Genelec 8020D vs Audioengine A5+ Classic

Last updated: August 24, 2026

Short answer: the Genelec 8020D for better sound quality, the Audioengine A5+ Classic for the lower price. The Genelec 8020D ranks #6 of 58 powered bookshelf speakers at $1100. The Audioengine A5+ Classic ranks #38 at $399, $701 cheaper.

What the Genelec 8020D offers: Klippel-based spinorama measurements show a flat, well-behaved on-axis response from about 60Hz to 10kHz, with listening-window and early-reflections curves tracking closely together - a sign of well-controlled directivity. Horizontal directivity holds tight out to about ±30 degrees before starting to narrow. Applying EQ correction visibly closes the gap between the on-axis and predicted in-room curves, raising the calculated on-axis preference score from 5.4 to 6.4 and the in-room score from 5.6 to 6.6 - a straightforward, worthwhile tuning target for anyone using it with room correction. Watch for: Sound power rolls off starting around 500Hz-1kHz as the small 4.1” woofer/tweeter pair begins to beam, a typical trait of small nearfield monitors at this price. Off-axis response (measured out to 90 degrees) narrows noticeably above 1kHz, so off-center listening loses top-end energy. High price for the driver size.

What the Audioengine A5+ Classic offers: CEA2034 spinorama shows a reasonably flat response outside of the upper bass. Internal Class AB amplification (50W RMS, 75W peak) with a linear power supply drives a 5” Kevlar woofer and 0.75” tweeter. Watch for: A valley in the upper bass (200-400Hz) recesses that range, and a distortion peak shows up around 800-900Hz even at 86dB SPL. Off-axis response doesn’t track the on-axis curve well through the crossover, suggesting the waveguide isn’t fully optimized. Resonances appear at 900Hz and 4.4kHz.

Buy the Genelec 8020D if sound quality matters more than the price. Buy the Audioengine A5+ Classic if the price matters more than sound quality.

Genelec 8020D vs Audioengine A5+ Classic

Specifications Side By Side

Genelec 8020D Audioengine A5+ Classic
Price$1100$399.00
Ranked#6 of 58 in Medium Size Powered Bookshelf Speakers#38 of 58 in Medium Size Powered Bookshelf Speakers
Dimensions9.5"H x 5.8"W x 5.6"D (241.3 x 147.3 x 142.2 mm)10.9"H x 7.2"W x 9.7"D (276.2 x 182.6 x 247.6 mm)
Frequency Response56 Hz - 25 kHz (-6 dB) (Manufacturer specified)50Hz - 22kHz (+/-1.5dB) (Manufacturer specified)
InputsXLR-
Weight7.1 lbs / 3.2 kg each15.4 lbs / 7 kg (left/powered), 9.7 lbs / 4.4 kg (right)
Drivers4.1" woofer, 0.75" metal dome tweeter5" Kevlar woofer, 0.75" silk dome tweeter
AppNoNo
Bass Extension (-10dB)50Hz (measured, Audio Science Review)50Hz (measured, Audio Science Review)
Bass Extension (-3dB)56Hz (measured, Audio Science Review)68Hz (measured, Audio Science Review)
BluetoothNo-
EQYes (Bass tilt, desk proximity)No
Max SPL103dB @ 1m-
Output Power100W (50W woofer + 50W tweeter)50W RMS / 75W peak
DSP-No

More useful head-to-heads from the same speaker class:

Prices on this page were last checked August 24, 2026 at 6:53 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Genelec 8020D: $1100 Bhphotovideo eBay

Genelec 8020D ranking card

Pros: Klippel-based spinorama measurements show a flat, well-behaved on-axis response from about 60Hz to 10kHz, with listening-window and early-reflections curves tracking closely together - a sign of well-controlled directivity. Horizontal directivity holds tight out to about ±30 degrees before starting to narrow. Applying EQ correction visibly closes the gap between the on-axis and predicted in-room curves, raising the calculated on-axis preference score from 5.4 to 6.4 and the in-room score from 5.6 to 6.6 - a straightforward, worthwhile tuning target for anyone using it with room correction.

Cons: Sound power rolls off starting around 500Hz-1kHz as the small 4.1” woofer/tweeter pair begins to beam, a typical trait of small nearfield monitors at this price. Off-axis response (measured out to 90 degrees) narrows noticeably above 1kHz, so off-center listening loses top-end energy. High price for the driver size.

AppNo
Bass Extension (-10dB)50Hz (measured, Audio Science Review)
Bass Extension (-3dB)56Hz (measured, Audio Science Review)
BluetoothNo
Dimensions9.5"H x 5.8"W x 5.6"D (241.3 x 147.3 x 142.2 mm)
Drivers4.1" woofer, 0.75" metal dome tweeter
EQYes (Bass tilt, desk proximity)
Frequency Response56 Hz - 25 kHz (-6 dB) (Manufacturer specified)
InputsXLR
Max SPL103dB @ 1m
Output Power100W (50W woofer + 50W tweeter)
Weight7.1 lbs / 3.2 kg each

Audioengine A5+ Classic: $399.00 Amazon Bhphotovideo eBay

Audioengine A5+ Classic ranking card

Pros: CEA2034 spinorama shows a reasonably flat response outside of the upper bass. Internal Class AB amplification (50W RMS, 75W peak) with a linear power supply drives a 5” Kevlar woofer and 0.75” tweeter.

Cons: A valley in the upper bass (200-400Hz) recesses that range, and a distortion peak shows up around 800-900Hz even at 86dB SPL. Off-axis response doesn’t track the on-axis curve well through the crossover, suggesting the waveguide isn’t fully optimized. Resonances appear at 900Hz and 4.4kHz.

AppNo
Bass Extension (-10dB)50Hz (measured, Audio Science Review)
Bass Extension (-3dB)68Hz (measured, Audio Science Review)
DSPNo
Dimensions10.9"H x 7.2"W x 9.7"D (276.2 x 182.6 x 247.6 mm)
Drivers5" Kevlar woofer, 0.75" silk dome tweeter
EQNo
Frequency Response50Hz - 22kHz (+/-1.5dB) (Manufacturer specified)
Output Power50W RMS / 75W peak
Weight15.4 lbs / 7 kg (left/powered), 9.7 lbs / 4.4 kg (right)