Short answer: the Dynaudio Emit 50. It ranks #70 of 139 floorstanding speakers by sound quality, rated 4.2/5, at $1,274.25; the Dynaudio Emit 30 ranks #90, rated 3.9/5, at $1,274.25. Close enough in price that the sound-quality gap is the deciding factor.
The Dynaudio Emit 50 is the better-sounding option. Full 3-way floorstander in the Emit lineup with dual 7-inch MSP (Magnesium Silicate Polymer) woofers, a dedicated 6-inch MSP midrange, and a 1.1-inch Cerotar soft dome tweeter with Hexis inner dome. Watch for: Rating estimated based on Emit series sibling testing.
Why pick the Dynaudio Emit 30: A 2.5-way floorstander: two 5.25” mid-woofers paired with a roughly 1” dome tweeter, driven through dual rear bass-reflex ports. Watch for: A dip and inconsistency in the lower-treble presence region (roughly 2-5kHz) makes the top end sound uneven (sometimes soft, sometimes forward) depending on the specific instrument or frequency being reproduced; male vocals can lack presence and cymbals can lack sizzle as a result.
Buy the Dynaudio Emit 50. It is rated higher for sound quality than the Dynaudio Emit 30 at the same price, so only choose the other one for a particular feature it does better.
Still deciding? The full Passive Home rankings cover every ranked option.
Specifications Side By Side
| Dynaudio Emit 50 | Dynaudio Emit 30 | |
|---|---|---|
| Price | $1,274.25 per pair | $1,274.25 per pair |
| Ranked | #70 of 139 in Large Size Floorstanding Speakers | #90 of 139 in Large Size Floorstanding Speakers |
| Drivers | 1.1” (28mm) Cerotar soft dome tweeter with Hexis, 6” (150mm) MSP midrange, 2 x 7” (180mm) MSP woofers | Dual 5.25” mid-woofers, 1” soft dome tweeter |
| Frequency Response | 33Hz - 25kHz (±3dB, manufacturer specified) | 44Hz - 25kHz (±3dB, manufacturer specified) |
| Sensitivity | 86dB (2.83V/1m, manufacturer specified) | 87dB |
| Impedance | 4 ohms nominal (manufacturer specified) | 4 ohms |
| Bass Extension (-3dB) | 33Hz (manufacturer specified) | 44Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-6dB) | 28Hz (manufacturer specified) | - |
| Dimensions | 44.9”H x 8.1”W x 12.3”D (1140 x 205 x 312 mm) | 35.4”H x 6.7”W x 10.7”D (900.0 x 170.0 x 272.0 mm) |
| Weight | 57.2 lbs (25.96 kg) each | 34.2 lbs (15.5 kg) |
| DIY Kit | No | No |
| Bass Extension (-10dB) | - | 36Hz (measured, Erin’s Audio Corner) |
| Woofer Cabinet | - | ported, rear (dual) |
| Power Handling | - | 180W (IEC rated) |
| Country | - | Denmark |
| Spinorama Preference Score | - | 3.84 |
| Spinorama Preference Score with Perfect Sub | - | 5.69 |
Related Speaker Comparisons
How Dynaudio Emit 50 compares with other leading options:
- Dynaudio Emit 30 vs Bose 901 Series V
- ELAC Debut 3.0 DF63 vs Dynaudio Emit 30
- Dynaudio Emit 30 vs Magnepan LRS+
- Dynaudio Emit 30 vs JBL Stage 2 280F
- Klipsch RP-5000F II vs Dynaudio Emit 30
Prices on this page were last checked October 5, 2026 at 10:21 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Dynaudio Emit 50: $1,274.25 per pair Estimated Amazon eBay
Smaller models: the Dynaudio Emit 30 (ranked lower, rated 3.9/5), the Dynaudio Emit 20 (rated 3.6/5) and the Dynaudio Emit 10 (estimated 3.2/5).
Pros: Full 3-way floorstander in the Emit lineup with dual 7-inch MSP (Magnesium Silicate Polymer) woofers, a dedicated 6-inch MSP midrange, and a 1.1-inch Cerotar soft dome tweeter with Hexis inner dome. Produces deep low-frequency authority down to 33Hz (-3dB) and natural, fatigue-free vocal rendering.
Cons: Rating estimated based on Emit series sibling testing. 4-ohm nominal impedance and 86dB sensitivity require high-current amplification to handle heavy bass transients.
Full Dynaudio Emit 50 review and specifications →
| Bass Extension (-3dB) | 33Hz (manufacturer specified) |
|---|---|
| Bass Extension (-6dB) | 28Hz (manufacturer specified) |
| DIY Kit | No |
| Dimensions | 44.9”H x 8.1”W x 12.3”D (1140 x 205 x 312 mm) |
| Drivers | 1.1” (28mm) Cerotar soft dome tweeter with Hexis, 6” (150mm) MSP midrange, 2 x 7” (180mm) MSP woofers |
| Frequency Response | 33Hz - 25kHz (±3dB, manufacturer specified) |
| Impedance | 4 ohms nominal (manufacturer specified) |
| Sensitivity | 86dB (2.83V/1m, manufacturer specified) |
| Weight | 57.2 lbs (25.96 kg) each |
- Links
- Reviews, Comparisons and Sound Samples
- No independent measurement review is linked for this model; it is ranked from hands-on listening and comparison against similarly priced speakers.
- Head-to-Head Comparisons
Dynaudio Emit 30: $1,274.25 per pair Amazon eBay
Smaller models: the Dynaudio Emit 20 (rated 3.6/5) and the Dynaudio Emit 10 (estimated 3.2/5).
Larger model: the Dynaudio Emit 50 (ranked higher, estimated 4.2/5).
Pros: A 2.5-way floorstander: two 5.25” mid-woofers paired with a roughly 1” dome tweeter, driven through dual rear bass-reflex ports. The two woofers hand off at staggered crossover points (around 1kHz and 3.5kHz) rather than sharing one, which avoids the acoustic lobing a shared crossover point would cause between the tweeter and the lower woofer, and adds a few dB of sensitivity in the process. Genuinely deep bass for a speaker around this price: measured F3 near 44Hz and extends audibly down to about 40Hz in-room without much difficulty. Harmonic distortion measures clean and low at both 86dB and 96dB SPL/1m. Good CTA-2034 sound power and uniform directivity mean the speaker takes EQ correction well if a listener wants to dial in its one tonal weak point. Dynamic range and compression performance are strong overall, with only a minor, high-Q compression artifact tied to a cone-edge resonance that’s unlikely to be audible. Wide, consistent horizontal dispersion around ±70° with just a small ~10° narrowing between 1-3kHz, and a reasonably forgiving ±20° vertical window centered on the tweeter axis. Measured bass extension of 44Hz (-3dB).
Cons: A dip and inconsistency in the lower-treble presence region (roughly 2-5kHz) makes the top end sound uneven (sometimes soft, sometimes forward) depending on the specific instrument or frequency being reproduced; male vocals can lack presence and cymbals can lack sizzle as a result. A cone-edge surround resonance shows up around 1-1.3kHz in burst-decay measurements (a trait the reviewer has also seen on other Dynaudio models) and lines up with elevated multitone distortion across roughly 600Hz-1.5kHz. An enclosure resonance appears around 350Hz in the impedance curve. Placed too close to a rear wall, the dual ports make the bass noticeably boomy: pulling the speaker out is needed to keep the low end from overloading the room. Fully resolving the top-end inconsistency needs a modest EQ correction (roughly +2dB with a Q of about 1, centered 3-6kHz), so out-of-the-box tonal accuracy in that band isn’t quite class-leading despite otherwise strong measured performance.
Full Dynaudio Emit 30 review and specifications →
| Bass Extension (-10dB) | 36Hz (measured, Erin’s Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 44Hz (measured, Erin’s Audio Corner) |
| Country | Denmark |
| DIY Kit | No |
| Dimensions | 35.4”H x 6.7”W x 10.7”D (900.0 x 170.0 x 272.0 mm) |
| Drivers | Dual 5.25” mid-woofers, 1” soft dome tweeter |
| Frequency Response | 44Hz - 25kHz (±3dB, manufacturer specified) |
| Impedance | 4 ohms |
| Power Handling | 180W (IEC rated) |
| Sensitivity | 87dB |
| Spinorama Preference Score | 3.84 |
| Spinorama Preference Score with Perfect Sub | 5.69 |
| Weight | 34.2 lbs (15.5 kg) |
| Woofer Cabinet | ported, rear (dual) |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Dynaudio Emit 30 vs Klipsch RP-6000F II
- Dynaudio Emit 30 vs Klipsch RP-8000F II
- Dynaudio Emit 30 vs Klipsch RP-5000F II
- Dynaudio Emit 30 vs Definitive Technology BP-9020
- Dynaudio Emit 30 vs SVS Ultra Evolution Pinnacle
- Dynaudio Emit 30 vs KEF Q11 Meta
- Dynaudio Emit 30 vs Polk T50
- Dynaudio Emit 30 vs Klipsch Forte IV
- See all 46 comparisons