Short answer: the IK Multimedia iLoud MTM MKII for better sound quality, the Pioneer DJ VM-50 for the lower price. The IK Multimedia iLoud MTM MKII ranks #20 of 58 powered bookshelf speakers at $799.99. The Pioneer DJ VM-50 ranks #44 at $169, $630.99 cheaper.
What the IK Multimedia iLoud MTM MKII offers: Compact MTM layout (two 3.5” midwoofers flanking a 1” tweeter) powered monitor rated at 100W per speaker with XLR input, sold as a pair with an ARC room-correction microphone included. Well-suited to nearfield desktop use, with linearity good enough for mixing or mastering. The bundled auto room-correction mic is genuinely effective - in testing it resolved specific room resonance peaks around 150Hz and 220Hz, making the midrange sound noticeably more lifelike. Back-panel switches allow desktop vs. free-field placement plus treble and bass trim. Harmonic distortion is good at a moderate 86dB output, appropriate for a speaker of this size. Watch for: Native treble tuning still runs about 3dB hot on-axis; the back-panel -3dB treble switch overcorrects, and roughly -1.5dB via external EQ works better. Vertical MTM lobing means staying within about 20-25° of the tweeter axis, or the upper-midrange to treble transition suffers significant suckout - the speaker should never be laid on its side unless the tweeter is pointed directly at the listener, or comb filtering results. Bass falls off sharply below its F3 of 51Hz (F10 45Hz), so a subwoofer is needed for anything lower. Multitone distortion rises sharply at 96dB/1m, and the reviewer recommends not exceeding about 86dB for extended listening at any distance - broadband output for the pair tops out around 94dB at 1 meter, with dynamic range essentially collapsing approaching 102dB. Horizontal directivity narrows with frequency rather than staying constant. Adding a subwoofer with an 80Hz crossover doesn’t meaningfully improve the distortion headroom, even though it does extend the low end.
What the Pioneer DJ VM-50 offers: Compact active monitor with 96kHz DSP, 4mm aluminum front baffle, 5.25-inch aramid woofer and constant-directivity horn. Erin measured F3 at 61Hz, low distortion at 86 and 96dB, almost no long-term compression above 50Hz and only roughly quarter-decibel dynamic nonlinearity. Four-position low- and high-EQ controls yield 16 useful voicings, while balanced TRS/XLR and RCA inputs suit studio and consumer sources. Watch for: The default axial response is not reference-flat and the upper-mid/treble directivity behavior varies with angle; correct EQ-switch selection and listening geometry matter. Bass does not reach 50Hz at reference level despite its pleasing punch, making a subwoofer useful. Output is appropriate for nearfield use rather than home-theater distance. As an internally amplified monitor, passive impedance and sensitivity measurements are not applicable.
Buy the IK Multimedia iLoud MTM MKII if sound quality matters more than the price. Buy the Pioneer DJ VM-50 if the price matters more than sound quality.
If sound quality matters at all to you, skip the Pioneer DJ VM-50. It ranks near the bottom of the 58 powered bookshelf speakers, so look higher up the list instead.
Specifications Side By Side
| IK Multimedia iLoud MTM MKII | Pioneer DJ VM-50 | |
|---|---|---|
| Price | $799.99 | $169 each |
| Ranked | #20 of 58 in Medium Size Powered Bookshelf Speakers | #44 of 58 in Medium Size Powered Bookshelf Speakers |
| Dimensions | 10.4"H x 5.1"W x 6.3"D (264.2 x 129.5 x 160 mm) | - |
| Frequency Response | 48 Hz - 28 kHz (±2dB) (Manufacturer specified) | - |
| Bass Extension (-3dB) | 52.7Hz (measured, Erin’s Audio Corner) | 61Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-10dB) | 46.3Hz (measured, Erin’s Audio Corner) | 47.3Hz (measured, Erin’s Audio Corner) |
| Inputs | XLR | XLR/TRS combo and RCA |
| Drivers | 2x 3.5" (89mm) woofers, 1" silk dome tweeter | 1" tweeter in horn; 5.25" aramid-fiber woofer |
| App | Yes (X-MONITOR speaker emulation) | - |
| Bluetooth | No | - |
| EQ | Yes (Room adjustment) | - |
| Output Power | 100w Per Speaker | - |
| Weight | 5.5 lbs / 2.5 kg (5.5 lbs) each | - |
| Max SPL | 112.5dB peak | - |
| Sensitivity | - | Not applicable (active DSP monitor) |
| Amplification | - | Class D, 30W LF + 30W HF |
| DSP | - | Four LF and four HF EQ settings |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- IK Multimedia iLoud MTM vs Edifier R1280DB
- IK Multimedia iLoud MTM vs Edifier R1280T
- IK Multimedia iLoud MTM vs Edifier MR4
- IK Multimedia iLoud MTM vs Pioneer DJ VM-50
- IK Multimedia iLoud MTM MKII vs Edifier R1280DB
Prices on this page were last checked August 24, 2026 at 6:53 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
IK Multimedia iLoud MTM MKII: $799.99 Amazon eBay
Pros: Compact MTM layout (two 3.5” midwoofers flanking a 1” tweeter) powered monitor rated at 100W per speaker with XLR input, sold as a pair with an ARC room-correction microphone included. Well-suited to nearfield desktop use, with linearity good enough for mixing or mastering. The bundled auto room-correction mic is genuinely effective - in testing it resolved specific room resonance peaks around 150Hz and 220Hz, making the midrange sound noticeably more lifelike. Back-panel switches allow desktop vs. free-field placement plus treble and bass trim. Harmonic distortion is good at a moderate 86dB output, appropriate for a speaker of this size.
Cons: Native treble tuning still runs about 3dB hot on-axis; the back-panel -3dB treble switch overcorrects, and roughly -1.5dB via external EQ works better. Vertical MTM lobing means staying within about 20-25° of the tweeter axis, or the upper-midrange to treble transition suffers significant suckout - the speaker should never be laid on its side unless the tweeter is pointed directly at the listener, or comb filtering results. Bass falls off sharply below its F3 of 51Hz (F10 45Hz), so a subwoofer is needed for anything lower. Multitone distortion rises sharply at 96dB/1m, and the reviewer recommends not exceeding about 86dB for extended listening at any distance - broadband output for the pair tops out around 94dB at 1 meter, with dynamic range essentially collapsing approaching 102dB. Horizontal directivity narrows with frequency rather than staying constant. Adding a subwoofer with an 80Hz crossover doesn’t meaningfully improve the distortion headroom, even though it does extend the low end.
Full IK Multimedia iLoud MTM MKII review and specifications →
| App | Yes (X-MONITOR speaker emulation) |
|---|---|
| Bass Extension (-10dB) | 46.3Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 52.7Hz (measured, Erin's Audio Corner) |
| Bluetooth | No |
| Dimensions | 10.4"H x 5.1"W x 6.3"D (264.2 x 129.5 x 160 mm) |
| Drivers | 2x 3.5" (89mm) woofers, 1" silk dome tweeter |
| EQ | Yes (Room adjustment) |
| Frequency Response | 48 Hz - 28 kHz (±2dB) (Manufacturer specified) |
| Inputs | XLR |
| Max SPL | 112.5dB peak |
| Output Power | 100w Per Speaker |
| Weight | 5.5 lbs / 2.5 kg (5.5 lbs) each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- IK Multimedia iLoud MTM MKII vs IK Multimedia iLoud MTM
- IK Multimedia iLoud MTM MKII vs Presonus Eris E5 XT
- IK Multimedia iLoud MTM MKII vs KRK Rokit 5 G4
- IK Multimedia iLoud MTM MKII vs JBL 705P
- IK Multimedia iLoud MTM MKII vs Airpulse A100
- IK Multimedia iLoud MTM MKII vs KEF LS50 Wireless II
- IK Multimedia iLoud MTM MKII vs Kali Audio IN-5
- IK Multimedia iLoud MTM MKII vs Vanatoo Transparent Zero Plus
- See all 39 comparisons
Pioneer DJ VM-50: $169 each Amazon eBay
Pros: Compact active monitor with 96kHz DSP, 4mm aluminum front baffle, 5.25-inch aramid woofer and constant-directivity horn. Erin measured F3 at 61Hz, low distortion at 86 and 96dB, almost no long-term compression above 50Hz and only roughly quarter-decibel dynamic nonlinearity. Four-position low- and high-EQ controls yield 16 useful voicings, while balanced TRS/XLR and RCA inputs suit studio and consumer sources.
Cons: The default axial response is not reference-flat and the upper-mid/treble directivity behavior varies with angle; correct EQ-switch selection and listening geometry matter. Bass does not reach 50Hz at reference level despite its pleasing punch, making a subwoofer useful. Output is appropriate for nearfield use rather than home-theater distance. As an internally amplified monitor, passive impedance and sensitivity measurements are not applicable.
Full Pioneer DJ VM-50 review and specifications →
| Amplification | Class D, 30W LF + 30W HF |
|---|---|
| Bass Extension (-10dB) | 47.3Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 61Hz (measured, Erin's Audio Corner) |
| DSP | Four LF and four HF EQ settings |
| Drivers | 1" tweeter in horn; 5.25" aramid-fiber woofer |
| Inputs | XLR/TRS combo and RCA |
| Sensitivity | Not applicable (active DSP monitor) |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Pioneer DJ VM-50 vs Dynaudio LYD 5
- Pioneer DJ VM-50 vs Klipsch The Fives
- Pioneer DJ VM-50 vs Edifier S1000W
- Pioneer DJ VM-50 vs Audioengine HD6
- Pioneer DJ VM-50 vs Edifier S1000MKII
- Pioneer DJ VM-50 vs Edifier R2000DB
- Pioneer DJ VM-50 vs Audioengine A5+ Classic
- Pioneer DJ VM-50 vs Kali Audio IN-UNF
- See all 30 comparisons