Short answer: the Genelec 8331A for better sound quality, the IK Multimedia iLoud MTM MKII for the lower price. The Genelec 8331A ranks #1 of 60 powered bookshelf speakers at $5750. The IK Multimedia iLoud MTM MKII ranks #20 at $799.99, $4950.01 cheaper.
What the IK Multimedia iLoud MTM MKII offers: Compact MTM layout (two 3.5” midwoofers flanking a 1” tweeter) powered monitor rated at 100W per speaker with XLR input, sold as a pair with an ARC room-correction microphone included. Well-suited to nearfield desktop use, with linearity good enough for mixing or mastering. The bundled auto room-correction mic is genuinely effective - in testing it resolved specific room resonance peaks around 150Hz and 220Hz, making the midrange sound noticeably more lifelike. Back-panel switches allow desktop vs. free-field placement plus treble and bass trim. Harmonic distortion is good at a moderate 86dB output, appropriate for a speaker of this size. Watch for: Native treble tuning still runs about 3dB hot on-axis; the back-panel -3dB treble switch overcorrects, and roughly -1.5dB via external EQ works better. Vertical MTM lobing means staying within about 20-25° of the tweeter axis, or the upper-midrange to treble transition suffers significant suckout - the speaker should never be laid on its side unless the tweeter is pointed directly at the listener, or comb filtering results. Bass falls off sharply below its F3 of 51Hz (F10 45Hz), so a subwoofer is needed for anything lower. Multitone distortion rises sharply at 96dB/1m, and the reviewer recommends not exceeding about 86dB for extended listening at any distance - broadband output for the pair tops out around 94dB at 1 meter, with dynamic range essentially collapsing approaching 102dB. Horizontal directivity narrows with frequency rather than staying constant. Adding a subwoofer with an 80Hz crossover doesn’t meaningfully improve the distortion headroom, even though it does extend the low end.
What the Genelec 8331A offers: A true compact point source: the coaxial mid/tweeter and acoustically concealed opposed woofers produce exceptionally uniform directivity, superb nearfield summation and pinpoint imaging. Erin measured F3 at 49Hz and F10 at 39Hz, heard useful 40Hz in-room extension, and reached 100dB at 3m before protection activated. Response is highly neutral, distortion is low, and GLM provides calibrated level, delay and room-response correction. The die-cast aluminum waveguide/enclosure is both structurally inert and nearly diffraction-free. Watch for: At $4,500/pair it is expensive for a monitor whose protection circuit mutes near its limit rather than allowing short-term overload; larger rooms and bass-heavy playback still benefit from a subwoofer. GLM calibration requires separate network hardware, and connectivity is studio-centric—analog/AES XLR with no consumer streaming. The compact dual racetrack woofers cannot match larger Genelec Ones for deep-bass headroom, and passive sensitivity is not applicable because all filtering and amplification are internal.
Buy the IK Multimedia iLoud MTM MKII if the price matters more than sound quality. Buy the Genelec 8331A if sound quality matters more than the price.
Specifications Side By Side
| IK Multimedia iLoud MTM MKII | Genelec 8331A | |
|---|---|---|
| Price | $799.99 | $5750 |
| Ranked | #20 of 60 in Medium Size Powered Bookshelf Speakers | #1 of 60 in Medium Size Powered Bookshelf Speakers |
| Dimensions | 10.4"H x 5.1"W x 6.3"D (264.2 x 129.5 x 160 mm) | 12"H x 7.4"W x 8.3"D (305 x 189 x 212 mm) |
| Frequency Response | 48 Hz - 28 kHz (±2dB) (Manufacturer specified) | - |
| Bass Extension (-3dB) | 52.7Hz (measured, Erin’s Audio Corner) | 49Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-10dB) | 46.3Hz (measured, Erin’s Audio Corner) | 39Hz (measured, Erin’s Audio Corner) |
| Inputs | XLR | - |
| Drivers | 2x 3.5" (89mm) woofers, 1" silk dome tweeter | Dual 130x65mm woofers; 90mm coaxial mid; 19mm tweeter |
| App | Yes (X-MONITOR speaker emulation) | - |
| Bluetooth | No | - |
| EQ | Yes (Room adjustment) | - |
| Output Power | 100w Per Speaker | - |
| Weight | 5.5 lbs / 2.5 kg (5.5 lbs) each | 14.8 lbs / 6.7kg each |
| Max SPL | 112.5dB peak | - |
| Sensitivity | - | Not applicable (active DSP loudspeaker) |
| Maximum Output | - | 100dB at 3m before protection (measured, Erin’s Audio Corner) |
| Amplification | - | 72W LF + 36W MF + 36W HF |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- Neumann KH120 MKII vs Kali Audio SM-5
- Neumann KH120 MKII vs Genelec 8330A
- JBL 705P vs Neumann KH120 MKII
- KEF LSX II LT vs Genelec 8331A
- Edifier S1000W vs Genelec 8331A
Prices on this page were last checked August 24, 2026 at 6:53 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
IK Multimedia iLoud MTM MKII: $799.99 Amazon eBay
Pros: Compact MTM layout (two 3.5” midwoofers flanking a 1” tweeter) powered monitor rated at 100W per speaker with XLR input, sold as a pair with an ARC room-correction microphone included. Well-suited to nearfield desktop use, with linearity good enough for mixing or mastering. The bundled auto room-correction mic is genuinely effective - in testing it resolved specific room resonance peaks around 150Hz and 220Hz, making the midrange sound noticeably more lifelike. Back-panel switches allow desktop vs. free-field placement plus treble and bass trim. Harmonic distortion is good at a moderate 86dB output, appropriate for a speaker of this size.
Cons: Native treble tuning still runs about 3dB hot on-axis; the back-panel -3dB treble switch overcorrects, and roughly -1.5dB via external EQ works better. Vertical MTM lobing means staying within about 20-25° of the tweeter axis, or the upper-midrange to treble transition suffers significant suckout - the speaker should never be laid on its side unless the tweeter is pointed directly at the listener, or comb filtering results. Bass falls off sharply below its F3 of 51Hz (F10 45Hz), so a subwoofer is needed for anything lower. Multitone distortion rises sharply at 96dB/1m, and the reviewer recommends not exceeding about 86dB for extended listening at any distance - broadband output for the pair tops out around 94dB at 1 meter, with dynamic range essentially collapsing approaching 102dB. Horizontal directivity narrows with frequency rather than staying constant. Adding a subwoofer with an 80Hz crossover doesn’t meaningfully improve the distortion headroom, even though it does extend the low end.
Full IK Multimedia iLoud MTM MKII review and specifications →
| App | Yes (X-MONITOR speaker emulation) |
|---|---|
| Bass Extension (-10dB) | 46.3Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 52.7Hz (measured, Erin's Audio Corner) |
| Bluetooth | No |
| Dimensions | 10.4"H x 5.1"W x 6.3"D (264.2 x 129.5 x 160 mm) |
| Drivers | 2x 3.5" (89mm) woofers, 1" silk dome tweeter |
| EQ | Yes (Room adjustment) |
| Frequency Response | 48 Hz - 28 kHz (±2dB) (Manufacturer specified) |
| Inputs | XLR |
| Max SPL | 112.5dB peak |
| Output Power | 100w Per Speaker |
| Weight | 5.5 lbs / 2.5 kg (5.5 lbs) each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- IK Multimedia iLoud MTM MKII vs IK Multimedia iLoud MTM
- IK Multimedia iLoud MTM MKII vs Presonus Eris E5 XT
- IK Multimedia iLoud MTM MKII vs KRK Rokit 5 G4
- IK Multimedia iLoud MTM MKII vs JBL 705P
- IK Multimedia iLoud MTM MKII vs Airpulse A100
- IK Multimedia iLoud MTM MKII vs KEF LS50 Wireless II
- IK Multimedia iLoud MTM MKII vs Kali Audio IN-5
- IK Multimedia iLoud MTM MKII vs Vanatoo Transparent Zero Plus
- See all 45 comparisons
Genelec 8331A: $5750 Bhphotovideo eBay
Pros: A true compact point source: the coaxial mid/tweeter and acoustically concealed opposed woofers produce exceptionally uniform directivity, superb nearfield summation and pinpoint imaging. Erin measured F3 at 49Hz and F10 at 39Hz, heard useful 40Hz in-room extension, and reached 100dB at 3m before protection activated. Response is highly neutral, distortion is low, and GLM provides calibrated level, delay and room-response correction. The die-cast aluminum waveguide/enclosure is both structurally inert and nearly diffraction-free.
Cons: At $4,500/pair it is expensive for a monitor whose protection circuit mutes near its limit rather than allowing short-term overload; larger rooms and bass-heavy playback still benefit from a subwoofer. GLM calibration requires separate network hardware, and connectivity is studio-centric—analog/AES XLR with no consumer streaming. The compact dual racetrack woofers cannot match larger Genelec Ones for deep-bass headroom, and passive sensitivity is not applicable because all filtering and amplification are internal.
Full Genelec 8331A review and specifications →
| Amplification | 72W LF + 36W MF + 36W HF |
|---|---|
| Bass Extension (-10dB) | 39Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 49Hz (measured, Erin's Audio Corner) |
| Dimensions | 12"H x 7.4"W x 8.3"D (305 x 189 x 212 mm) |
| Drivers | Dual 130x65mm woofers; 90mm coaxial mid; 19mm tweeter |
| Maximum Output | 100dB at 3m before protection (measured, Erin's Audio Corner) |
| Sensitivity | Not applicable (active DSP loudspeaker) |
| Weight | 14.8 lbs / 6.7kg each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons