PSB Imagine T65 vs Klipsch Heresy IV

Last updated: September 29, 2026

Short answer: the PSB Imagine T65. It ranks #34 of 73 floorstanding speakers by sound quality, rated 4.3/5, at $2,699; the Klipsch Heresy IV ranks #71, rated 2.3/5, and costs $3,198, so there is not much of a tradeoff to weigh.

PSB Imagine T65 vs Klipsch Heresy IV

What the PSB Imagine T65 does well: Three-way design with dual 6.5” woven carbon fiber woofers delivers genuinely strong, extended low end for a $2699 tower: among the better performers Erin has measured in this price class. The tradeoff: Noticeable dip in the midrange/crossover region that Erin flagged as affecting dialogue and vocal clarity, though he notes a couple bands of EQ smooths it out.

Why pick the Klipsch Heresy IV: Very high 94.5dB/2.83V/1m sensitivity in Erin’s anechoic measurement (well below Klipsch’s 99dB in-room claim, but still excellent) and strong short-term output from a 12-inch woofer plus horn-loaded midrange and tweeter. Watch for: Erin measured a 77Hz F3 and response rolling away near 100Hz in-room, so a subwoofer is required for modern full-range reproduction.

Buy the PSB Imagine T65. It is rated higher for sound quality than the Klipsch Heresy IV and costs less, so it is the default pick unless a specific strength of the other one matters more to you.

Looking for alternatives? See the complete Passive Home rankings.

Specifications Side By Side

PSB Imagine T65 Klipsch Heresy IV
Price$2,699 per pair$3,198 per pair
Ranked#34 of 73 in Large Size Floorstanding Speakers#71 of 73 in Large Size Floorstanding Speakers
Drivers1” titanium dome tweeter, 5.25” woven carbon fiber midrange, 2x 6.5” woven carbon fiber woofers1” horn-loaded tweeter; 1.75” horn-loaded midrange; 12” woofer
Crossover Frequency600Hz & 2000Hz, 4th-order Linkwitz-Riley-
Dimensions38.8” x 8.4” x 13.5” (986 x 213 x 343 mm)24.8”H x 15.6”W x 13.3”D
Weight44.1 lbs (20 kg) each45 lbs (20.4 kg) each
Impedance8 ohms nominal (3.3 ohms minimum measured by Erin’s Audio Corner; manufacturer specifies 4 ohms minimum)Approximately 4 ohms minimum (measured, Erin’s Audio Corner)
Sensitivity85.1dB (measured average, Erin’s Audio Corner)94.5dB/2.83V/1m (measured, Erin’s Audio Corner)
Recommended Power20-200W-
EnclosureVented: dual rear slot ports, individual woofer chambers-
Bass Extension (-3dB)47Hz (measured average, Erin’s Audio Corner)77Hz (measured, Erin’s Audio Corner)
Bass Extension (-10dB)26Hz (measured average, Erin’s Audio Corner)50.0Hz (measured, Erin’s Audio Corner)
Frequency Response28Hz - 20kHz (±1.5dB, manufacturer specified)-
Spinorama Preference Score5.292.27
Spinorama Preference Score with Perfect Sub6.515.02
DIY KitNoNo
Woofer Cabinet-ported, rear

How PSB Imagine T65 compares with other leading options:

Prices on this page were last checked September 29, 2026 at 3:43 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

PSB Imagine T65: $2,699 per pair PSB Speakers eBay

PSB Imagine T65 ranking card

Pros: Three-way design with dual 6.5” woven carbon fiber woofers delivers genuinely strong, extended low end for a $2699 tower: among the better performers Erin has measured in this price class. Distortion shows a clean second-order character with clear separation from third-order all the way up to 96 dB, indicating a well-controlled motor. Compression data shows enhancement rather than compression below about 50-60 Hz, so the bass can sound louder as you turn it up rather than choking off. Wide, forgiving vertical listening window (about ±25°) thanks to the 3-way layout, giving more seating and placement flexibility than most towers. Plenty of dynamic headroom for home theater use or a two-channel system: 100W drove it comfortably in Erin’s room. Measured bass extension of 47Hz (-3dB), with a measured sensitivity of 85.1dB.

Cons: Noticeable dip in the midrange/crossover region that Erin flagged as affecting dialogue and vocal clarity, though he notes a couple bands of EQ smooths it out. Some horizontal dispersion mismatch (about 10-15° of ballooning between 1-3 kHz) between the midrange and tweeter can add extra perceived attack or detail if your room’s sidewalls are reflective. Dips to 4 ohms, so it wants an amplifier comfortable driving a 4-ohm load. Distortion climbs above 3% around 60 Hz at 96 dB, though it’s benign second-order distortion.

Bass Extension (-10dB)26Hz (measured average, Erin’s Audio Corner)
Bass Extension (-3dB)47Hz (measured average, Erin’s Audio Corner)
Crossover Frequency600Hz & 2000Hz, 4th-order Linkwitz-Riley
DIY KitNo
Dimensions38.8” x 8.4” x 13.5” (986 x 213 x 343 mm)
Drivers1” titanium dome tweeter, 5.25” woven carbon fiber midrange, 2x 6.5” woven carbon fiber woofers
EnclosureVented: dual rear slot ports, individual woofer chambers
Frequency Response28Hz - 20kHz (±1.5dB, manufacturer specified)
Impedance8 ohms nominal (3.3 ohms minimum measured by Erin’s Audio Corner; manufacturer specifies 4 ohms minimum)
Recommended Power20-200W
Sensitivity85.1dB (measured average, Erin’s Audio Corner)
Spinorama Preference Score5.29
Spinorama Preference Score with Perfect Sub6.51
Weight44.1 lbs (20 kg) each

Klipsch Heresy IV: $3,198 per pair Amazon Crutchfield eBay

Klipsch Heresy IV ranking card

Pros: Very high 94.5dB/2.83V/1m sensitivity in Erin’s anechoic measurement (well below Klipsch’s 99dB in-room claim, but still excellent) and strong short-term output from a 12-inch woofer plus horn-loaded midrange and tweeter. The compact, furniture-grade Heritage cabinet is easier to place than most high-efficiency designs, and dynamics at moderate levels can sound lively. A stable four-ohm-capable amplifier can produce substantial SPL with relatively little voltage. Measured bass extension of 77Hz (-3dB), with a measured sensitivity of 94.5dB.

Cons: Erin measured a 77Hz F3 and response rolling away near 100Hz in-room, so a subwoofer is required for modern full-range reproduction. The impedance dips to about 4 ohms, reducing the practical amplifier advantage implied by its sensitivity. Pronounced directivity mismatch at the driver transitions, impedance/response resonances and elevated distortion spikes around the crossover remain audible concerns that EQ cannot fully solve. At 102dB Erin measured roughly 1.5dB midband compression; at 96dB distortion rises around crossover. Performance is difficult to justify at the price, and Erin explicitly did not recommend it.

Bass Extension (-10dB)50.0Hz (measured, Erin’s Audio Corner)
Bass Extension (-3dB)77Hz (measured, Erin’s Audio Corner)
DIY KitNo
Dimensions24.8”H x 15.6”W x 13.3”D
Drivers1” horn-loaded tweeter; 1.75” horn-loaded midrange; 12” woofer
ImpedanceApproximately 4 ohms minimum (measured, Erin’s Audio Corner)
Sensitivity94.5dB/2.83V/1m (measured, Erin’s Audio Corner)
Spinorama Preference Score2.27
Spinorama Preference Score with Perfect Sub5.02
Weight45 lbs (20.4 kg) each
Woofer Cabinetported, rear