Short answer: choose between the RCF ART 732-A MK4 and Audiofocus VENU 12a for the deployment, not from the automatic ranking alone. Their driver format, power requirements, coverage, bass reach, output capability, and control features determine which is the more practical PA for a particular room or system.
The case for the RCF ART 732-A MK4. Its large 3-inch compression-driver voice coil, 131dB claimed peak and roughly 53Hz measured extension give it useful vocal headroom and more bass reach than the 712 MK4. The 17.8kg enclosure remains easy to carry.
The case for the Audiofocus VENU 12a. A light 18.5kg plywood cabinet, very broad 110° x 60° coverage and 135dB claimed peak output make it convenient for wide rooms and rental work. Four onboard presets simplify use as a main or monitor.
Important trade-offs. The low-quality vendor data is truncated and does not yield a preference score. It is discontinued, lacks modern remote control and is eclipsed by the better-supported ART 732-A MK5 and current 9-series models. The low-quality vendor Spinorama data is the weakest tonal result in this category: a 0.74 ideal-subwoofer preference score and roughly 102Hz measured bass extension conflict sharply with the claimed 50Hz lower limit. A subwoofer and careful EQ are strongly recommended.
Buy the RCF ART 732-A MK4 when its stated format, coverage, and system features fit the job better.
Buy the Audiofocus VENU 12a when its stated output, control, and deployment strengths better match the system.
Skip both if sound quality is the priority. There are better options higher up the 37 12-inch two-way powered pa speakers.
Specifications Side By Side
| RCF ART 732-A MK4 | Audiofocus VENU 12a | |
|---|---|---|
| Price | $1,049.00 | $2,890.00 |
| Ranked | #34 of 37 in 12-Inch Two-Way Powered PA Speakers | #36 of 37 in 12-Inch Two-Way Powered PA Speakers |
| Configuration | Active 2-way bass-reflex PA speaker | Active 2-way bass-reflex PA speaker |
| Drivers | 12" woofer, 1.4" compression driver with 3" voice coil | 12" woofer, 1" compression driver |
| Frequency Response | 50Hz - 20kHz (manufacturer specified) | 50Hz - 20kHz (-6dB, manufacturer specified) |
| Dimensions | 25.1"H x 15.2"W x 14.3"D (637 x 387 x 363 mm) | 22.3"H x 14.3"W x 14.1"D (566 x 362 x 357 mm) |
| Amplifier Power | 1,400W peak / 700W RMS (1,000W LF + 400W HF peak, manufacturer specified) | Self-powered Class D amplifier; output rating not published by AUDIOFOCUS in the current specification |
| Crossover Frequency | 700Hz (manufacturer specified) | - |
| Cabinet Material | Polypropylene composite | High-grade birch plywood with polyurea coating |
| Rigging | Two M10 fly points; pole mount | Adjustable pole mount and M8 threaded inserts |
| Bass Extension (-3dB) | 53Hz (measured, vendor Spinorama data) | 112Hz (measured, vendor Spinorama data) |
| Coverage | 90° x 60° | 110° x 60° |
| Maximum SPL | 131dB peak (manufacturer specified) | 135dB peak (manufacturer specified) |
| Inputs | XLR/TRS combo input and XLR link | XLR input and link |
| DSP | Yes, FiRPHASE, EQ, limiting and protection | Yes, 4 presets |
| Bluetooth | No | No |
| Weight | 39.2 lbs / 17.8 kg | 40.8 lbs / 18.5 kg |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- PreSonus CDL12 vs Amate Audio X12CLA
- Amate Audio X12CLA vs RCF ART 712-A MK4
- PreSonus ULT12 vs RCF ART 945-A
- Electro-Voice MFX-12MC vs RCF ART 732-A MK4
- RCF ART 712-A MK4 vs Audiofocus VENU 12a
Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
RCF ART 732-A MK4: $1,049.00 B&H Photo Video Guitar Center eBay
Pros: Its large 3-inch compression-driver voice coil, 131dB claimed peak and roughly 53Hz measured extension give it useful vocal headroom and more bass reach than the 712 MK4. The 17.8kg enclosure remains easy to carry.
Cons: The low-quality vendor data is truncated and does not yield a preference score. It is discontinued, lacks modern remote control and is eclipsed by the better-supported ART 732-A MK5 and current 9-series models.
Full RCF ART 732-A MK4 review and specifications →
| Amplifier Power | 1,400W peak / 700W RMS (1,000W LF + 400W HF peak, manufacturer specified) |
|---|---|
| Bass Extension (-3dB) | 53Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Polypropylene composite |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 90° x 60° |
| Crossover Frequency | 700Hz (manufacturer specified) |
| DSP | Yes, FiRPHASE, EQ, limiting and protection |
| Dimensions | 25.1"H x 15.2"W x 14.3"D (637 x 387 x 363 mm) |
| Drivers | 12" woofer, 1.4" compression driver with 3" voice coil |
| Frequency Response | 50Hz - 20kHz (manufacturer specified) |
| Inputs | XLR/TRS combo input and XLR link |
| Maximum SPL | 131dB peak (manufacturer specified) |
| Rigging | Two M10 fly points; pole mount |
| Weight | 39.2 lbs / 17.8 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Audiofocus VENU 12a: $2,890.00 eBay
Pros: A light 18.5kg plywood cabinet, very broad 110° x 60° coverage and 135dB claimed peak output make it convenient for wide rooms and rental work. Four onboard presets simplify use as a main or monitor.
Cons: The low-quality vendor Spinorama data is the weakest tonal result in this category: a 0.74 ideal-subwoofer preference score and roughly 102Hz measured bass extension conflict sharply with the claimed 50Hz lower limit. A subwoofer and careful EQ are strongly recommended.
Full Audiofocus VENU 12a review and specifications →
| Amplifier Power | Self-powered Class D amplifier; output rating not published by AUDIOFOCUS in the current specification |
|---|---|
| Bass Extension (-3dB) | 112Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | High-grade birch plywood with polyurea coating |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 110° x 60° |
| DSP | Yes, 4 presets |
| Dimensions | 22.3"H x 14.3"W x 14.1"D (566 x 362 x 357 mm) |
| Drivers | 12" woofer, 1" compression driver |
| Frequency Response | 50Hz - 20kHz (-6dB, manufacturer specified) |
| Inputs | XLR input and link |
| Maximum SPL | 135dB peak (manufacturer specified) |
| Rigging | Adjustable pole mount and M8 threaded inserts |
| Weight | 40.8 lbs / 18.5 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons