Short answer: the IK Multimedia iLoud MTM MKII for better sound quality, the NHT Pro M-00 for the lower price. The IK Multimedia iLoud MTM MKII ranks #20 of 58 powered bookshelf speakers at $799.99. The NHT Pro M-00 ranks #58 at $498, $301.99 cheaper.
What the IK Multimedia iLoud MTM MKII offers: Compact MTM layout (two 3.5” midwoofers flanking a 1” tweeter) powered monitor rated at 100W per speaker with XLR input, sold as a pair with an ARC room-correction microphone included. Well-suited to nearfield desktop use, with linearity good enough for mixing or mastering. The bundled auto room-correction mic is genuinely effective - in testing it resolved specific room resonance peaks around 150Hz and 220Hz, making the midrange sound noticeably more lifelike. Back-panel switches allow desktop vs. free-field placement plus treble and bass trim. Harmonic distortion is good at a moderate 86dB output, appropriate for a speaker of this size. Watch for: Native treble tuning still runs about 3dB hot on-axis; the back-panel -3dB treble switch overcorrects, and roughly -1.5dB via external EQ works better. Vertical MTM lobing means staying within about 20-25° of the tweeter axis, or the upper-midrange to treble transition suffers significant suckout - the speaker should never be laid on its side unless the tweeter is pointed directly at the listener, or comb filtering results. Bass falls off sharply below its F3 of 51Hz (F10 45Hz), so a subwoofer is needed for anything lower. Multitone distortion rises sharply at 96dB/1m, and the reviewer recommends not exceeding about 86dB for extended listening at any distance - broadband output for the pair tops out around 94dB at 1 meter, with dynamic range essentially collapsing approaching 102dB. Horizontal directivity narrows with frequency rather than staying constant. Adding a subwoofer with an 80Hz crossover doesn’t meaningfully improve the distortion headroom, even though it does extend the low end.
What the NHT Pro M-00 offers: Cast aluminum-zinc alloy enclosure doubles as a heatsink for the built-in discrete Class AB amplifier, and both RCA and XLR/TRS inputs are provided with a near-field/far-field voicing switch. Watch for: Amir identified a critical flaw: a sudden suck-out in the upper bass frequencies that affects many commonly-used notes. Treble peaks on-axis, and vertical-axis performance is particularly problematic. In-room response turns notably bright in rooms with absorptive surfaces. Comparing directly to the JBL 305P Mark II, Amir found the NHT sounded “dead and bright” while the JBL was “balanced” with “rich and warm detail,” concluding, “I would not remotely use the NHT M-00 relative to JBL 305P Mark ii. The difference in overall fidelity and pleasantness is immense.” Long discontinued; not recommended even on the used market.
Buy the IK Multimedia iLoud MTM MKII if sound quality matters more than the price. Buy the NHT Pro M-00 if the price matters more than sound quality.
If sound quality matters at all to you, skip the NHT Pro M-00. It ranks near the bottom of the 58 powered bookshelf speakers, so look higher up the list instead.
Specifications Side By Side
| IK Multimedia iLoud MTM MKII | NHT Pro M-00 | |
|---|---|---|
| Price | $799.99 | $498 pair, discontinued (used market; originally $249 each) |
| Ranked | #20 of 58 in Medium Size Powered Bookshelf Speakers | #58 of 58 in Medium Size Powered Bookshelf Speakers |
| Dimensions | 10.4"H x 5.1"W x 6.3"D (264.2 x 129.5 x 160 mm) | 9H x 5.7W x 7.3D in |
| Frequency Response | 48 Hz - 28 kHz (±2dB) (Manufacturer specified) | - |
| Bass Extension (-3dB) | 52.7Hz (measured, Erin’s Audio Corner) | 83.3Hz (measured, Audio Science Review) |
| Bass Extension (-10dB) | 46.3Hz (measured, Erin’s Audio Corner) | 59.7Hz (measured, Audio Science Review) |
| Inputs | XLR | RCA, XLR/TRS |
| Drivers | 2x 3.5" (89mm) woofers, 1" silk dome tweeter | 1" ferrofluid-cooled fabric dome tweeter, 4.5" treated paper-cone woofer |
| App | Yes (X-MONITOR speaker emulation) | No |
| Bluetooth | No | No |
| EQ | Yes (Room adjustment) | - |
| Output Power | 100w Per Speaker | 75W RMS continuous, 150W peak (per speaker) |
| Weight | 5.5 lbs / 2.5 kg (5.5 lbs) each | 14 lbs / 6.35 kg each |
| Max SPL | 112.5dB peak | - |
| DSP | - | No |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- Vanatoo Transparent Zero Plus vs IK Multimedia iLoud MTM
- IK Multimedia iLoud MTM vs Edifier S1000MKII
- IK Multimedia iLoud MTM vs Edifier S2000MKIII
- Vanatoo Transparent Zero Plus vs IK Multimedia iLoud MTM MKII
- IK Multimedia iLoud MTM MKII vs Edifier S1000MKII
Prices on this page were last checked August 24, 2026 at 6:53 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
IK Multimedia iLoud MTM MKII: $799.99 Amazon eBay
Pros: Compact MTM layout (two 3.5” midwoofers flanking a 1” tweeter) powered monitor rated at 100W per speaker with XLR input, sold as a pair with an ARC room-correction microphone included. Well-suited to nearfield desktop use, with linearity good enough for mixing or mastering. The bundled auto room-correction mic is genuinely effective - in testing it resolved specific room resonance peaks around 150Hz and 220Hz, making the midrange sound noticeably more lifelike. Back-panel switches allow desktop vs. free-field placement plus treble and bass trim. Harmonic distortion is good at a moderate 86dB output, appropriate for a speaker of this size.
Cons: Native treble tuning still runs about 3dB hot on-axis; the back-panel -3dB treble switch overcorrects, and roughly -1.5dB via external EQ works better. Vertical MTM lobing means staying within about 20-25° of the tweeter axis, or the upper-midrange to treble transition suffers significant suckout - the speaker should never be laid on its side unless the tweeter is pointed directly at the listener, or comb filtering results. Bass falls off sharply below its F3 of 51Hz (F10 45Hz), so a subwoofer is needed for anything lower. Multitone distortion rises sharply at 96dB/1m, and the reviewer recommends not exceeding about 86dB for extended listening at any distance - broadband output for the pair tops out around 94dB at 1 meter, with dynamic range essentially collapsing approaching 102dB. Horizontal directivity narrows with frequency rather than staying constant. Adding a subwoofer with an 80Hz crossover doesn’t meaningfully improve the distortion headroom, even though it does extend the low end.
Full IK Multimedia iLoud MTM MKII review and specifications →
| App | Yes (X-MONITOR speaker emulation) |
|---|---|
| Bass Extension (-10dB) | 46.3Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 52.7Hz (measured, Erin's Audio Corner) |
| Bluetooth | No |
| Dimensions | 10.4"H x 5.1"W x 6.3"D (264.2 x 129.5 x 160 mm) |
| Drivers | 2x 3.5" (89mm) woofers, 1" silk dome tweeter |
| EQ | Yes (Room adjustment) |
| Frequency Response | 48 Hz - 28 kHz (±2dB) (Manufacturer specified) |
| Inputs | XLR |
| Max SPL | 112.5dB peak |
| Output Power | 100w Per Speaker |
| Weight | 5.5 lbs / 2.5 kg (5.5 lbs) each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- IK Multimedia iLoud MTM MKII vs IK Multimedia iLoud MTM
- IK Multimedia iLoud MTM MKII vs Presonus Eris E5 XT
- IK Multimedia iLoud MTM MKII vs KRK Rokit 5 G4
- IK Multimedia iLoud MTM MKII vs JBL 705P
- IK Multimedia iLoud MTM MKII vs Airpulse A100
- IK Multimedia iLoud MTM MKII vs KEF LS50 Wireless II
- IK Multimedia iLoud MTM MKII vs Kali Audio IN-5
- IK Multimedia iLoud MTM MKII vs Vanatoo Transparent Zero Plus
- See all 39 comparisons
NHT Pro M-00: $498 pair, discontinued (used market; originally $249 each) eBay
Pros: Cast aluminum-zinc alloy enclosure doubles as a heatsink for the built-in discrete Class AB amplifier, and both RCA and XLR/TRS inputs are provided with a near-field/far-field voicing switch.
Cons: Amir identified a critical flaw: a sudden suck-out in the upper bass frequencies that affects many commonly-used notes. Treble peaks on-axis, and vertical-axis performance is particularly problematic. In-room response turns notably bright in rooms with absorptive surfaces. Comparing directly to the JBL 305P Mark II, Amir found the NHT sounded “dead and bright” while the JBL was “balanced” with “rich and warm detail,” concluding, “I would not remotely use the NHT M-00 relative to JBL 305P Mark ii. The difference in overall fidelity and pleasantness is immense.” Long discontinued; not recommended even on the used market.
Full NHT Pro M-00 review and specifications →
| App | No |
|---|---|
| Bass Extension (-10dB) | 59.7Hz (measured, Audio Science Review) |
| Bass Extension (-3dB) | 83.3Hz (measured, Audio Science Review) |
| Bluetooth | No |
| DSP | No |
| Dimensions | 9H x 5.7W x 7.3D in |
| Drivers | 1" ferrofluid-cooled fabric dome tweeter, 4.5" treated paper-cone woofer |
| Inputs | RCA, XLR/TRS |
| Output Power | 75W RMS continuous, 150W peak (per speaker) |
| Weight | 14 lbs / 6.35 kg each |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons