Klipsch RP-600M II vs Wharfedale Super Linton

Last updated: August 25, 2026

Short answer: the Wharfedale Super Linton for better sound quality, the Klipsch RP-600M II for the lower price. The Wharfedale Super Linton ranks #24 of 131 bookshelf speakers at $2699. The Klipsch RP-600M II ranks #75 at $489.99, $2209.01 cheaper.

What the Klipsch RP-600M II offers: Redesigned waveguide extends flush to the baffle edge, reducing diffraction compared to the original RP-600M. Roughly 10-20° wider horizontal radiation than the original, giving more soundstage envelopment while retaining precise imaging. A major step up in overall tonal neutrality compared to the original RP-600M, largely eliminating that model’s midrange resonance issues. Unusually, sounds better with the grille on - the grille smooths out the elevated treble rather than degrading the sound, a rare trait among speakers the reviewer has tested. More refined back-panel hardware, including anodized binding posts and jumper cables for optional bi-amping. Responds well to EQ correction (verified using measurement software and a miniDSP), letting the on-axis response be made genuinely linear. Watch for: On-axis, the treble runs notably hot - even hotter than the original RP-600M in some respects - and needs about 20° of toe-out or the grille installed to sound balanced. Horizontal dispersion is very slightly less linear across angles than the original RP-600M, a minor trade-off for the wider overall radiation pattern. Klipsch’s marketed sensitivity (about 94.5dB) is, like the original, a half-space rating roughly 9dB above the anechoic reality (closer to 85-86dB). In-room bass rolls off around 60Hz in practice, and a 120Hz boost paired with a midrange scoop gives kick drums their “tambour” without real low-end weight - a subwoofer is still recommended. Vertical listening tolerance is limited to about ±10° from the tweeter axis. Toeing the speaker out for better on-axis tonality (rather than using the grille) introduces slightly more diffuse imaging from added sidewall reflections.

What the Wharfedale Super Linton offers: Three-way design with a 1” soft dome tweeter, 5” woven Kevlar mid-range, and 8” woven Kevlar woofer in a dual rear-ported, heavily damped MDF/particle-board cabinet. Comes as a genuinely matched pair (measured within about 1dB of each other) and includes custom matching stands. A major dynamic-range improvement over the original Heritage Linton - kick drums retain their impact from low to high volume instead of compressing, the standout objective improvement in this update. Fixes the original Linton’s main flaw: a 1-3kHz scoop that made it sound a bit soft and subdued is filled in here, giving noticeably more attack and dynamic punch. About 3dB more sensitivity than the original Linton (measured ~88.2dB), meaning roughly half the amplifier power for the same output. Wide horizontal radiation of about ±70°, right in the reviewer’s preferred range for an enveloping soundstage. Lower midrange distortion than the original Linton. Bass-shelf tuning intentionally allows closer-to-wall placement (about 1 foot worked well) without excess boominess, more flexible than the original Linton in that regard. Watch for: Rolls off earlier than the original Linton (F3 77Hz versus the original’s 52Hz), a deliberate trade-off for the closer-wall-placement flexibility. On-axis, there’s a mild treble lift around 4-6kHz that can sound a touch sibilant, though the reviewer found it not very noteworthy in practice. Diffraction shows up around 1.5-2kHz on-axis; needs about 10° of toe-out to smooth this out, though going further to 30° starts to lose some top-end air. Distortion peaks slightly higher than the original Linton in the 50-70Hz region. Minimum impedance dips to about 3 ohms around 150Hz, so a 4-ohm-stable amplifier is recommended for best results. Vertical dispersion of about ±20° means multi-row home theater seating outside that window will hear reduced top-end. Asymmetrical design requires attention to setup (tweeters need to face outward) for the most linear in-room response. A costly upgrade for existing Linton owners if the original’s specific flaws didn’t bother them.

Buy the Klipsch RP-600M II if the price matters more than sound quality. Buy the Wharfedale Super Linton if sound quality matters more than the price.

Buy the Wharfedale Super Linton at Amazon ($2,699.00) →Buy the Klipsch RP-600M II at Amazon ($489.99) →

Klipsch RP-600M II vs Wharfedale Super Linton

Specifications Side By Side

Klipsch RP-600M II Wharfedale Super Linton
Price$489.99$2,699.00
Ranked#75 of 131 in Large Size Bookshelf Speakers#24 of 131 in Large Size Bookshelf Speakers
Bass Extension (-10dB)41Hz (measured, Erin’s Audio Corner)34Hz (measured, Erin’s Audio Corner)
Bass Extension (-3dB)70Hz (measured, Erin’s Audio Corner)77Hz (measured, Erin’s Audio Corner)
Dimensions15.7"H x 8"W x 12.5"D (398.8 x 203.2 x 317.5 mm)23.8"H x 11.8"W x 13"D (604.5 x 299.7 x 330.2 mm)
Impedance8 ohms nominal (3.5 ohms minimum above 80Hz, measured by Erin’s Audio Corner)4 ohms nominal (3 ohms minimum, measured, Erin’s Audio Corner)
Sensitivity86dB (measured, Erin’s Audio Corner)88.2dB (measured, Erin’s Audio Corner)
Drivers6.5" Cerametallic cone woofer, 1" titanium LTS vented tweeter with Tractrix horn8"(200mm) black woven Kevlar® cone woofer, 5"(135mm) black woven Kevlar® cone midrange, 1" (25mm) soft dome tweeter
Weight13 lbs / 5.9 kg each43.7 lbs / 19.8 kg each
Woofer Cabinetportedported, rear
Buy the Wharfedale Super Linton at Amazon ($2,699.00) →Buy the Klipsch RP-600M II at Amazon ($489.99) →

More useful head-to-heads from the same speaker class:

Prices on this page were last checked August 25, 2026 at 6:19 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Klipsch RP-600M II: $489.99 Amazon eBay

Klipsch RP-600M II ranking card

Pros: Redesigned waveguide extends flush to the baffle edge, reducing diffraction compared to the original RP-600M. Roughly 10-20° wider horizontal radiation than the original, giving more soundstage envelopment while retaining precise imaging. A major step up in overall tonal neutrality compared to the original RP-600M, largely eliminating that model’s midrange resonance issues. Unusually, sounds better with the grille on - the grille smooths out the elevated treble rather than degrading the sound, a rare trait among speakers the reviewer has tested. More refined back-panel hardware, including anodized binding posts and jumper cables for optional bi-amping. Responds well to EQ correction (verified using measurement software and a miniDSP), letting the on-axis response be made genuinely linear.

Cons: On-axis, the treble runs notably hot - even hotter than the original RP-600M in some respects - and needs about 20° of toe-out or the grille installed to sound balanced. Horizontal dispersion is very slightly less linear across angles than the original RP-600M, a minor trade-off for the wider overall radiation pattern. Klipsch’s marketed sensitivity (about 94.5dB) is, like the original, a half-space rating roughly 9dB above the anechoic reality (closer to 85-86dB). In-room bass rolls off around 60Hz in practice, and a 120Hz boost paired with a midrange scoop gives kick drums their “tambour” without real low-end weight - a subwoofer is still recommended. Vertical listening tolerance is limited to about ±10° from the tweeter axis. Toeing the speaker out for better on-axis tonality (rather than using the grille) introduces slightly more diffuse imaging from added sidewall reflections.

Full Klipsch RP-600M II review and specifications →

Bass Extension (-10dB)41Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)70Hz (measured, Erin's Audio Corner)
Dimensions15.7"H x 8"W x 12.5"D (398.8 x 203.2 x 317.5 mm)
Drivers6.5" Cerametallic cone woofer, 1" titanium LTS vented tweeter with Tractrix horn
Impedance8 ohms nominal (3.5 ohms minimum above 80Hz, measured by Erin's Audio Corner)
Sensitivity86dB (measured, Erin's Audio Corner)
Weight13 lbs / 5.9 kg each
Woofer Cabinetported
Check current price at Amazon ($489.99) →Search eBay for Klipsch RP-600M II →

Wharfedale Super Linton: $2,699.00 Amazon Crutchfield eBay

Wharfedale Super Linton ranking card

Pros: Three-way design with a 1” soft dome tweeter, 5” woven Kevlar mid-range, and 8” woven Kevlar woofer in a dual rear-ported, heavily damped MDF/particle-board cabinet. Comes as a genuinely matched pair (measured within about 1dB of each other) and includes custom matching stands. A major dynamic-range improvement over the original Heritage Linton - kick drums retain their impact from low to high volume instead of compressing, the standout objective improvement in this update. Fixes the original Linton’s main flaw: a 1-3kHz scoop that made it sound a bit soft and subdued is filled in here, giving noticeably more attack and dynamic punch. About 3dB more sensitivity than the original Linton (measured ~88.2dB), meaning roughly half the amplifier power for the same output. Wide horizontal radiation of about ±70°, right in the reviewer’s preferred range for an enveloping soundstage. Lower midrange distortion than the original Linton. Bass-shelf tuning intentionally allows closer-to-wall placement (about 1 foot worked well) without excess boominess, more flexible than the original Linton in that regard.

Cons: Rolls off earlier than the original Linton (F3 77Hz versus the original’s 52Hz), a deliberate trade-off for the closer-wall-placement flexibility. On-axis, there’s a mild treble lift around 4-6kHz that can sound a touch sibilant, though the reviewer found it not very noteworthy in practice. Diffraction shows up around 1.5-2kHz on-axis; needs about 10° of toe-out to smooth this out, though going further to 30° starts to lose some top-end air. Distortion peaks slightly higher than the original Linton in the 50-70Hz region. Minimum impedance dips to about 3 ohms around 150Hz, so a 4-ohm-stable amplifier is recommended for best results. Vertical dispersion of about ±20° means multi-row home theater seating outside that window will hear reduced top-end. Asymmetrical design requires attention to setup (tweeters need to face outward) for the most linear in-room response. A costly upgrade for existing Linton owners if the original’s specific flaws didn’t bother them.

Full Wharfedale Super Linton review and specifications →

Bass Extension (-10dB)34Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)77Hz (measured, Erin's Audio Corner)
Dimensions23.8"H x 11.8"W x 13"D (604.5 x 299.7 x 330.2 mm)
Drivers8"(200mm) black woven Kevlar® cone woofer, 5"(135mm) black woven Kevlar® cone midrange, 1" (25mm) soft dome tweeter
Impedance4 ohms nominal (3 ohms minimum, measured, Erin's Audio Corner)
Sensitivity88.2dB (measured, Erin's Audio Corner)
Weight43.7 lbs / 19.8 kg each
Woofer Cabinetported, rear
Check current price at Amazon ($2,699.00) →Check current price at Crutchfield →Search eBay for Wharfedale Super Linton →