Short answer: the LD Systems Stinger 10-A-G3. It ranks #5 of 39 10-inch pa speakers by sound quality, rated 4.1/5, at $674; the RCF ART 910-A ranks #11, rated 3.9/5, and costs $799, so there is little reason to consider the other one.
The case for the LD Systems Stinger 10-A-G3: Medium-quality vendor data returns a 5.89 ideal-subwoofer preference score with 49Hz measured extension, a genuinely deep result for an affordable 10-inch box. Watch for: Its 127dB peak claim is modest next to the higher-output rivals here, and its 90° x 50° horn is on the narrower side.
What the RCF ART 910-A does well: The 10-inch model of RCF’s ART 9 line, built on the same 2,100W bi-amplifier, 1.75” voice coil compression driver and FiRPHASE/Bass Motion Control tuning as the measured RCF ART 912-A and RCF ART 932-A. The catch: No independent measurements yet, so it can’t be compared with ranked PA speakers.
Buy the LD Systems Stinger 10-A-G3. It is rated higher for sound quality than the RCF ART 910-A and costs less, so it is the default pick unless a specific strength of the other one matters more to you.
About the ratings: the RCF ART 910-A’s rating is estimated from measured siblings and predecessors rather than its own measurements, with a likely range of 3.6 to 4.2, so this verdict could change once it is measured.
Looking for alternatives? See the complete PA & Live Sound rankings.
Specifications Side By Side
| LD Systems Stinger 10-A-G3 | RCF ART 910-A | |
|---|---|---|
| Price | $674.00 | $799.00 |
| Ranked | #5 of 39 in 10-Inch PA Speakers | #11 of 39 in 10-Inch PA Speakers Estimated |
| Passive | No | No |
| Configuration | Active 2-way bass-reflex PA speaker | Active 2-way bass-reflex PA speaker |
| Drivers | 10” woofer, 1” compression driver | 10” woofer with 2.5” voice coil, 1” exit/1.75” voice coil compression driver |
| Frequency Response | 65Hz - 20kHz (manufacturer specified) | 50Hz - 20kHz (manufacturer specified) |
| Dimensions | 20.7”H x 12.8”W x 12.1”D (527 x 325 x 308 mm) | - |
| Inputs | 2 x XLR/TRS line/mic inputs; XLR mono mix output | - |
| Amplifier Power | 600W peak / 300W RMS | 2,100W peak (1,050W RMS), bi-amplified |
| Cabinet Material | 12mm plywood with polyurea coating | - |
| Rigging | M10 suspension points; 36mm Dual-Tilt pole mount | 35mm pole mount; optional flying bracket |
| Coverage | 90° x 50° | 100° x 60° |
| Maximum SPL | 127dB peak (manufacturer specified) | 130dB peak (manufacturer specified) |
| Bass Extension (-3dB) | 56Hz (measured, vendor Spinorama data) | - |
| DSP | Yes | Yes |
| Bluetooth | No | No |
| Weight | 28 lbs (12.7 kg) | 34.8 lbs (15.8 kg) |
| Spinorama Preference Score | 3.57 | - |
| Spinorama Preference Score with Perfect Sub | 5.89 | - |
| XLR Input | Yes | Yes |
| RCA Input | No | - |
| TRS Input | Yes | - |
| Optical Input | No | - |
| Coaxial Input | No | - |
| USB Input | No | - |
| HDMI Input | No | - |
| AES Input | No | - |
| Aux Input | No | - |
| Microphone Input | Yes | - |
| Guitar Input | No | - |
Related Speaker Comparisons
More worthwhile head-to-heads for LD Systems Stinger 10-A-G3:
- LD Systems DDQ10 vs LD Systems Stinger 10-A-G3
- HK Audio LINEAR 7 110 XA vs LD Systems Stinger 10-A-G3
- HK Audio LINEAR 9 110 XA vs LD Systems Stinger 10-A-G3
- FBT ProMaxX 110A vs LD Systems Stinger 10-A-G3
- LD Systems Stinger 10-A-G3 vs Turbosound NuQ102
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
LD Systems Stinger 10-A-G3: $674.00 Amazon eBay
Same family: the LD Systems Stinger 8-A-G3 (smaller model, rated 3.7/5), the LD Systems Stinger 28-A-G3 (smaller model, rated 3.5/5), the LD Systems Stinger 12 A G3 (larger model, rated 3.5/5) and the LD Systems Stinger 15-A-G3 (larger model, rated 3.4/5).
Pros: Medium-quality vendor data returns a 5.89 ideal-subwoofer preference score with 49Hz measured extension, a genuinely deep result for an affordable 10-inch box. At 12.7kg it is one of the lightest active speakers in this ranking. Measured bass extension of 56Hz (-3dB).
Cons: Its 127dB peak claim is modest next to the higher-output rivals here, and its 90° x 50° horn is on the narrower side.
Full LD Systems Stinger 10-A-G3 review and specifications →
| AES Input | No |
|---|---|
| Amplifier Power | 600W peak / 300W RMS |
| Aux Input | No |
| Bass Extension (-3dB) | 56Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | 12mm plywood with polyurea coating |
| Coaxial Input | No |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 90° x 50° |
| DSP | Yes |
| Dimensions | 20.7”H x 12.8”W x 12.1”D (527 x 325 x 308 mm) |
| Drivers | 10” woofer, 1” compression driver |
| Frequency Response | 65Hz - 20kHz (manufacturer specified) |
| Guitar Input | No |
| HDMI Input | No |
| Inputs | 2 x XLR/TRS line/mic inputs; XLR mono mix output |
| Maximum SPL | 127dB peak (manufacturer specified) |
| Microphone Input | Yes |
| Optical Input | No |
| Passive | No |
| RCA Input | No |
| Rigging | M10 suspension points; 36mm Dual-Tilt pole mount |
| Spinorama Preference Score | 3.57 |
| Spinorama Preference Score with Perfect Sub | 5.89 |
| TRS Input | Yes |
| USB Input | No |
| Weight | 28 lbs (12.7 kg) |
| XLR Input | Yes |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- LD Systems Stinger 10-A-G3 vs HK Audio LINEAR 9 110 XA
- LD Systems Stinger 10-A-G3 vs FBT ProMaxX 110A
- LD Systems Stinger 10-A-G3 vs Turbosound NuQ102
- LD Systems Stinger 10-A-G3 vs HK Audio LINEAR 7 110 XA
- LD Systems Stinger 10-A-G3 vs LD Systems DDQ10
- LD Systems Stinger 10-A-G3 vs dB Technologies Opera Reevo 210
RCF ART 910-A: $799.00 Estimated Amazon eBay
Same family: the RCF ART 912-A (larger model, rated 4.1/5), the RCF ART 932-A (larger model, rated 4.2/5), the RCF ART 915-A (larger model, estimated 3.8/5), the RCF ART 935-A (larger model, rated 3.9/5) and the RCF ART 945-A (larger model, rated 4.4/5).
Pros: The 10-inch model of RCF’s ART 9 line, built on the same 2,100W bi-amplifier, 1.75” voice coil compression driver and FiRPHASE/Bass Motion Control tuning as the measured RCF ART 912-A and RCF ART 932-A. RCF rates it at 130dB peak with 100° x 60° coverage and bass to 50Hz, and the fanless amplifier keeps it quiet on stage.
Cons: No independent measurements yet, so it can’t be compared with ranked PA speakers. Its 10-inch woofer gives up some low end to the 12-inch and 15-inch ART 9 models, so it suits vocals and smaller rooms or use with a subwoofer.
Full RCF ART 910-A review and specifications →
| Released | Jul 2021 (5 years ago) |
|---|---|
| Amplifier Power | 2,100W peak (1,050W RMS), bi-amplified |
| Bluetooth | No |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 100° x 60° |
| DSP | Yes |
| Drivers | 10” woofer with 2.5” voice coil, 1” exit/1.75” voice coil compression driver |
| Frequency Response | 50Hz - 20kHz (manufacturer specified) |
| Maximum SPL | 130dB peak (manufacturer specified) |
| Passive | No |
| Rigging | 35mm pole mount; optional flying bracket |
| Weight | 34.8 lbs (15.8 kg) |
| XLR Input | Yes |
- Links
- Reviews, Comparisons and Sound Samples
- No independent measurement review is linked for this model; it is ranked from hands-on listening and comparison against similarly priced speakers.
- Head-to-Head Comparisons


