Short answer: choose between the Electro-Voice MFX-12MC and RCF ART 732-A MK4 for the deployment, not from the automatic ranking alone. Their driver format, power requirements, coverage, bass reach, output capability, and control features determine which is the more practical PA for a particular room or system.
The case for the Electro-Voice MFX-12MC. The coaxial 12-inch design provides compact 60° x 40° coverage and reaches a claimed 135dB peak with the recommended amplification. Medium-quality vendor data returns a 3.78 ideal-subwoofer preference score.
The case for the RCF ART 732-A MK4. Its large 3-inch compression-driver voice coil, 131dB claimed peak and roughly 53Hz measured extension give it useful vocal headroom and more bass reach than the 712 MK4. The 17.8kg enclosure remains easy to carry.
Important trade-offs. This is not self-powered: it requires an external amplifier and can be run passive or externally bi-amplified, so it is less convenient than every conventional powered cabinet here. Measured bass extension is about 75Hz and the narrow pattern is aimed primarily at stage-monitor and fill use. The low-quality vendor data is truncated and does not yield a preference score. It is discontinued, lacks modern remote control and is eclipsed by the better-supported ART 732-A MK5 and current 9-series models.
Buy the Electro-Voice MFX-12MC when its stated format, coverage, and system features fit the job better.
Buy the RCF ART 732-A MK4 when its stated output, control, and deployment strengths better match the system.
Neither of these is a sound-quality pick. Look higher up the 37 12-inch two-way powered pa speakers if that is what you are optimizing for.
Specifications Side By Side
| Electro-Voice MFX-12MC | RCF ART 732-A MK4 | |
|---|---|---|
| Price | $2,805.33 | $1,049.00 |
| Ranked | #32 of 37 in 12-Inch Two-Way Powered PA Speakers | #34 of 37 in 12-Inch Two-Way Powered PA Speakers |
| Configuration | Passive or externally bi-amplified 2-way coaxial PA monitor | Active 2-way bass-reflex PA speaker |
| Drivers | 12" coaxial LF/MF driver, 3" HF compression driver | 12" woofer, 1.4" compression driver with 3" voice coil |
| Frequency Response | 62Hz - 18kHz (-3dB, manufacturer specified); 50Hz - 19kHz (-10dB) | 50Hz - 20kHz (manufacturer specified) |
| Dimensions | 19.7"H x 16.5"W x 11.7"D (500 x 420 x 298 mm) | 25.1"H x 15.2"W x 14.3"D (637 x 387 x 363 mm) |
| Power Handling | 450W continuous / 3,000W peak (manufacturer specified) | - |
| Amplifier Power | Passive/bi-amp speaker; use external amplification within the 450W continuous / 3,000W peak handling rating | 1,400W peak / 700W RMS (1,000W LF + 400W HF peak, manufacturer specified) |
| Cabinet Material | 12-18mm Baltic birch plywood with EVCoat finish | Polypropylene composite |
| Rigging | Four M10 suspension points; integrated 35mm pole cup | Two M10 fly points; pole mount |
| Bass Extension (-3dB) | 82.5Hz (measured, vendor Spinorama data) | 53Hz (measured, vendor Spinorama data) |
| Coverage | 60° x 40°, rotatable | 90° x 60° |
| Maximum SPL | 135dB peak with recommended amplification | 131dB peak (manufacturer specified) |
| Inputs | NL4 speakON input and link | XLR/TRS combo input and XLR link |
| DSP | Requires external amplifier/DSP settings | Yes, FiRPHASE, EQ, limiting and protection |
| Bluetooth | No | No |
| Weight | 41.9 lbs / 19 kg | 39.2 lbs / 17.8 kg |
| Crossover Frequency | - | 700Hz (manufacturer specified) |
Related Speaker Comparisons
A few more comparisons worth a look in the same class:
- RCF ART 712-A MK4 vs Audiofocus VENU 12a
- PreSonus CDL12 vs Amate Audio X12CLA
- Amate Audio X12CLA vs RCF ART 712-A MK4
- RCF ART 732-A MK4 vs Audiofocus VENU 12a
- PreSonus CDL12 vs Electro-Voice MFX-12MC
Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Electro-Voice MFX-12MC: $2,805.33 Amazon B&H Photo Video eBay
Pros: The coaxial 12-inch design provides compact 60° x 40° coverage and reaches a claimed 135dB peak with the recommended amplification. Medium-quality vendor data returns a 3.78 ideal-subwoofer preference score.
Cons: This is not self-powered: it requires an external amplifier and can be run passive or externally bi-amplified, so it is less convenient than every conventional powered cabinet here. Measured bass extension is about 75Hz and the narrow pattern is aimed primarily at stage-monitor and fill use.
Full Electro-Voice MFX-12MC review and specifications →
| Amplifier Power | Passive/bi-amp speaker; use external amplification within the 450W continuous / 3,000W peak handling rating |
|---|---|
| Bass Extension (-3dB) | 82.5Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | 12-18mm Baltic birch plywood with EVCoat finish |
| Configuration | Passive or externally bi-amplified 2-way coaxial PA monitor |
| Coverage | 60° x 40°, rotatable |
| DSP | Requires external amplifier/DSP settings |
| Dimensions | 19.7"H x 16.5"W x 11.7"D (500 x 420 x 298 mm) |
| Drivers | 12" coaxial LF/MF driver, 3" HF compression driver |
| Frequency Response | 62Hz - 18kHz (-3dB, manufacturer specified); 50Hz - 19kHz (-10dB) |
| Inputs | NL4 speakON input and link |
| Maximum SPL | 135dB peak with recommended amplification |
| Power Handling | 450W continuous / 3,000W peak (manufacturer specified) |
| Rigging | Four M10 suspension points; integrated 35mm pole cup |
| Weight | 41.9 lbs / 19 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
RCF ART 732-A MK4: $1,049.00 B&H Photo Video Guitar Center eBay
Pros: Its large 3-inch compression-driver voice coil, 131dB claimed peak and roughly 53Hz measured extension give it useful vocal headroom and more bass reach than the 712 MK4. The 17.8kg enclosure remains easy to carry.
Cons: The low-quality vendor data is truncated and does not yield a preference score. It is discontinued, lacks modern remote control and is eclipsed by the better-supported ART 732-A MK5 and current 9-series models.
Full RCF ART 732-A MK4 review and specifications →
| Amplifier Power | 1,400W peak / 700W RMS (1,000W LF + 400W HF peak, manufacturer specified) |
|---|---|
| Bass Extension (-3dB) | 53Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Polypropylene composite |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 90° x 60° |
| Crossover Frequency | 700Hz (manufacturer specified) |
| DSP | Yes, FiRPHASE, EQ, limiting and protection |
| Dimensions | 25.1"H x 15.2"W x 14.3"D (637 x 387 x 363 mm) |
| Drivers | 12" woofer, 1.4" compression driver with 3" voice coil |
| Frequency Response | 50Hz - 20kHz (manufacturer specified) |
| Inputs | XLR/TRS combo input and XLR link |
| Maximum SPL | 131dB peak (manufacturer specified) |
| Rigging | Two M10 fly points; pole mount |
| Weight | 39.2 lbs / 17.8 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons