GR-Research X-LS Encore vs MoFi SourcePoint 10

Last updated: August 9, 2026

Short answer: the MoFi SourcePoint 10 for the higher ranking, the GR-Research X-LS Encore for the lower price. The MoFi SourcePoint 10 ranks #8 of 47 bookshelf speakers at $3500. The GR-Research X-LS Encore ranks #28 at $1300, $2200 cheaper.

The case for the GR-Research X-LS Encore: An amazing value, especially if you managed to snag one of these built by AV123 in the early 2000s for $200-300. CEA2034 spinorama shows. The catch: A slight depression in the upper bass and some peaking in the lower bass shows up on-axis.

What the MoFi SourcePoint 10 gets right: Andrew Jones-designed concentric/coincident driver delivers best-in-class sound power and early-reflections directivity in the reviewer’s. The catch: Like virtually all coincident designs, sounds notably bright pointed directly on-axis due to a deliberate treble lift (meant to compensate.

Buy the GR-Research X-LS Encore if the price matters more than the ranking. Buy the MoFi SourcePoint 10 if the ranking matters more than the price.

Specifications Side By Side

GR-Research X-LS Encore MoFi SourcePoint 10
Price$1300$3500
Ranked#28 of 47 in Large Size Bookshelf Speakers#8 of 47 in Large Size Bookshelf Speakers
Bass Extension (-10dB)44Hz38Hz
Bass Extension (-3dB)64Hz56Hz
Dimensions13.5"H x 8.5"W x 12.125"D (342.9 x 215.9 x 308 mm)22.5"H x 14.5"W x 16.6"D (571.5 x 368.3 x 421.6 mm)
Impedance8 ohms8 ohms
Sensitivity87dB88dB
Drivers6.5" Peerless M-165 paper composite cone, non-resonant polymer frame woofer, 1" Peerless India T26SG tweeter10" Paper-pulp Cone woofer, 1.25-inch soft-dome tweeter
Weight17 lbs / 7.7 kg each46.3 lbs / 21.0 kg each
Woofer CabinetPortedRear ported

The Two Speakers In Full

GR-Research X-LS Encore: $1300 Gr-research

GR-Research X-LS Encore ranking card

Pros: An amazing value, especially if you managed to snag one of these built by AV123 in the early 2000s for $200-300. CEA2034 spinorama shows a generally flat on-axis response, especially in the listening window. Predicted in-room response is generally smooth and on-target. Distortion at 86dB SPL/1m is pretty clean above 200Hz.

Cons: A slight depression in the upper bass and some peaking in the lower bass shows up on-axis, along with directivity error in the crossover region. Vertical directivity requires staying within about 20 degrees of the tweeter axis. At 96dB SPL/1m distortion becomes “rather unhappy,” with bass distortion, a possible woofer issue around 2kHz, and a tweeter problem above 7kHz. As a DIY kit, it requires building the cabinet and crossover yourself.

Bass Extension (-10dB)44Hz
Bass Extension (-3dB)64Hz
Dimensions13.5"H x 8.5"W x 12.125"D (342.9 x 215.9 x 308 mm)
Drivers6.5" Peerless M-165 paper composite cone, non-resonant polymer frame woofer, 1" Peerless India T26SG tweeter
Impedance8 ohms
Sensitivity87dB
Weight17 lbs / 7.7 kg each
Woofer CabinetPorted

MoFi SourcePoint 10: $3500 Crutchfield

MoFi SourcePoint 10 ranking card

Pros: Andrew Jones-designed concentric/coincident driver delivers best-in-class sound power and early-reflections directivity in the reviewer’s testing - a genuine “point source” design. Vertical and horizontal radiation patterns closely match each other (about ±50° horizontal, ±30-40° vertical), a hallmark benefit of a well-executed concentric driver. Distortion stays low - under 1% above 100Hz at 86dB, and under 3% up to 100Hz even at 96dB, better than the reviewer expected from a low-excursion waveguide-loaded woofer. Surprisingly strong dynamic capability with little audible compression at both low and high volume. Widely spaced (about 11 feet apart) with roughly 15° of toe-out produced a huge, expansive soundstage without significant loss of imaging precision. Solidly built cabinet (about 40 lbs, heavily braced) minimizes cabinet resonance.

Cons: Like virtually all coincident designs, sounds notably bright pointed directly on-axis due to a deliberate treble lift (meant to compensate for the 28mm tweeter’s earlier beaming versus a typical 25mm/1” tweeter) combined with a diffraction dip/peak from the waveguide edge; needs about 15° of toe-out to sound neutral, and even then benefits from an extra 1-2dB of treble EQ. Toeing out further (to 30°) flattens the treble further but introduces a dip in the midrange-to-tweeter crossover region - there’s no single toe-out angle that fixes everything at once. F3 of 56Hz and F10 of 38Hz (about 40Hz in-room) mean genuine deep bass is limited; the reviewer would pair it with a sealed 10” or 12” subwoofer for regular daily listening. Bass extension and cabinet placement trade off against midrange cleanliness: placing it close to a wall for more bass risks a wall-bounce suckout in the midrange (roughly 200-500Hz depending on distance). Not perfectly time-aligned between tweeter and woofer (about 0.4ms delta), an inherent limitation of passive coincident drivers versus actively time-corrected designs. Some resonances appear in measurements, likely port-related. Minimum impedance around 6.4 ohms with EPDR near 3 ohms, so the reviewer recommends sticking with a 4-ohm-rated amplifier to be safe.

Bass Extension (-10dB)38Hz
Bass Extension (-3dB)56Hz
Dimensions22.5"H x 14.5"W x 16.6"D (571.5 x 368.3 x 421.6 mm)
Drivers10" Paper-pulp Cone woofer, 1.25-inch soft-dome tweeter
Impedance8 ohms
Sensitivity88dB
Weight46.3 lbs / 21.0 kg each
Woofer CabinetRear ported

As an Amazon Associate I earn from qualifying purchases.

Product prices and availability were last checked August 9, 2026 at 6:57 AM UTC and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.