IK Multimedia iLoud MTM MKII vs Kali Audio IN-UNF

Last updated: August 24, 2026

Short answer: the IK Multimedia iLoud MTM MKII for better sound quality, the Kali Audio IN-UNF for the lower price. The IK Multimedia iLoud MTM MKII ranks #20 of 58 powered bookshelf speakers at $799.99. The Kali Audio IN-UNF ranks #50 at $699, $100.99 cheaper.

What the IK Multimedia iLoud MTM MKII offers: Compact MTM layout (two 3.5” midwoofers flanking a 1” tweeter) powered monitor rated at 100W per speaker with XLR input, sold as a pair with an ARC room-correction microphone included. Well-suited to nearfield desktop use, with linearity good enough for mixing or mastering. The bundled auto room-correction mic is genuinely effective - in testing it resolved specific room resonance peaks around 150Hz and 220Hz, making the midrange sound noticeably more lifelike. Back-panel switches allow desktop vs. free-field placement plus treble and bass trim. Harmonic distortion is good at a moderate 86dB output, appropriate for a speaker of this size. Watch for: Native treble tuning still runs about 3dB hot on-axis; the back-panel -3dB treble switch overcorrects, and roughly -1.5dB via external EQ works better. Vertical MTM lobing means staying within about 20-25° of the tweeter axis, or the upper-midrange to treble transition suffers significant suckout - the speaker should never be laid on its side unless the tweeter is pointed directly at the listener, or comb filtering results. Bass falls off sharply below its F3 of 51Hz (F10 45Hz), so a subwoofer is needed for anything lower. Multitone distortion rises sharply at 96dB/1m, and the reviewer recommends not exceeding about 86dB for extended listening at any distance - broadband output for the pair tops out around 94dB at 1 meter, with dynamic range essentially collapsing approaching 102dB. Horizontal directivity narrows with frequency rather than staying constant. Adding a subwoofer with an 80Hz crossover doesn’t meaningfully improve the distortion headroom, even though it does extend the low end.

What the Kali Audio IN-UNF offers: Ingenious ultra-nearfield system: a desk-mounted bass module uses two opposed 4.5-inch woofers below 280Hz, while the satellites use time-aligned 4-inch/1-inch coincident drivers. It is specifically engineered around the desk and, set up to Kali’s supplied placement template, sounded much better than it initially did to Erin; his moving-mic measurement at arm’s length closely matched the system’s predicted response. DSP provides placement, boundary and tonal trims, while USB-C, optical, 3.5mm and balanced TRS inputs cover desktop and studio sources. The round satellite enclosure avoids conventional baffle-edge diffraction, and the coaxial satellites image best aimed directly at the listener. Watch for: This is a very specialized system rather than a general desktop-speaker recommendation. The sizeable bass module must stay on the desk and prescribed satellite spacing can conflict with dual or ultrawide monitors; Erin and Joe N Tell both preferred Kali’s LP-6/IN-series alternatives for their own desks. A bump around 100-130Hz and a possible 1.2kHz diffraction feature appeared in Erin’s exploratory anechoic data, but he explicitly cautioned that those measurements do not replicate the required desk geometry. Bass falls away around 40-50Hz despite the separate bass unit. Erin did not publish comparable anechoic F3/F10, sensitivity or impedance figures because the system is designed around a fixed desk arrangement.

Buy the IK Multimedia iLoud MTM MKII if sound quality matters more than the price. Buy the Kali Audio IN-UNF if the price matters more than sound quality.

If sound quality matters at all to you, skip the Kali Audio IN-UNF. It ranks near the bottom of the 58 powered bookshelf speakers, so look higher up the list instead.

IK Multimedia iLoud MTM MKII vs Kali Audio IN-UNF

Specifications Side By Side

IK Multimedia iLoud MTM MKII Kali Audio IN-UNF
Price$799.99$699
Ranked#20 of 58 in Medium Size Powered Bookshelf Speakers#50 of 58 in Medium Size Powered Bookshelf Speakers
Dimensions10.4"H x 5.1"W x 6.3"D (264.2 x 129.5 x 160 mm)Bass module: 11.6"H x 19.4"W x 5.25"D; satellites: 6.25" diameter
Frequency Response48 Hz - 28 kHz (±2dB) (Manufacturer specified)47Hz - 21kHz +/-3dB (manufacturer specified)
Bass Extension (-3dB)52.7Hz (measured, Erin’s Audio Corner)47Hz (manufacturer specified; Erin did not publish an anechoic F3)
Bass Extension (-10dB)46.3Hz (measured, Erin’s Audio Corner)39Hz (manufacturer specified; Erin did not publish an anechoic F10)
InputsXLRUSB-C, optical, 3.5mm, balanced TRS
Drivers2x 3.5" (89mm) woofers, 1" silk dome tweeterBass module: two opposed 4.5" woofers; satellites: 4" coincident midrange with 1" textile-dome tweeter
AppYes (X-MONITOR speaker emulation)-
BluetoothNoNo
EQYes (Room adjustment)-
Output Power100w Per Speaker100W LF + 60W mid/HF per channel (continuous)
Weight5.5 lbs / 2.5 kg (5.5 lbs) each-
Max SPL112.5dB peak103dB peak at 1m (manufacturer specified)
Crossovers-280Hz LF-to-midrange; 2.8kHz midrange-to-HF
DSP-Yes (placement/boundary and tonal trims)

More useful head-to-heads from the same speaker class:

Prices on this page were last checked August 24, 2026 at 6:53 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

IK Multimedia iLoud MTM MKII: $799.99 Amazon eBay

IK Multimedia iLoud MTM MKII ranking card

Pros: Compact MTM layout (two 3.5” midwoofers flanking a 1” tweeter) powered monitor rated at 100W per speaker with XLR input, sold as a pair with an ARC room-correction microphone included. Well-suited to nearfield desktop use, with linearity good enough for mixing or mastering. The bundled auto room-correction mic is genuinely effective - in testing it resolved specific room resonance peaks around 150Hz and 220Hz, making the midrange sound noticeably more lifelike. Back-panel switches allow desktop vs. free-field placement plus treble and bass trim. Harmonic distortion is good at a moderate 86dB output, appropriate for a speaker of this size.

Cons: Native treble tuning still runs about 3dB hot on-axis; the back-panel -3dB treble switch overcorrects, and roughly -1.5dB via external EQ works better. Vertical MTM lobing means staying within about 20-25° of the tweeter axis, or the upper-midrange to treble transition suffers significant suckout - the speaker should never be laid on its side unless the tweeter is pointed directly at the listener, or comb filtering results. Bass falls off sharply below its F3 of 51Hz (F10 45Hz), so a subwoofer is needed for anything lower. Multitone distortion rises sharply at 96dB/1m, and the reviewer recommends not exceeding about 86dB for extended listening at any distance - broadband output for the pair tops out around 94dB at 1 meter, with dynamic range essentially collapsing approaching 102dB. Horizontal directivity narrows with frequency rather than staying constant. Adding a subwoofer with an 80Hz crossover doesn’t meaningfully improve the distortion headroom, even though it does extend the low end.

AppYes (X-MONITOR speaker emulation)
Bass Extension (-10dB)46.3Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)52.7Hz (measured, Erin's Audio Corner)
BluetoothNo
Dimensions10.4"H x 5.1"W x 6.3"D (264.2 x 129.5 x 160 mm)
Drivers2x 3.5" (89mm) woofers, 1" silk dome tweeter
EQYes (Room adjustment)
Frequency Response48 Hz - 28 kHz (±2dB) (Manufacturer specified)
InputsXLR
Max SPL112.5dB peak
Output Power100w Per Speaker
Weight5.5 lbs / 2.5 kg (5.5 lbs) each

Kali Audio IN-UNF: $699 Kali Audio eBay

Kali Audio IN-UNF ranking card

Pros: Ingenious ultra-nearfield system: a desk-mounted bass module uses two opposed 4.5-inch woofers below 280Hz, while the satellites use time-aligned 4-inch/1-inch coincident drivers. It is specifically engineered around the desk and, set up to Kali’s supplied placement template, sounded much better than it initially did to Erin; his moving-mic measurement at arm’s length closely matched the system’s predicted response. DSP provides placement, boundary and tonal trims, while USB-C, optical, 3.5mm and balanced TRS inputs cover desktop and studio sources. The round satellite enclosure avoids conventional baffle-edge diffraction, and the coaxial satellites image best aimed directly at the listener.

Cons: This is a very specialized system rather than a general desktop-speaker recommendation. The sizeable bass module must stay on the desk and prescribed satellite spacing can conflict with dual or ultrawide monitors; Erin and Joe N Tell both preferred Kali’s LP-6/IN-series alternatives for their own desks. A bump around 100-130Hz and a possible 1.2kHz diffraction feature appeared in Erin’s exploratory anechoic data, but he explicitly cautioned that those measurements do not replicate the required desk geometry. Bass falls away around 40-50Hz despite the separate bass unit. Erin did not publish comparable anechoic F3/F10, sensitivity or impedance figures because the system is designed around a fixed desk arrangement.

Bass Extension (-10dB)39Hz (manufacturer specified; Erin did not publish an anechoic F10)
Bass Extension (-3dB)47Hz (manufacturer specified; Erin did not publish an anechoic F3)
BluetoothNo
Crossovers280Hz LF-to-midrange; 2.8kHz midrange-to-HF
DSPYes (placement/boundary and tonal trims)
DimensionsBass module: 11.6"H x 19.4"W x 5.25"D; satellites: 6.25" diameter
DriversBass module: two opposed 4.5" woofers; satellites: 4" coincident midrange with 1" textile-dome tweeter
Frequency Response47Hz - 21kHz +/-3dB (manufacturer specified)
InputsUSB-C, optical, 3.5mm, balanced TRS
Max SPL103dB peak at 1m (manufacturer specified)
Output Power100W LF + 60W mid/HF per channel (continuous)