Short answer: the IK Multimedia iLoud MTM MKII for better sound quality, the Neumi BS5P for the lower price. The IK Multimedia iLoud MTM MKII ranks #20 of 60 powered bookshelf speakers at $799.99. The Neumi BS5P ranks #56 at $150, $649.99 cheaper.
What the IK Multimedia iLoud MTM MKII offers: Compact MTM layout (two 3.5” midwoofers flanking a 1” tweeter) powered monitor rated at 100W per speaker with XLR input, sold as a pair with an ARC room-correction microphone included. Well-suited to nearfield desktop use, with linearity good enough for mixing or mastering. The bundled auto room-correction mic is genuinely effective - in testing it resolved specific room resonance peaks around 150Hz and 220Hz, making the midrange sound noticeably more lifelike. Back-panel switches allow desktop vs. free-field placement plus treble and bass trim. Harmonic distortion is good at a moderate 86dB output, appropriate for a speaker of this size. Watch for: Native treble tuning still runs about 3dB hot on-axis; the back-panel -3dB treble switch overcorrects, and roughly -1.5dB via external EQ works better. Vertical MTM lobing means staying within about 20-25° of the tweeter axis, or the upper-midrange to treble transition suffers significant suckout - the speaker should never be laid on its side unless the tweeter is pointed directly at the listener, or comb filtering results. Bass falls off sharply below its F3 of 51Hz (F10 45Hz), so a subwoofer is needed for anything lower. Multitone distortion rises sharply at 96dB/1m, and the reviewer recommends not exceeding about 86dB for extended listening at any distance - broadband output for the pair tops out around 94dB at 1 meter, with dynamic range essentially collapsing approaching 102dB. Horizontal directivity narrows with frequency rather than staying constant. Adding a subwoofer with an 80Hz crossover doesn’t meaningfully improve the distortion headroom, even though it does extend the low end.
What the Neumi BS5P offers: Exceptionally broad connectivity for the price: Bluetooth, optical, coaxial and RCA inputs, remote control and 75W total amplification. The 5-inch fiberglass woofer/1-inch silk-dome platform has generally useful directivity outside port resonances and therefore responds well to corrective EQ. Compact dimensions and ample nearfield volume make it practical for a desk or small room. Watch for: The original firmware Erin reviewed produces a pronounced V-curve—excess midbass and treble with recessed dialogue/midrange—and is a fidelity step backward from the passive BS5. Nearfield treble above 8kHz rises as much as 4dB relative to farfield, distortion is already substantial at 86dB, and compression becomes severe above 96dB. Port resonances further contaminate the response. Erin later measured improved firmware, but buyers must confirm revision. Passive sensitivity and impedance are not applicable.
Buy the IK Multimedia iLoud MTM MKII if sound quality matters more than the price. Buy the Neumi BS5P if the price matters more than sound quality.
If sound quality matters at all to you, skip the Neumi BS5P. It ranks near the bottom of the 60 powered bookshelf speakers, so look higher up the list instead.
Specifications Side By Side
| IK Multimedia iLoud MTM MKII | Neumi BS5P | |
|---|---|---|
| Price | $799.99 | $150/pair |
| Ranked | #20 of 60 in Medium Size Powered Bookshelf Speakers | #56 of 60 in Medium Size Powered Bookshelf Speakers |
| Dimensions | 10.4"H x 5.1"W x 6.3"D (264.2 x 129.5 x 160 mm) | - |
| Frequency Response | 48 Hz - 28 kHz (±2dB) (Manufacturer specified) | - |
| Bass Extension (-3dB) | 52.7Hz (measured, Erin’s Audio Corner) | 90.8Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-10dB) | 46.3Hz (measured, Erin’s Audio Corner) | 56.1Hz (measured, Erin’s Audio Corner) |
| Inputs | XLR | Bluetooth, optical, coaxial and RCA |
| Drivers | 2x 3.5" (89mm) woofers, 1" silk dome tweeter | 1" silk-dome tweeter; 5" fiberglass woofer |
| App | Yes (X-MONITOR speaker emulation) | - |
| Bluetooth | No | - |
| EQ | Yes (Room adjustment) | - |
| Output Power | 100w Per Speaker | - |
| Weight | 5.5 lbs / 2.5 kg (5.5 lbs) each | - |
| Max SPL | 112.5dB peak | - |
| Bass Extension | - | Erin’s response shows usable midbass but limited deep-bass headroom |
| Sensitivity | - | Not applicable (active DSP loudspeaker) |
| Power | - | 75W total |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- IK Multimedia iLoud MTM vs Edifier R1280DB
- IK Multimedia iLoud MTM vs Pioneer DJ VM-50
- IK Multimedia iLoud MTM vs Edifier R1280T
- IK Multimedia iLoud MTM MKII vs Edifier R1280DB
- IK Multimedia iLoud MTM MKII vs Pioneer DJ VM-50
Prices on this page were last checked August 24, 2026 at 6:53 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
IK Multimedia iLoud MTM MKII: $799.99 Amazon eBay
Pros: Compact MTM layout (two 3.5” midwoofers flanking a 1” tweeter) powered monitor rated at 100W per speaker with XLR input, sold as a pair with an ARC room-correction microphone included. Well-suited to nearfield desktop use, with linearity good enough for mixing or mastering. The bundled auto room-correction mic is genuinely effective - in testing it resolved specific room resonance peaks around 150Hz and 220Hz, making the midrange sound noticeably more lifelike. Back-panel switches allow desktop vs. free-field placement plus treble and bass trim. Harmonic distortion is good at a moderate 86dB output, appropriate for a speaker of this size.
Cons: Native treble tuning still runs about 3dB hot on-axis; the back-panel -3dB treble switch overcorrects, and roughly -1.5dB via external EQ works better. Vertical MTM lobing means staying within about 20-25° of the tweeter axis, or the upper-midrange to treble transition suffers significant suckout - the speaker should never be laid on its side unless the tweeter is pointed directly at the listener, or comb filtering results. Bass falls off sharply below its F3 of 51Hz (F10 45Hz), so a subwoofer is needed for anything lower. Multitone distortion rises sharply at 96dB/1m, and the reviewer recommends not exceeding about 86dB for extended listening at any distance - broadband output for the pair tops out around 94dB at 1 meter, with dynamic range essentially collapsing approaching 102dB. Horizontal directivity narrows with frequency rather than staying constant. Adding a subwoofer with an 80Hz crossover doesn’t meaningfully improve the distortion headroom, even though it does extend the low end.
Full IK Multimedia iLoud MTM MKII review and specifications →
| App | Yes (X-MONITOR speaker emulation) |
|---|---|
| Bass Extension (-10dB) | 46.3Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 52.7Hz (measured, Erin's Audio Corner) |
| Bluetooth | No |
| Dimensions | 10.4"H x 5.1"W x 6.3"D (264.2 x 129.5 x 160 mm) |
| Drivers | 2x 3.5" (89mm) woofers, 1" silk dome tweeter |
| EQ | Yes (Room adjustment) |
| Frequency Response | 48 Hz - 28 kHz (±2dB) (Manufacturer specified) |
| Inputs | XLR |
| Max SPL | 112.5dB peak |
| Output Power | 100w Per Speaker |
| Weight | 5.5 lbs / 2.5 kg (5.5 lbs) each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- IK Multimedia iLoud MTM MKII vs IK Multimedia iLoud MTM
- IK Multimedia iLoud MTM MKII vs Presonus Eris E5 XT
- IK Multimedia iLoud MTM MKII vs KRK Rokit 5 G4
- IK Multimedia iLoud MTM MKII vs JBL 705P
- IK Multimedia iLoud MTM MKII vs Airpulse A100
- IK Multimedia iLoud MTM MKII vs KEF LS50 Wireless II
- IK Multimedia iLoud MTM MKII vs Kali Audio IN-5
- IK Multimedia iLoud MTM MKII vs Vanatoo Transparent Zero Plus
- See all 45 comparisons
Neumi BS5P: $150/pair Amazon eBay
Pros: Exceptionally broad connectivity for the price: Bluetooth, optical, coaxial and RCA inputs, remote control and 75W total amplification. The 5-inch fiberglass woofer/1-inch silk-dome platform has generally useful directivity outside port resonances and therefore responds well to corrective EQ. Compact dimensions and ample nearfield volume make it practical for a desk or small room.
Cons: The original firmware Erin reviewed produces a pronounced V-curve—excess midbass and treble with recessed dialogue/midrange—and is a fidelity step backward from the passive BS5. Nearfield treble above 8kHz rises as much as 4dB relative to farfield, distortion is already substantial at 86dB, and compression becomes severe above 96dB. Port resonances further contaminate the response. Erin later measured improved firmware, but buyers must confirm revision. Passive sensitivity and impedance are not applicable.
Full Neumi BS5P review and specifications →
| Bass Extension | Erin's response shows usable midbass but limited deep-bass headroom |
|---|---|
| Bass Extension (-10dB) | 56.1Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 90.8Hz (measured, Erin's Audio Corner) |
| Drivers | 1" silk-dome tweeter; 5" fiberglass woofer |
| Inputs | Bluetooth, optical, coaxial and RCA |
| Power | 75W total |
| Sensitivity | Not applicable (active DSP loudspeaker) |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons