm dual-angle pole mount |
| DSP | Yes | Yes, FIR-X tuning, Drive Motion Calibration and D-Remote |
| Bluetooth | No | Yes |
| Weight | 41.4 lbs (18.8 kg) | 38.4 lbs (17.4 kg) |
| XLR Input | Yes | No |
| RCA Input | No | No |
| TRS Input | Yes | No |
| Optical Input | No | No |
| Coaxial Input | No | No |
| USB Input | No | No |
| HDMI Input | No | No |
| AES Input | No | No |
| Aux Input | No | No |
| Microphone Input | No | Yes |
| Guitar Input | No | No |
| Bluetooth Version | - | 5.0 |
Frequency Response Compared
Both speakers’ spinorama measurements, overlaid. A flatter line is more neutral: peaks sound forward or harsh, dips sound recessed. Each curve is shifted so its average from 300 Hz to 3 kHz sits at 0 dB, so loudness differences between the two are removed and only the shape is compared.
Measurement data: RCF ART 932-A (measured by the manufacturer) and Yamaha DXR12mkIII (measured by the manufacturer), via spinorama.org.
Related Speaker Comparisons
More worthwhile head-to-heads for RCF ART 932-A: