Short answer: the MoFi SourcePoint 8 for better sound quality, the Ascend Acoustics CMT-340 SE2 for the lower price. The MoFi SourcePoint 8 ranks #17 of 130 bookshelf speakers at $2594. The Ascend Acoustics CMT-340 SE2 ranks #23 at $798, $1796 cheaper.
What the MoFi SourcePoint 8 offers: 8” twin-drive concentric driver paired with a 1.25” soft dome tweeter, in a diffraction-reducing baffle design; rated 47Hz-30kHz. Notably more neutral and true-to-source than its sibling SourcePoint 10, which the reviewer found a bit too bright in the treble by comparison - measured about 4-5dB less high-frequency output. Excellent imaging: passed multiple stereo-panning and depth tests, including smooth continuous left-to-right pans without wobble and correct front-to-back layering of vocals versus percussion. Wide horizontal dispersion of about ±60°, broader than the reviewer expected from a coaxial design, and forgiving enough in placement that about 10° of toe-out variance and moving above or below the tweeter axis both still sound good. Excellent dynamic range and compression linearity - about 26dB of headroom up to 102dB/1m equivalent, with issues only appearing below about 60Hz. 8-ohm nominal impedance made it easy to drive on everything from a budget Denon AVR to a high-end Macintosh amplifier. No significant evidence of woofer-cone modulation distortion affecting the tweeter, even at 96dB/1m. Watch for: Like other coincident designs, produces diffraction dips around 4kHz and 7kHz when pointed directly on-axis; needs about 10-15° of toe-out to smooth those out. The rear-ported cabinet (two ports) means it can’t be placed too close to a wall without the bass becoming overblown - the reviewer settled on about 2 feet of clearance. F3 of 52Hz and F10 of 43Hz mean genuine deep bass tops out in the mid-40s Hz in-room - a subwoofer is still needed for true low-end extension. Harmonic distortion crosses the reviewer’s 3% threshold at 96dB (though it’s second-order and less audibly significant), and multitone distortion becomes noticeably more audible at that same output level. Vertical response doesn’t perfectly mirror horizontal, since the cabinet is a rectangle rather than a perfect square around the driver.
What the Ascend Acoustics CMT-340 SE2 offers: High-quality manufacturer Klippel NFS data shows 0.295dB on-axis average absolute deviation, 0.531 listening-window smoothness, and a strong 7.17 preference score with a subwoofer. Its dual 6.5-inch woofers, 92dB anechoic sensitivity, and 240W continuous power rating support high output and dynamics. Watch for: Bass rolls off early for the cabinet size, measuring 77.6Hz at -3dB, 64.5Hz at -6dB, and 48.3Hz at -12dB; the preference score without a subwoofer is only 4.51. The 4.35 sound-power directivity-index standard deviation also indicates more off-axis variation than the strongest designs, and the rear port needs placement clearance.
Buy the MoFi SourcePoint 8 when sound quality outweighs the price for you, and the Ascend Acoustics CMT-340 SE2 when the price outweighs sound quality instead.
Still deciding? The full Passive Home rankings cover every ranked option.
Specifications Side By Side
| MoFi SourcePoint 8 | Ascend Acoustics CMT-340 SE2 | |
|---|---|---|
| Price | $2594 per pair | $798 per pair |
| Ranked | #17 of 130 in Large Size Bookshelf Speakers | #23 of 130 in Large Size Bookshelf Speakers |
| Bass Extension (-10dB) | 43Hz (measured, Erin's Audio Corner) | approximately 53Hz (measured, spinorama.org) |
| Bass Extension (-3dB) | 52Hz (measured, Erin's Audio Corner) | 77.6Hz (measured, spinorama.org) |
| Dimensions | 18"H x 11.4"W x 13.2"D (457.2 x 289.6 x 335.3 mm) | 21 x 7.5 x 10.5 in each |
| Impedance | 8 ohms nominal (8 ohms minimum above 80Hz, measured, Erin's Audio Corner) | 8 ohms nominal |
| Sensitivity | 86.3dB (measured, Erin's Audio Corner) | 92dB at 2.83V/1m anechoic |
| Drivers | 8" woofer, 1.25-inch soft-dome tweeter | Two 6.5-inch woofers; 27mm soft-dome tweeter |
| Weight | 28 lbs (12.7 kg) each | 29.1 lbs (13.2 kg) each |
| Woofer Cabinet | ported, rear | - |
| Spinorama Preference Score | 4.39 | 4.51 |
| Spinorama Preference Score with Perfect Sub | 6.53 | 7.17 |
| Power Handling | - | 240W continuous; 400W short-term peak |
Related Speaker Comparisons
More worthwhile head-to-heads for MoFi SourcePoint 8:
- MoFi SourcePoint 8 vs Perlisten S4b
- MoFi SourcePoint 8 vs KEF Reference 1 Meta
- MoFi SourcePoint 8 vs GR-Research NX-Studio
- MoFi SourcePoint 8 vs March Audio Sointuva AWG
- MoFi SourcePoint 8 vs AsciLab C6B
Prices on this page were last checked September 16, 2026 at 12:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
MoFi SourcePoint 8: $2594 per pair Crutchfield eBay
Pros: 8” twin-drive concentric driver paired with a 1.25” soft dome tweeter, in a diffraction-reducing baffle design; rated 47Hz-30kHz. Notably more neutral and true-to-source than its sibling SourcePoint 10, which the reviewer found a bit too bright in the treble by comparison - measured about 4-5dB less high-frequency output. Excellent imaging: passed multiple stereo-panning and depth tests, including smooth continuous left-to-right pans without wobble and correct front-to-back layering of vocals versus percussion. Wide horizontal dispersion of about ±60°, broader than the reviewer expected from a coaxial design, and forgiving enough in placement that about 10° of toe-out variance and moving above or below the tweeter axis both still sound good. Excellent dynamic range and compression linearity - about 26dB of headroom up to 102dB/1m equivalent, with issues only appearing below about 60Hz. 8-ohm nominal impedance made it easy to drive on everything from a budget Denon AVR to a high-end Macintosh amplifier. No significant evidence of woofer-cone modulation distortion affecting the tweeter, even at 96dB/1m. Measured bass extension of 52Hz (-3dB), with a measured sensitivity of 86.3dB.
Cons: Like other coincident designs, produces diffraction dips around 4kHz and 7kHz when pointed directly on-axis; needs about 10-15° of toe-out to smooth those out. The rear-ported cabinet (two ports) means it can’t be placed too close to a wall without the bass becoming overblown - the reviewer settled on about 2 feet of clearance. F3 of 52Hz and F10 of 43Hz mean genuine deep bass tops out in the mid-40s Hz in-room - a subwoofer is still needed for true low-end extension. Harmonic distortion crosses the reviewer’s 3% threshold at 96dB (though it’s second-order and less audibly significant), and multitone distortion becomes noticeably more audible at that same output level. Vertical response doesn’t perfectly mirror horizontal, since the cabinet is a rectangle rather than a perfect square around the driver.
Full MoFi SourcePoint 8 review and specifications →
| Bass Extension (-10dB) | 43Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 52Hz (measured, Erin's Audio Corner) |
| Dimensions | 18"H x 11.4"W x 13.2"D (457.2 x 289.6 x 335.3 mm) |
| Drivers | 8" woofer, 1.25-inch soft-dome tweeter |
| Impedance | 8 ohms nominal (8 ohms minimum above 80Hz, measured, Erin's Audio Corner) |
| Sensitivity | 86.3dB (measured, Erin's Audio Corner) |
| Spinorama Preference Score | 4.39 |
| Spinorama Preference Score with Perfect Sub | 6.53 |
| Weight | 28 lbs (12.7 kg) each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Erin’s Audio Corner: Why Do People Love the MoFi SourcePoint 8? More from Erin’s Audio Corner →
- Erin’s Audio Corner Website MoFi SourcePoint 8
- Erin’s Audio Corner: Upgrade Your Sound with These 6 Surprisingly Affordable Speakers!
- Erin’s Audio Corner: My Personal Favorite Speakers Under $2500
- Erin’s Audio Corner: My Top Picks of 2023: Must-Haves Under $3000
- GR-Research: Danny Tackles Andrews Jones: The Source Point 8! Spoiler Alert (It’s Really Good) More from GR-Research →
- Erin’s Audio Corner Measurements (spinorama.org)
- Head-to-Head Comparisons
- MoFi SourcePoint 8 vs Buchardt Audio E50
- MoFi SourcePoint 8 vs KEF R3
- MoFi SourcePoint 8 vs Epos ES14N
- MoFi SourcePoint 8 vs AsciLab F6Bs
- MoFi SourcePoint 8 vs Wharfedale Aura 2
- MoFi SourcePoint 8 vs Arendal 1528 Monitor 8
- MoFi SourcePoint 8 vs KEF Q Concerto Meta
- MoFi SourcePoint 8 vs KEF R3 Meta
- See all 57 comparisons
Ascend Acoustics CMT-340 SE2: $798 per pair Ascend Acoustics eBay
Pros: High-quality manufacturer Klippel NFS data shows 0.295dB on-axis average absolute deviation, 0.531 listening-window smoothness, and a strong 7.17 preference score with a subwoofer. Its dual 6.5-inch woofers, 92dB anechoic sensitivity, and 240W continuous power rating support high output and dynamics. Measured bass extension of 77.6Hz (-3dB).
Cons: Bass rolls off early for the cabinet size, measuring 77.6Hz at -3dB, 64.5Hz at -6dB, and 48.3Hz at -12dB; the preference score without a subwoofer is only 4.51. The 4.35 sound-power directivity-index standard deviation also indicates more off-axis variation than the strongest designs, and the rear port needs placement clearance.
Full Ascend Acoustics CMT-340 SE2 review and specifications →
| Bass Extension (-10dB) | approximately 53Hz (measured, spinorama.org) |
|---|---|
| Bass Extension (-3dB) | 77.6Hz (measured, spinorama.org) |
| Dimensions | 21 x 7.5 x 10.5 in each |
| Drivers | Two 6.5-inch woofers; 27mm soft-dome tweeter |
| Impedance | 8 ohms nominal |
| Power Handling | 240W continuous; 400W short-term peak |
| Sensitivity | 92dB at 2.83V/1m anechoic |
| Spinorama Preference Score | 4.51 |
| Spinorama Preference Score with Perfect Sub | 7.17 |
| Weight | 29.1 lbs (13.2 kg) each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Ascend Acoustics CMT-340 SE2 vs Arendal 1528 Monitor 8
- Ascend Acoustics CMT-340 SE2 vs Wharfedale Super Linton
- Ascend Acoustics CMT-340 SE2 vs AsciLab F6Bs
- Ascend Acoustics CMT-340 SE2 vs MoFi SourcePoint 10
- Ascend Acoustics CMT-340 SE2 vs Radiant Acoustics Clarity 6.2
- Ascend Acoustics CMT-340 SE2 vs Dynaudio Heritage Special
- Ascend Acoustics CMT-340 SE2 vs Buchardt Audio E50
- Ascend Acoustics CMT-340 SE2 vs KEF R3
- See all 44 comparisons


