Edifier MR4 vs Neumi BS5P

Last updated: August 25, 2026

Short answer: the Edifier MR4. It ranks #31 of 64 powered bookshelf speakers by sound quality at $129.97; the Neumi BS5P ranks #60 and costs $150, so there is not much of a tradeoff to weigh.

What the Edifier MR4 offers: More balanced than the R1280DB. The value king. Impressively deep, flat bass down to 70Hz for such a small speaker, and its waveguide gives it unusually wide, consistent horizontal directivity for the price. Balanced XLR/TRS inputs are rare this cheap. Watch for: No Bluetooth unlike other Edifier models. Distortion climbs sharply above 86dB SPL, breaking into audible squealing near 96dB, and there’s a dip in the lower treble that needs a bit of EQ or the rear HF control to smooth out. Playback volume is limited with bass-heavy material - pushing it loud brings audible clicking/static.

What the Neumi BS5P offers: Exceptionally broad connectivity for the price: Bluetooth, optical, coaxial and RCA inputs, remote control and 75W total amplification. The 5-inch fiberglass woofer/1-inch silk-dome platform has generally useful directivity outside port resonances and therefore responds well to corrective EQ. Compact dimensions and ample nearfield volume make it practical for a desk or small room. Watch for: The original firmware Erin reviewed produces a pronounced V-curve—excess midbass and treble with recessed dialogue/midrange—and is a fidelity step backward from the passive BS5. Nearfield treble above 8kHz rises as much as 4dB relative to farfield, distortion is already substantial at 86dB, and compression becomes severe above 96dB. Port resonances further contaminate the response. Erin later measured improved firmware, but buyers must confirm revision. Passive sensitivity and impedance are not applicable.

Buy the Edifier MR4. It ranks higher for sound quality than the Neumi BS5P and costs less, so there is no real case for the other one.

If sound quality matters at all to you, skip the Neumi BS5P. It ranks near the bottom of the 64 powered bookshelf speakers, so look higher up the list instead.

Edifier MR4 vs Neumi BS5P

Specifications Side By Side

Edifier MR4 Neumi BS5P
Price$129.97$150/pair
Ranked#31 of 64 in Medium Size Powered Bookshelf Speakers#60 of 64 in Medium Size Powered Bookshelf Speakers
Dimensions9"H x 5.5"W x 7.6"D (228.6 x 139.7 x 193 mm)-
Frequency Response60 Hz-20 kHz (-3dB) (Manufacturer specified)-
InputsTRS Balanced, RCA, AuxBluetooth, optical, coaxial and RCA
OutputsHeadphone-
Weight9.9 lbs / 4.5 kg-
Drivers4" (102mm) woofer1" silk-dome tweeter; 5" fiberglass woofer
AppNo-
BluetoothNo-
EQNo-
Output Power42w RMS Per Speaker-
Bass Extension (-3dB)109Hz (measured, Erin’s Audio Corner)90.8Hz (measured, Erin’s Audio Corner)
Bass Extension (-10dB)58Hz (measured, Erin’s Audio Corner)56.1Hz (measured, Erin’s Audio Corner)
Sensitivity78dB (measured at 0.3V/1m, Erin’s Audio Corner)Not applicable (active DSP loudspeaker)
Bass Extension-Erin’s response shows usable midbass but limited deep-bass headroom
Power-75W total

More useful head-to-heads from the same speaker class:

Prices on this page were last checked August 25, 2026 at 6:19 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Edifier MR4: $129.97 Amazon eBay

Edifier MR4 ranking card

Pros: More balanced than the R1280DB. The value king. Impressively deep, flat bass down to 70Hz for such a small speaker, and its waveguide gives it unusually wide, consistent horizontal directivity for the price. Balanced XLR/TRS inputs are rare this cheap.

Cons: No Bluetooth unlike other Edifier models. Distortion climbs sharply above 86dB SPL, breaking into audible squealing near 96dB, and there’s a dip in the lower treble that needs a bit of EQ or the rear HF control to smooth out. Playback volume is limited with bass-heavy material - pushing it loud brings audible clicking/static.

AppNo
Bass Extension (-10dB)58Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)109Hz (measured, Erin's Audio Corner)
BluetoothNo
Dimensions9"H x 5.5"W x 7.6"D (228.6 x 139.7 x 193 mm)
Drivers4" (102mm) woofer
EQNo
Frequency Response60 Hz-20 kHz (-3dB) (Manufacturer specified)
InputsTRS Balanced, RCA, Aux
Output Power42w RMS Per Speaker
OutputsHeadphone
Sensitivity78dB (measured at 0.3V/1m, Erin's Audio Corner)
Weight9.9 lbs / 4.5 kg

Neumi BS5P: $150/pair Amazon eBay

Neumi BS5P ranking card

Pros: Exceptionally broad connectivity for the price: Bluetooth, optical, coaxial and RCA inputs, remote control and 75W total amplification. The 5-inch fiberglass woofer/1-inch silk-dome platform has generally useful directivity outside port resonances and therefore responds well to corrective EQ. Compact dimensions and ample nearfield volume make it practical for a desk or small room.

Cons: The original firmware Erin reviewed produces a pronounced V-curve—excess midbass and treble with recessed dialogue/midrange—and is a fidelity step backward from the passive BS5. Nearfield treble above 8kHz rises as much as 4dB relative to farfield, distortion is already substantial at 86dB, and compression becomes severe above 96dB. Port resonances further contaminate the response. Erin later measured improved firmware, but buyers must confirm revision. Passive sensitivity and impedance are not applicable.

Bass ExtensionErin's response shows usable midbass but limited deep-bass headroom
Bass Extension (-10dB)56.1Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)90.8Hz (measured, Erin's Audio Corner)
Drivers1" silk-dome tweeter; 5" fiberglass woofer
InputsBluetooth, optical, coaxial and RCA
Power75W total
SensitivityNot applicable (active DSP loudspeaker)