RCF ART 912-A vs Yamaha DXR12mkII

Last updated: September 7, 2026

Short answer: choose between the RCF ART 912-A and Yamaha DXR12mkII for the requirements of the venue and system, not from rank alone. In this size class, coverage, bass extension, output capability, DSP, cabinet construction, and service support often decide the better fit.

Why choose the RCF ART 912-A. A current, widely stocked 12-inch RCF with 130dB claimed output, 100° x 60° coverage and the same FiRPHASE/Bass Motion Control platform used higher in the ART 9 line. It is a straightforward choice for users who value simple setup over menu-heavy DSP.

Why choose the Yamaha DXR12mkII. A proven, broadly distributed workhorse with a flexible three-channel input section and 134dB claimed maximum output. Medium-quality vendor Spinorama data and 61Hz measured extension provide more evidence than many PA competitors, while Yamaha’s FIR-X processing and D-CONTOUR presets simplify setup.

What to weigh before buying. The available low-quality manufacturer directivity data has no computed preference score, limiting confidence in cross-brand tonal comparisons. It has only basic rear-panel presets and no wireless control or Bluetooth audio. The 4.66 ideal-subwoofer preference score is only mid-pack, with meaningful response/directivity irregularity in the supplied data. It lacks app control and Bluetooth audio, and newer competitors offer more user-adjustable DSP.

Buy the RCF ART 912-A when its stated coverage, output, processing, and deployment format best match the job.

Buy the Yamaha DXR12mkII when its stated strengths are the better match for the room and the rest of the PA.

RCF ART 912-A vs Yamaha DXR12mkII

Specifications Side By Side

RCF ART 912-A Yamaha DXR12mkII
Price$949.00$909.99
Ranked#9 of 37 in 12-Inch Two-Way Powered PA Speakers#13 of 37 in 12-Inch Two-Way Powered PA Speakers
ConfigurationActive 2-way bass-reflex PA speakerActive 2-way bass-reflex PA speaker
Drivers12" woofer, 1" compression driver with 1.75" voice coil12" woofer, 1.75" compression driver
Frequency Response50Hz - 20kHz (manufacturer specified)52Hz - 20kHz (manufacturer specified)
Dimensions25.3"H x 14.6"W x 14.3"D (642 x 370 x 363 mm)23.7"H x 14.3"W x 13.8"D (601 x 362 x 350 mm)
Amplifier Power2,100W peak (1,400W LF + 700W HF, manufacturer specified)1100W dynamic / 700W continuous (950W LF + 150W HF dynamic)
Crossover Frequency1.7kHz (manufacturer specified)-
Cabinet MaterialPolypropylene compositeMatte-finish ABS
RiggingM10 fly points; pole mount3 x M10 points; 35mm dual-angle pole mount
Coverage100° x 60°90° x 60°
Maximum SPL130dB peak (manufacturer specified)134dB peak (manufacturer specified)
InputsXLR/TRS combo2 x XLR/TRS combo, stereo RCA
DSPYesYes
BluetoothNoNo
Weight41.9 lbs / 19 kg41 lbs / 18.6 kg
Bass Extension (-3dB)-61Hz (measured, vendor Spinorama data)

A few more comparisons worth a look in the same class:

Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

RCF ART 912-A: $949.00 Amazon B&H Photo Video Guitar Center eBay

RCF ART 912-A ranking card

Pros: A current, widely stocked 12-inch RCF with 130dB claimed output, 100° x 60° coverage and the same FiRPHASE/Bass Motion Control platform used higher in the ART 9 line. It is a straightforward choice for users who value simple setup over menu-heavy DSP.

Cons: The available low-quality manufacturer directivity data has no computed preference score, limiting confidence in cross-brand tonal comparisons. It has only basic rear-panel presets and no wireless control or Bluetooth audio.

Amplifier Power2,100W peak (1,400W LF + 700W HF, manufacturer specified)
BluetoothNo
Cabinet MaterialPolypropylene composite
ConfigurationActive 2-way bass-reflex PA speaker
Coverage100° x 60°
Crossover Frequency1.7kHz (manufacturer specified)
DSPYes
Dimensions25.3"H x 14.6"W x 14.3"D (642 x 370 x 363 mm)
Drivers12" woofer, 1" compression driver with 1.75" voice coil
Frequency Response50Hz - 20kHz (manufacturer specified)
InputsXLR/TRS combo
Maximum SPL130dB peak (manufacturer specified)
RiggingM10 fly points; pole mount
Weight41.9 lbs / 19 kg

Yamaha DXR12mkII: $909.99 Amazon B&H Photo Video Guitar Center eBay

Yamaha DXR12mkII ranking card

Pros: A proven, broadly distributed workhorse with a flexible three-channel input section and 134dB claimed maximum output. Medium-quality vendor Spinorama data and 61Hz measured extension provide more evidence than many PA competitors, while Yamaha’s FIR-X processing and D-CONTOUR presets simplify setup.

Cons: The 4.66 ideal-subwoofer preference score is only mid-pack, with meaningful response/directivity irregularity in the supplied data. It lacks app control and Bluetooth audio, and newer competitors offer more user-adjustable DSP.

Amplifier Power1100W dynamic / 700W continuous (950W LF + 150W HF dynamic)
Bass Extension (-3dB)61Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialMatte-finish ABS
ConfigurationActive 2-way bass-reflex PA speaker
Coverage90° x 60°
DSPYes
Dimensions23.7"H x 14.3"W x 13.8"D (601 x 362 x 350 mm)
Drivers12" woofer, 1.75" compression driver
Frequency Response52Hz - 20kHz (manufacturer specified)
Inputs2 x XLR/TRS combo, stereo RCA
Maximum SPL134dB peak (manufacturer specified)
Rigging3 x M10 points; 35mm dual-angle pole mount
Weight41 lbs / 18.6 kg