MoFi SourcePoint 8 vs Klipsch RP-600M

Last updated: August 25, 2026

Short answer: the MoFi SourcePoint 8 for better sound quality, the Klipsch RP-600M for the lower price. The MoFi SourcePoint 8 ranks #17 of 131 bookshelf speakers at $2200. The Klipsch RP-600M ranks #108 at $343.22, $1856.78 cheaper.

What the MoFi SourcePoint 8 offers: 8” twin-drive concentric driver paired with a 1.25” soft dome tweeter, in a diffraction-reducing baffle design; rated 47Hz-30kHz. Notably more neutral and true-to-source than its sibling SourcePoint 10, which the reviewer found a bit too bright in the treble by comparison - measured about 4-5dB less high-frequency output. Excellent imaging: passed multiple stereo-panning and depth tests, including smooth continuous left-to-right pans without wobble and correct front-to-back layering of vocals versus percussion. Wide horizontal dispersion of about ±60°, broader than the reviewer expected from a coaxial design, and forgiving enough in placement that about 10° of toe-out variance and moving above or below the tweeter axis both still sound good. Excellent dynamic range and compression linearity - about 26dB of headroom up to 102dB/1m equivalent, with issues only appearing below about 60Hz. 8-ohm nominal impedance made it easy to drive on everything from a budget Denon AVR to a high-end Macintosh amplifier. No significant evidence of woofer-cone modulation distortion affecting the tweeter, even at 96dB/1m. Watch for: Like other coincident designs, produces diffraction dips around 4kHz and 7kHz when pointed directly on-axis; needs about 10-15° of toe-out to smooth those out. The rear-ported cabinet (two ports) means it can’t be placed too close to a wall without the bass becoming overblown - the reviewer settled on about 2 feet of clearance. F3 of 52Hz and F10 of 43Hz mean genuine deep bass tops out in the mid-40s Hz in-room - a subwoofer is still needed for true low-end extension. Harmonic distortion crosses the reviewer’s 3% threshold at 96dB (though it’s second-order and less audibly significant), and multitone distortion becomes noticeably more audible at that same output level. Vertical response doesn’t perfectly mirror horizontal, since the cabinet is a rectangle rather than a perfect square around the driver.

What the Klipsch RP-600M offers: More linear horizontal dispersion than the updated RP-600M II - as you move side-to-side, the tonal character changes less, a genuine advantage for off-axis listening consistency. Takes exceptionally well to EQ correction (miniDSP or similar), letting a knowledgeable owner fix its tonal shortcomings without needing to upgrade. Standard 6.5” woofer/horn-tweeter two-way design with reasonably gradual bass rolloff (F3 ~70Hz, F10 ~40Hz) rather than a steep vented-enclosure cutoff. Watch for: A strong, annoying resonance in the lower vocal range around 300Hz stands out clearly (though it can be EQ’d out). Overall tonal balance is notably less neutral than the newer RP-600M II, with a roughly 3-4dB suckout in the estimated in-room response. The waveguide doesn’t extend flush to the baffle edge, increasing diffraction compared to the redesigned version. Klipsch’s marketed sensitivity spec (about 96dB) is a half-space, in-room-style rating roughly 9dB above the true anechoic figure (closer to 85-86dB), which can mislead buyers comparing spec sheets. Elevated treble on-axis, similar to its successor, benefits from toe-out or careful placement. Vertical listening tolerance is limited to about ±10° from the tweeter axis. Still needs a subwoofer for real bass weight; a boost around 120Hz gives kick drums their “tambour” without the underlying “meat.”

Buy the MoFi SourcePoint 8 if sound quality matters more than the price. Buy the Klipsch RP-600M if the price matters more than sound quality.

If sound quality matters at all to you, skip the Klipsch RP-600M. It ranks near the bottom of the 131 bookshelf speakers, so look higher up the list instead.

Buy the MoFi SourcePoint 8 at Crutchfield →Buy the Klipsch RP-600M at Amazon ($343.22) →

MoFi SourcePoint 8 vs Klipsch RP-600M

Specifications Side By Side

MoFi SourcePoint 8 Klipsch RP-600M
Price$2200$343.22 Discontinued
Ranked#17 of 131 in Large Size Bookshelf Speakers#108 of 131 in Large Size Bookshelf Speakers
Bass Extension (-10dB)43Hz (measured, Erin’s Audio Corner)40Hz (measured, Erin’s Audio Corner)
Bass Extension (-3dB)52Hz (measured, Erin’s Audio Corner)73Hz (measured, Erin’s Audio Corner)
Dimensions18"H x 11.4"W x 13.2"D (457.2 x 289.6 x 335.3 mm)15.7"H x 8"W x 11.9"D (398.8 x 203.2 x 302.3 mm)
Impedance8 ohms nominal (8 ohms minimum above 80Hz, measured, Erin’s Audio Corner)8 ohms nominal, 3.5 ohms minimum (measured, Erin’s Audio Corner)
Sensitivity86.3dB (measured, Erin’s Audio Corner)85.2dB (measured, Erin’s Audio Corner)
Drivers8" woofer, 1.25-inch soft-dome tweeter6.5" Cerametallic cone woofer, 1" titanium LTS vented tweeter with Tractrix horn
Weight28 lbs / 12.7 kg each16.1 lbs / 7.3 kg each
Woofer Cabinetported, rearported
Discontinued-Yes
Buy the MoFi SourcePoint 8 at Crutchfield →Buy the Klipsch RP-600M at Amazon ($343.22) →

More useful head-to-heads from the same speaker class:

Prices on this page were last checked August 25, 2026 at 6:19 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

MoFi SourcePoint 8: $2200 Crutchfield eBay

MoFi SourcePoint 8 ranking card

Pros: 8” twin-drive concentric driver paired with a 1.25” soft dome tweeter, in a diffraction-reducing baffle design; rated 47Hz-30kHz. Notably more neutral and true-to-source than its sibling SourcePoint 10, which the reviewer found a bit too bright in the treble by comparison - measured about 4-5dB less high-frequency output. Excellent imaging: passed multiple stereo-panning and depth tests, including smooth continuous left-to-right pans without wobble and correct front-to-back layering of vocals versus percussion. Wide horizontal dispersion of about ±60°, broader than the reviewer expected from a coaxial design, and forgiving enough in placement that about 10° of toe-out variance and moving above or below the tweeter axis both still sound good. Excellent dynamic range and compression linearity - about 26dB of headroom up to 102dB/1m equivalent, with issues only appearing below about 60Hz. 8-ohm nominal impedance made it easy to drive on everything from a budget Denon AVR to a high-end Macintosh amplifier. No significant evidence of woofer-cone modulation distortion affecting the tweeter, even at 96dB/1m.

Cons: Like other coincident designs, produces diffraction dips around 4kHz and 7kHz when pointed directly on-axis; needs about 10-15° of toe-out to smooth those out. The rear-ported cabinet (two ports) means it can’t be placed too close to a wall without the bass becoming overblown - the reviewer settled on about 2 feet of clearance. F3 of 52Hz and F10 of 43Hz mean genuine deep bass tops out in the mid-40s Hz in-room - a subwoofer is still needed for true low-end extension. Harmonic distortion crosses the reviewer’s 3% threshold at 96dB (though it’s second-order and less audibly significant), and multitone distortion becomes noticeably more audible at that same output level. Vertical response doesn’t perfectly mirror horizontal, since the cabinet is a rectangle rather than a perfect square around the driver.

Full MoFi SourcePoint 8 review and specifications →

Bass Extension (-10dB)43Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)52Hz (measured, Erin's Audio Corner)
Dimensions18"H x 11.4"W x 13.2"D (457.2 x 289.6 x 335.3 mm)
Drivers8" woofer, 1.25-inch soft-dome tweeter
Impedance8 ohms nominal (8 ohms minimum above 80Hz, measured, Erin's Audio Corner)
Sensitivity86.3dB (measured, Erin's Audio Corner)
Weight28 lbs / 12.7 kg each
Woofer Cabinetported, rear
Check current price at Crutchfield →Search eBay for MoFi SourcePoint 8 →

Klipsch RP-600M: $343.22 Discontinued Amazon eBay

Klipsch RP-600M ranking card

Pros: More linear horizontal dispersion than the updated RP-600M II - as you move side-to-side, the tonal character changes less, a genuine advantage for off-axis listening consistency. Takes exceptionally well to EQ correction (miniDSP or similar), letting a knowledgeable owner fix its tonal shortcomings without needing to upgrade. Standard 6.5” woofer/horn-tweeter two-way design with reasonably gradual bass rolloff (F3 ~70Hz, F10 ~40Hz) rather than a steep vented-enclosure cutoff.

Cons: A strong, annoying resonance in the lower vocal range around 300Hz stands out clearly (though it can be EQ’d out). Overall tonal balance is notably less neutral than the newer RP-600M II, with a roughly 3-4dB suckout in the estimated in-room response. The waveguide doesn’t extend flush to the baffle edge, increasing diffraction compared to the redesigned version. Klipsch’s marketed sensitivity spec (about 96dB) is a half-space, in-room-style rating roughly 9dB above the true anechoic figure (closer to 85-86dB), which can mislead buyers comparing spec sheets. Elevated treble on-axis, similar to its successor, benefits from toe-out or careful placement. Vertical listening tolerance is limited to about ±10° from the tweeter axis. Still needs a subwoofer for real bass weight; a boost around 120Hz gives kick drums their “tambour” without the underlying “meat.”. Discontinued.

Full Klipsch RP-600M review and specifications →

Bass Extension (-10dB)40Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)73Hz (measured, Erin's Audio Corner)
Dimensions15.7"H x 8"W x 11.9"D (398.8 x 203.2 x 302.3 mm)
DiscontinuedYes
Drivers6.5" Cerametallic cone woofer, 1" titanium LTS vented tweeter with Tractrix horn
Impedance8 ohms nominal, 3.5 ohms minimum (measured, Erin's Audio Corner)
Sensitivity85.2dB (measured, Erin's Audio Corner)
Weight16.1 lbs / 7.3 kg each
Woofer Cabinetported
Check current price at Amazon ($343.22) →Search eBay for Klipsch RP-600M →