Short answer: these RCF ART 912-A and RCF ART 732-A MK4 alternatives share a brand and size class, but their coverage, driver architecture, cabinet format, processing, and output priorities can make them fit very different jobs.
Why choose the RCF ART 912-A. A current, widely stocked 12-inch RCF with 130dB claimed output, 100° x 60° coverage and the same FiRPHASE/Bass Motion Control platform used higher in the ART 9 line. It is a straightforward choice for users who value simple setup over menu-heavy DSP.
Why choose the RCF ART 732-A MK4. Its large 3-inch compression-driver voice coil, 131dB claimed peak and roughly 53Hz measured extension give it useful vocal headroom and more bass reach than the 712 MK4. The 17.8kg enclosure remains easy to carry.
What to weigh before buying. The available low-quality manufacturer directivity data has no computed preference score, limiting confidence in cross-brand tonal comparisons. It has only basic rear-panel presets and no wireless control or Bluetooth audio. The low-quality vendor data is truncated and does not yield a preference score. It is discontinued, lacks modern remote control and is eclipsed by the better-supported ART 732-A MK5 and current 9-series models.
Buy the RCF ART 912-A when its stated coverage, output, processing, and deployment format best match the job.
Buy the RCF ART 732-A MK4 when its stated strengths are the better match for the room and the rest of the PA.
If sound quality matters at all to you, skip the RCF ART 732-A MK4. It ranks near the bottom of the 37 12-inch two-way powered pa speakers, so look higher up the list instead.
Specifications Side By Side
| RCF ART 912-A | RCF ART 732-A MK4 | |
|---|---|---|
| Price | $949.00 | $1,049.00 |
| Ranked | #9 of 37 in 12-Inch Two-Way Powered PA Speakers | #34 of 37 in 12-Inch Two-Way Powered PA Speakers |
| Configuration | Active 2-way bass-reflex PA speaker | Active 2-way bass-reflex PA speaker |
| Drivers | 12" woofer, 1" compression driver with 1.75" voice coil | 12" woofer, 1.4" compression driver with 3" voice coil |
| Frequency Response | 50Hz - 20kHz (manufacturer specified) | 50Hz - 20kHz (manufacturer specified) |
| Dimensions | 25.3"H x 14.6"W x 14.3"D (642 x 370 x 363 mm) | 25.1"H x 15.2"W x 14.3"D (637 x 387 x 363 mm) |
| Amplifier Power | 2,100W peak (1,400W LF + 700W HF, manufacturer specified) | 1,400W peak / 700W RMS (1,000W LF + 400W HF peak, manufacturer specified) |
| Crossover Frequency | 1.7kHz (manufacturer specified) | 700Hz (manufacturer specified) |
| Cabinet Material | Polypropylene composite | Polypropylene composite |
| Rigging | M10 fly points; pole mount | Two M10 fly points; pole mount |
| Coverage | 100° x 60° | 90° x 60° |
| Maximum SPL | 130dB peak (manufacturer specified) | 131dB peak (manufacturer specified) |
| Inputs | XLR/TRS combo | XLR/TRS combo input and XLR link |
| DSP | Yes | Yes, FiRPHASE, EQ, limiting and protection |
| Bluetooth | No | No |
| Weight | 41.9 lbs / 19 kg | 39.2 lbs / 17.8 kg |
| Bass Extension (-3dB) | - | 53Hz (measured, vendor Spinorama data) |
Related Speaker Comparisons
A few more comparisons worth a look in the same class:
- JBL PRX912 vs Yamaha DXR12mkIII
- RCF NX 912-A vs RCF ART 712-A MK4
- Yamaha DXR12mkIII vs Yamaha DXR12mkII
- Yamaha DXR12mkII vs RCF ART 732-A MK4
- JBL PRX912 vs RCF ART 732-A MK4
Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
RCF ART 912-A: $949.00 Amazon B&H Photo Video Guitar Center eBay
Pros: A current, widely stocked 12-inch RCF with 130dB claimed output, 100° x 60° coverage and the same FiRPHASE/Bass Motion Control platform used higher in the ART 9 line. It is a straightforward choice for users who value simple setup over menu-heavy DSP.
Cons: The available low-quality manufacturer directivity data has no computed preference score, limiting confidence in cross-brand tonal comparisons. It has only basic rear-panel presets and no wireless control or Bluetooth audio.
Full RCF ART 912-A review and specifications →
| Amplifier Power | 2,100W peak (1,400W LF + 700W HF, manufacturer specified) |
|---|---|
| Bluetooth | No |
| Cabinet Material | Polypropylene composite |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 100° x 60° |
| Crossover Frequency | 1.7kHz (manufacturer specified) |
| DSP | Yes |
| Dimensions | 25.3"H x 14.6"W x 14.3"D (642 x 370 x 363 mm) |
| Drivers | 12" woofer, 1" compression driver with 1.75" voice coil |
| Frequency Response | 50Hz - 20kHz (manufacturer specified) |
| Inputs | XLR/TRS combo |
| Maximum SPL | 130dB peak (manufacturer specified) |
| Rigging | M10 fly points; pole mount |
| Weight | 41.9 lbs / 19 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
RCF ART 732-A MK4: $1,049.00 B&H Photo Video Guitar Center eBay
Pros: Its large 3-inch compression-driver voice coil, 131dB claimed peak and roughly 53Hz measured extension give it useful vocal headroom and more bass reach than the 712 MK4. The 17.8kg enclosure remains easy to carry.
Cons: The low-quality vendor data is truncated and does not yield a preference score. It is discontinued, lacks modern remote control and is eclipsed by the better-supported ART 732-A MK5 and current 9-series models.
Full RCF ART 732-A MK4 review and specifications →
| Amplifier Power | 1,400W peak / 700W RMS (1,000W LF + 400W HF peak, manufacturer specified) |
|---|---|
| Bass Extension (-3dB) | 53Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Polypropylene composite |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 90° x 60° |
| Crossover Frequency | 700Hz (manufacturer specified) |
| DSP | Yes, FiRPHASE, EQ, limiting and protection |
| Dimensions | 25.1"H x 15.2"W x 14.3"D (637 x 387 x 363 mm) |
| Drivers | 12" woofer, 1.4" compression driver with 3" voice coil |
| Frequency Response | 50Hz - 20kHz (manufacturer specified) |
| Inputs | XLR/TRS combo input and XLR link |
| Maximum SPL | 131dB peak (manufacturer specified) |
| Rigging | Two M10 fly points; pole mount |
| Weight | 39.2 lbs / 17.8 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- RCF ART 732-A MK4 vs Amate Audio X12CLA
- RCF ART 732-A MK4 vs RCF ART 712-A MK4
- RCF ART 732-A MK4 vs Electro-Voice MFX-12MC
- RCF ART 732-A MK4 vs Audiofocus VENU 12a
- RCF ART 732-A MK4 vs RCF HD 12-A MK5
- RCF ART 732-A MK4 vs RCF ART 712-A MK5
- RCF ART 732-A MK4 vs Yamaha DBR12
- RCF ART 732-A MK4 vs RCF NX 912-A
- See all 20 comparisons