Short answer: choose between the RCF ART 932-A and RCF ART 912-A for the deployment, not from the automatic ranking alone. Their driver format, power requirements, coverage, bass reach, output capability, and control features determine which is the more practical PA for a particular room or system.
The case for the RCF ART 932-A. A large 3-inch compression-driver voice coil, broad 100° x 60° coverage and 132dB claimed maximum output make it attractive for clear vocals and live mains. RCF’s FiRPHASE and Bass Motion Control processing target phase consistency and useful low-frequency headroom.
The case for the RCF ART 912-A. A current, widely stocked 12-inch RCF with 130dB claimed output, 100° x 60° coverage and the same FiRPHASE/Bass Motion Control platform used higher in the ART 9 line. It is a straightforward choice for users who value simple setup over menu-heavy DSP.
Important trade-offs. The local low-quality vendor data does not currently produce a preference score, so this position has lower measurement confidence than the QSC, JBL and scored FBT models. Its streamlined controls lack the app and deep user DSP of the JBL PRX912. The available low-quality manufacturer directivity data has no computed preference score, limiting confidence in cross-brand tonal comparisons. It has only basic rear-panel presets and no wireless control or Bluetooth audio.
Buy the RCF ART 932-A when its stated format, coverage, and system features fit the job better.
Buy the RCF ART 912-A when its stated output, control, and deployment strengths better match the system.
Specifications Side By Side
| RCF ART 932-A | RCF ART 912-A | |
|---|---|---|
| Price | $1,399.00 | $949.00 |
| Ranked | #7 of 37 in 12-Inch Two-Way Powered PA Speakers | #9 of 37 in 12-Inch Two-Way Powered PA Speakers |
| Configuration | Active 2-way bass-reflex PA speaker | Active 2-way bass-reflex PA speaker |
| Drivers | 12" woofer, 1.4" compression driver with 3" voice coil | 12" woofer, 1" compression driver with 1.75" voice coil |
| Frequency Response | 50Hz - 20kHz (manufacturer specified) | 50Hz - 20kHz (manufacturer specified) |
| Dimensions | 25.3"H x 14.6"W x 14.3"D (642 x 370 x 363 mm) | 25.3"H x 14.6"W x 14.3"D (642 x 370 x 363 mm) |
| Coverage | 100° x 60° | 100° x 60° |
| Maximum SPL | 132dB peak (manufacturer specified) | 130dB peak (manufacturer specified) |
| Inputs | XLR/TRS combo | XLR/TRS combo |
| Amplifier Power | 2100W peak (1500W LF + 600W HF) | 2,100W peak (1,400W LF + 700W HF, manufacturer specified) |
| Crossover Frequency | 700Hz | 1.7kHz (manufacturer specified) |
| Cabinet Material | PP composite | Polypropylene composite |
| Rigging | M10 inserts; 35mm pole mount | M10 fly points; pole mount |
| DSP | Yes | Yes |
| Bluetooth | No | No |
| Weight | 41.4 lbs / 18.8 kg | 41.9 lbs / 19 kg |
Related Speaker Comparisons
A few more comparisons worth a look in the same class:
- RCF NX 932-A vs Yamaha DXR12mkIII
- Yamaha DXR12mkIII vs HK Audio LINEAR 7 112 XA
- RCF NX 932-A vs HK Audio LINEAR 7 112 XA
- RCF ART 932-A vs Yamaha DXR12mkIII
- RCF ART 912-A vs HK Audio LINEAR 9 112 XA
Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
RCF ART 932-A: $1,399.00 Amazon B&H Photo Video Guitar Center eBay
Pros: A large 3-inch compression-driver voice coil, broad 100° x 60° coverage and 132dB claimed maximum output make it attractive for clear vocals and live mains. RCF’s FiRPHASE and Bass Motion Control processing target phase consistency and useful low-frequency headroom.
Cons: The local low-quality vendor data does not currently produce a preference score, so this position has lower measurement confidence than the QSC, JBL and scored FBT models. Its streamlined controls lack the app and deep user DSP of the JBL PRX912.
Full RCF ART 932-A review and specifications →
| Amplifier Power | 2100W peak (1500W LF + 600W HF) |
|---|---|
| Bluetooth | No |
| Cabinet Material | PP composite |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 100° x 60° |
| Crossover Frequency | 700Hz |
| DSP | Yes |
| Dimensions | 25.3"H x 14.6"W x 14.3"D (642 x 370 x 363 mm) |
| Drivers | 12" woofer, 1.4" compression driver with 3" voice coil |
| Frequency Response | 50Hz - 20kHz (manufacturer specified) |
| Inputs | XLR/TRS combo |
| Maximum SPL | 132dB peak (manufacturer specified) |
| Rigging | M10 inserts; 35mm pole mount |
| Weight | 41.4 lbs / 18.8 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
RCF ART 912-A: $949.00 Amazon B&H Photo Video Guitar Center eBay
Pros: A current, widely stocked 12-inch RCF with 130dB claimed output, 100° x 60° coverage and the same FiRPHASE/Bass Motion Control platform used higher in the ART 9 line. It is a straightforward choice for users who value simple setup over menu-heavy DSP.
Cons: The available low-quality manufacturer directivity data has no computed preference score, limiting confidence in cross-brand tonal comparisons. It has only basic rear-panel presets and no wireless control or Bluetooth audio.
Full RCF ART 912-A review and specifications →
| Amplifier Power | 2,100W peak (1,400W LF + 700W HF, manufacturer specified) |
|---|---|
| Bluetooth | No |
| Cabinet Material | Polypropylene composite |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 100° x 60° |
| Crossover Frequency | 1.7kHz (manufacturer specified) |
| DSP | Yes |
| Dimensions | 25.3"H x 14.6"W x 14.3"D (642 x 370 x 363 mm) |
| Drivers | 12" woofer, 1" compression driver with 1.75" voice coil |
| Frequency Response | 50Hz - 20kHz (manufacturer specified) |
| Inputs | XLR/TRS combo |
| Maximum SPL | 130dB peak (manufacturer specified) |
| Rigging | M10 fly points; pole mount |
| Weight | 41.9 lbs / 19 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons