Different classes, so treat this as a step-up-or-not question rather than a head-to-head. The KEF R11 Meta ranks #7 of 25 floorstanding speakers at $3499.99; the MoFi SourcePoint 10 ranks #8 of 47 bookshelf speakers at $3500.
What the KEF R11 Meta gets right: CEA2034 spinorama shows a generally flat on-axis response with good directivity and very deep bass extension (F10 of 30Hz). The catch: A dip around 1-1.2kHz on-axis is attributed to a diffraction effect, and shows up as a smaller dip in the predicted in-room response.
On the MoFi SourcePoint 10 side: Andrew Jones-designed concentric/coincident driver delivers best-in-class sound power and early-reflections directivity in the reviewer’s. The tradeoff: Like virtually all coincident designs, sounds notably bright pointed directly on-axis due to a deliberate treble lift (meant to compensate.
Buy the KEF R11 Meta at $3499.99 if you want a floorstanding speaker. Buy the MoFi SourcePoint 10 at $3500 if you want a bookshelf speaker instead.
Specifications Side By Side
| KEF R11 Meta | MoFi SourcePoint 10 | |
|---|---|---|
| Price | $3,499.99 | $3500 |
| Ranked | #7 of 25 in Large Size Floorstanding Speakers | #8 of 47 in Large Size Bookshelf Speakers |
| Bass Extension (-10dB) | 31Hz | 38Hz |
| Bass Extension (-3dB) | 64Hz | 56Hz |
| Dimensions | 51"H x 12.2"W x 15.1"D (1295.4 x 309.9 x 383.5 mm) | 22.5"H x 14.5"W x 16.6"D (571.5 x 368.3 x 421.6 mm) |
| Impedance | 4 ohms | 8 ohms |
| Drivers | 4 x 165 mm (6.5 in.) hybrid aluminium cone woofers, 125 mm (5 in.) aluminium cone midrange, 25 mm (1 in.) vented aluminium dome with MAT tweeter | 10" Paper-pulp Cone woofer, 1.25-inch soft-dome tweeter |
| Sensitivity | 89.5dB | 88dB |
| Weight | 80.5 lbs / 36.5 kg each | 46.3 lbs / 21.0 kg each |
| Woofer Cabinet | Rear ported | Rear ported |
The Two Speakers In Full
KEF R11 Meta: $3,499.99 Amazon
Pros: CEA2034 spinorama shows a generally flat on-axis response with good directivity and very deep bass extension (F10 of 30Hz). Predicted in-room response is very smooth aside from the small 1-1.5kHz dip. The coaxial Uni-Q driver gives excellent, symmetric vertical directivity, unusual for a tower speaker. Distortion is incredibly low even down to 30Hz at 86dB SPL/1m, and stays low even at 96dB and 102dB SPL/1m - the reviewer found essentially no audible tonality change across that whole output range.
Cons: A dip around 1-1.2kHz on-axis is attributed to a diffraction effect, and shows up as a smaller dip in the predicted in-room response. Horizontal beamwidth of about ±40 degrees is on the narrower side, though the transition from wide to constant directivity is smooth. Minimum impedance dips to 3.2 ohms around 580Hz, calling for an amplifier comfortable with a demanding load. 4-ohm nominal impedance overall.
| Bass Extension (-10dB) | 31Hz |
|---|---|
| Bass Extension (-3dB) | 64Hz |
| Dimensions | 51"H x 12.2"W x 15.1"D (1295.4 x 309.9 x 383.5 mm) |
| Drivers | 4 x 165 mm (6.5 in.) hybrid aluminium cone woofers, 125 mm (5 in.) aluminium cone midrange, 25 mm (1 in.) vented aluminium dome with MAT tweeter |
| Impedance | 4 ohms |
| Sensitivity | 89.5dB |
| Weight | 80.5 lbs / 36.5 kg each |
| Woofer Cabinet | Rear ported |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Links
MoFi SourcePoint 10: $3500 Crutchfield
Pros: Andrew Jones-designed concentric/coincident driver delivers best-in-class sound power and early-reflections directivity in the reviewer’s testing - a genuine “point source” design. Vertical and horizontal radiation patterns closely match each other (about ±50° horizontal, ±30-40° vertical), a hallmark benefit of a well-executed concentric driver. Distortion stays low - under 1% above 100Hz at 86dB, and under 3% up to 100Hz even at 96dB, better than the reviewer expected from a low-excursion waveguide-loaded woofer. Surprisingly strong dynamic capability with little audible compression at both low and high volume. Widely spaced (about 11 feet apart) with roughly 15° of toe-out produced a huge, expansive soundstage without significant loss of imaging precision. Solidly built cabinet (about 40 lbs, heavily braced) minimizes cabinet resonance.
Cons: Like virtually all coincident designs, sounds notably bright pointed directly on-axis due to a deliberate treble lift (meant to compensate for the 28mm tweeter’s earlier beaming versus a typical 25mm/1” tweeter) combined with a diffraction dip/peak from the waveguide edge; needs about 15° of toe-out to sound neutral, and even then benefits from an extra 1-2dB of treble EQ. Toeing out further (to 30°) flattens the treble further but introduces a dip in the midrange-to-tweeter crossover region - there’s no single toe-out angle that fixes everything at once. F3 of 56Hz and F10 of 38Hz (about 40Hz in-room) mean genuine deep bass is limited; the reviewer would pair it with a sealed 10” or 12” subwoofer for regular daily listening. Bass extension and cabinet placement trade off against midrange cleanliness: placing it close to a wall for more bass risks a wall-bounce suckout in the midrange (roughly 200-500Hz depending on distance). Not perfectly time-aligned between tweeter and woofer (about 0.4ms delta), an inherent limitation of passive coincident drivers versus actively time-corrected designs. Some resonances appear in measurements, likely port-related. Minimum impedance around 6.4 ohms with EPDR near 3 ohms, so the reviewer recommends sticking with a 4-ohm-rated amplifier to be safe.
| Bass Extension (-10dB) | 38Hz |
|---|---|
| Bass Extension (-3dB) | 56Hz |
| Dimensions | 22.5"H x 14.5"W x 16.6"D (571.5 x 368.3 x 421.6 mm) |
| Drivers | 10" Paper-pulp Cone woofer, 1.25-inch soft-dome tweeter |
| Impedance | 8 ohms |
| Sensitivity | 88dB |
| Weight | 46.3 lbs / 21.0 kg each |
| Woofer Cabinet | Rear ported |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- MoFi SourcePoint 10 vs KEF Q Concerto Meta
- MoFi SourcePoint 10 vs MoFi SourcePoint 8
- MoFi SourcePoint 10 vs KEF R3 Meta
- MoFi SourcePoint 10 vs Radiant Acoustics Clarity 6.2
- MoFi SourcePoint 10 vs AsciLab C6B
- MoFi SourcePoint 10 vs HiVi Swans 3.1A Sehlin Sound Solutions mod
- MoFi SourcePoint 10 vs GR-Research NX-Studio
- MoFi SourcePoint 10 vs ELAC DB63
- See all 12 comparisons
- Links
As an Amazon Associate I earn from qualifying purchases.
Product prices and availability were last checked August 9, 2026 at 6:57 AM UTC and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.