Short answer: the IK Multimedia iLoud MTM MKII for better sound quality, the Donner Dyna 3 for the lower price. The IK Multimedia iLoud MTM MKII ranks #20 of 60 powered bookshelf speakers at $799.99. The Donner Dyna 3 ranks #59 at $89, $710.99 cheaper.
What the IK Multimedia iLoud MTM MKII offers: Compact MTM layout (two 3.5” midwoofers flanking a 1” tweeter) powered monitor rated at 100W per speaker with XLR input, sold as a pair with an ARC room-correction microphone included. Well-suited to nearfield desktop use, with linearity good enough for mixing or mastering. The bundled auto room-correction mic is genuinely effective - in testing it resolved specific room resonance peaks around 150Hz and 220Hz, making the midrange sound noticeably more lifelike. Back-panel switches allow desktop vs. free-field placement plus treble and bass trim. Harmonic distortion is good at a moderate 86dB output, appropriate for a speaker of this size. Watch for: Native treble tuning still runs about 3dB hot on-axis; the back-panel -3dB treble switch overcorrects, and roughly -1.5dB via external EQ works better. Vertical MTM lobing means staying within about 20-25° of the tweeter axis, or the upper-midrange to treble transition suffers significant suckout - the speaker should never be laid on its side unless the tweeter is pointed directly at the listener, or comb filtering results. Bass falls off sharply below its F3 of 51Hz (F10 45Hz), so a subwoofer is needed for anything lower. Multitone distortion rises sharply at 96dB/1m, and the reviewer recommends not exceeding about 86dB for extended listening at any distance - broadband output for the pair tops out around 94dB at 1 meter, with dynamic range essentially collapsing approaching 102dB. Horizontal directivity narrows with frequency rather than staying constant. Adding a subwoofer with an 80Hz crossover doesn’t meaningfully improve the distortion headroom, even though it does extend the low end.
What the Donner Dyna 3 offers: Very inexpensive self-powered desktop pair with Bluetooth, balanced TRS, RCA and 3.5mm connectivity plus included isolation pads. The tiny 3-inch woofer/1-inch tweeter format occupies little desk space and produces usable output for close-range background listening. Watch for: Erin’s Klippel data contradicts the advertised studio-monitor accuracy: response is severely non-neutral, directivity is poorly integrated and the tonal errors are too large for a reference role. The small woofer has limited bass extension and high-level headroom, while distortion and compression rise quickly. It is an active system, so passive sensitivity and impedance do not apply; Erin did not publish comparable passive measurements. Better-measuring budget monitors are worth the additional cost.
Buy the IK Multimedia iLoud MTM MKII if sound quality matters more than the price. Buy the Donner Dyna 3 if the price matters more than sound quality.
If sound quality matters at all to you, skip the Donner Dyna 3. It ranks near the bottom of the 60 powered bookshelf speakers, so look higher up the list instead.
Specifications Side By Side
| IK Multimedia iLoud MTM MKII | Donner Dyna 3 | |
|---|---|---|
| Price | $799.99 | $89/pair |
| Ranked | #20 of 60 in Medium Size Powered Bookshelf Speakers | #59 of 60 in Medium Size Powered Bookshelf Speakers |
| Dimensions | 10.4"H x 5.1"W x 6.3"D (264.2 x 129.5 x 160 mm) | - |
| Frequency Response | 48 Hz - 28 kHz (±2dB) (Manufacturer specified) | - |
| Bass Extension (-3dB) | 52.7Hz (measured, Erin’s Audio Corner) | 85.0Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-10dB) | 46.3Hz (measured, Erin’s Audio Corner) | 66.8Hz (measured, Erin’s Audio Corner) |
| Inputs | XLR | Bluetooth, TRS, RCA and 3.5mm |
| Drivers | 2x 3.5" (89mm) woofers, 1" silk dome tweeter | 1" dome tweeter; 3" woofer |
| App | Yes (X-MONITOR speaker emulation) | - |
| Bluetooth | No | - |
| EQ | Yes (Room adjustment) | - |
| Output Power | 100w Per Speaker | - |
| Weight | 5.5 lbs / 2.5 kg (5.5 lbs) each | - |
| Max SPL | 112.5dB peak | - |
| Bass Extension | - | Limited by 3" woofer (Erin’s Audio Corner measurement) |
| Sensitivity | - | Not applicable (active loudspeaker) |
| Amplification | - | Built in |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- Audioengine A5+ Classic vs NHT Pro M-00
- IK Multimedia iLoud MTM vs Presonus Eris E5
- Presonus Eris E5 XT vs IK Multimedia iLoud MTM
- IK Multimedia iLoud MTM MKII vs Presonus Eris E5
- Presonus Eris E5 XT vs IK Multimedia iLoud MTM MKII
Prices on this page were last checked August 24, 2026 at 6:53 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
IK Multimedia iLoud MTM MKII: $799.99 Amazon eBay
Pros: Compact MTM layout (two 3.5” midwoofers flanking a 1” tweeter) powered monitor rated at 100W per speaker with XLR input, sold as a pair with an ARC room-correction microphone included. Well-suited to nearfield desktop use, with linearity good enough for mixing or mastering. The bundled auto room-correction mic is genuinely effective - in testing it resolved specific room resonance peaks around 150Hz and 220Hz, making the midrange sound noticeably more lifelike. Back-panel switches allow desktop vs. free-field placement plus treble and bass trim. Harmonic distortion is good at a moderate 86dB output, appropriate for a speaker of this size.
Cons: Native treble tuning still runs about 3dB hot on-axis; the back-panel -3dB treble switch overcorrects, and roughly -1.5dB via external EQ works better. Vertical MTM lobing means staying within about 20-25° of the tweeter axis, or the upper-midrange to treble transition suffers significant suckout - the speaker should never be laid on its side unless the tweeter is pointed directly at the listener, or comb filtering results. Bass falls off sharply below its F3 of 51Hz (F10 45Hz), so a subwoofer is needed for anything lower. Multitone distortion rises sharply at 96dB/1m, and the reviewer recommends not exceeding about 86dB for extended listening at any distance - broadband output for the pair tops out around 94dB at 1 meter, with dynamic range essentially collapsing approaching 102dB. Horizontal directivity narrows with frequency rather than staying constant. Adding a subwoofer with an 80Hz crossover doesn’t meaningfully improve the distortion headroom, even though it does extend the low end.
Full IK Multimedia iLoud MTM MKII review and specifications →
| App | Yes (X-MONITOR speaker emulation) |
|---|---|
| Bass Extension (-10dB) | 46.3Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 52.7Hz (measured, Erin's Audio Corner) |
| Bluetooth | No |
| Dimensions | 10.4"H x 5.1"W x 6.3"D (264.2 x 129.5 x 160 mm) |
| Drivers | 2x 3.5" (89mm) woofers, 1" silk dome tweeter |
| EQ | Yes (Room adjustment) |
| Frequency Response | 48 Hz - 28 kHz (±2dB) (Manufacturer specified) |
| Inputs | XLR |
| Max SPL | 112.5dB peak |
| Output Power | 100w Per Speaker |
| Weight | 5.5 lbs / 2.5 kg (5.5 lbs) each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- IK Multimedia iLoud MTM MKII vs IK Multimedia iLoud MTM
- IK Multimedia iLoud MTM MKII vs Presonus Eris E5 XT
- IK Multimedia iLoud MTM MKII vs KRK Rokit 5 G4
- IK Multimedia iLoud MTM MKII vs JBL 705P
- IK Multimedia iLoud MTM MKII vs Airpulse A100
- IK Multimedia iLoud MTM MKII vs KEF LS50 Wireless II
- IK Multimedia iLoud MTM MKII vs Kali Audio IN-5
- IK Multimedia iLoud MTM MKII vs Vanatoo Transparent Zero Plus
- See all 45 comparisons
Donner Dyna 3: $89/pair Amazon eBay
Pros: Very inexpensive self-powered desktop pair with Bluetooth, balanced TRS, RCA and 3.5mm connectivity plus included isolation pads. The tiny 3-inch woofer/1-inch tweeter format occupies little desk space and produces usable output for close-range background listening.
Cons: Erin’s Klippel data contradicts the advertised studio-monitor accuracy: response is severely non-neutral, directivity is poorly integrated and the tonal errors are too large for a reference role. The small woofer has limited bass extension and high-level headroom, while distortion and compression rise quickly. It is an active system, so passive sensitivity and impedance do not apply; Erin did not publish comparable passive measurements. Better-measuring budget monitors are worth the additional cost.
Full Donner Dyna 3 review and specifications →
| Amplification | Built in |
|---|---|
| Bass Extension | Limited by 3" woofer (Erin's Audio Corner measurement) |
| Bass Extension (-10dB) | 66.8Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 85.0Hz (measured, Erin's Audio Corner) |
| Drivers | 1" dome tweeter; 3" woofer |
| Inputs | Bluetooth, TRS, RCA and 3.5mm |
| Sensitivity | Not applicable (active loudspeaker) |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons