Short answer: both are discontinued, so this only matters if you are buying used. Used, the MartinLogan Dynamo 1600X is the better pick: it ranks #3 of 212 subwoofers by sound quality (rated 4.2/5), against #136 (rated 3.6/5) for the Monoprice 10in Powered Studio Multimedia.
The MartinLogan Dynamo 1600X is the better-sounding pick. A sealed 15 inch subwoofer with forceful, tight bass, front or down firing setup, and app based room correction, now discontinued. Watch for: Output falls to 86.2dB at 15Hz, so the very lowest effects are weaker than the strong midbass numbers suggest.
The case for the Monoprice 10in Powered Studio Multimedia: An affordable 10 inch studio subwoofer with balanced XLR and quarter inch inputs for pairing with studio monitors. The tradeoff: Output drops sharply below 40Hz, to 97.2dB at 31.5Hz and only 73.3dB at 20Hz, so the lowest effects are barely there despite the rated 20Hz.
Buy the MartinLogan Dynamo 1600X only if you find one used in good condition; both are discontinued, and it is the better rated of the two.
Looking for alternatives? See the complete Subwoofers rankings.
A sealed 15 inch subwoofer with forceful, tight bass, front or down firing setup, and app based room correction, now discontinued.
An affordable 10 inch studio subwoofer with balanced XLR and quarter inch inputs for pairing with studio monitors.
Prices on this page were last checked October 31, 2026 at 7:11 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
Specifications Side By Side
| MartinLogan Dynamo 1600X | Monoprice 10in Powered Studio Multimedia | |
|---|---|---|
| Price | $1,606.77 Discontinued | $199 Discontinued |
| Ranked | #3 of 212 in Medium Home Subwoofers (30-75 lbs) | #136 of 212 in Medium Home Subwoofers (30-75 lbs) |
| Enclosure | sealed | ported, rear |
| Output SPL at 15 Hz | 86.2 dB | - |
| Output SPL at 20 Hz | 99.4 dB | 73.3 dB |
| Output SPL at 25 Hz | 103.9 dB | 84.6 dB |
| Output SPL at 31.5 Hz | 111.7 dB | 97.2 dB |
| Output SPL at 40 Hz | 118.4 dB | 105.0 dB |
| Output SPL at 50 Hz | 121.0 dB | 109.9 dB |
| Output SPL at 63 Hz | 121.8 dB | 113.4 dB |
| Output SPL at 80 Hz | 121.0 dB | 115.2 dB |
| Output SPL at 100 Hz | 120.2 dB | - |
| Output SPL at 125 Hz | 119.0 dB | - |
| CEA-2010-A Average (40-80Hz) | 120.5 dB | 110.9 dB |
| Dimensions | 20.1”H x 17.9”W x 19.1”D (510.5 x 454.7 x 485.1 mm) | 12.5”H x 14.5”W x 15”D (317.5 x 368.3 x 381.0 mm) |
| Weight | 56 lbs (25.4 kg) | 44.1 lbs (20.0 kg) |
| Warranty | 3 | 1 |
| Cabinet Color | black | black |
| Country | United States | United States |
| Measurement Source | Audioholics | Brent Butterworth |
| Frequency Response | 20-200Hz, ±3dB | 20-150Hz |
| Amplifier Power | 900W RMS / 1800W peak | 200W RMS |
| Inputs | RCA (stereo and LFE), XLR (LFE), speaker-level (banana) | XLR (2), TRS (2), unbalanced TS (2) |
| Drivers | 15” (381mm) driver | 10” (254mm) driver |
| XLR Input | Yes | Yes |
| RCA Input | Yes | No |
| TRS Input | No | Yes |
| Optical Input | No | No |
| Coaxial Input | No | No |
| USB Input | No | No |
| HDMI Input | No | No |
| AES Input | No | No |
| Aux Input | No | No |
Related Speaker Comparisons
More top alternatives to MartinLogan Dynamo 1600X: