Different classes, so treat this as a step-up-or-not question rather than a head-to-head. The Dynaudio Emit 50 ranks #70 of 139 floorstanding speakers by sound quality at $1,274.25; the Dynaudio Emit 20 ranks #97 of 157 bookshelf speakers by sound quality at $1,049.
The case for the Dynaudio Emit 50: Full 3-way floorstander in the Emit lineup with dual 7-inch MSP (Magnesium Silicate Polymer) woofers, a dedicated 6-inch MSP midrange, and a 1.1-inch Cerotar soft dome tweeter with Hexis inner dome. Watch for: Rating estimated based on Emit series sibling testing.
The case for the Dynaudio Emit 20: Two-way design with a 28mm Esotar soft dome tweeter (Hexis-damped) and an 18cm mid-woofer, using a first-order crossover on the tweeter and second-order on the woofer. Watch for: A resonance around 600-800Hz gives snares and similar percussion a muffled, flat quality lacking impact: confirmed as originating in the woofer itself (isolated via measurements of the raw driver out of the cabinet), and attempts at constrained-layer damping didn’t resolve it.
Buy the Dynaudio Emit 50 ($1,274.25) for a floorstanding speaker; the Dynaudio Emit 20 ($1,049) suits a bookshelf speaker instead.
Still deciding? The full Passive Home rankings cover every ranked option.
Specifications Side By Side
| Dynaudio Emit 50 | Dynaudio Emit 20 | |
|---|---|---|
| Price | $1,274.25 per pair | $1,049.00 per pair |
| Ranked | #70 of 139 in Large Size Floorstanding Speakers | #97 of 157 in Large Size Bookshelf Speakers |
| Drivers | 1.1” (28mm) Cerotar soft dome tweeter with Hexis, 6” (150mm) MSP midrange, 2 x 7” (180mm) MSP woofers | 7.1” Magnesium Silicate Polymer woofer, 1.1” Cerotar soft dome with Hexis tweeter |
| Frequency Response | 33Hz - 25kHz (±3dB, manufacturer specified) | - |
| Sensitivity | 86dB (2.83V/1m, manufacturer specified) | 83.5dB (measured, Erin’s Audio Corner; 86dB manufacturer specified) |
| Impedance | 4 ohms nominal (manufacturer specified) | 6 ohms nominal (5.5 ohms minimum above 80Hz, measured, Erin’s Audio Corner) |
| Bass Extension (-3dB) | 33Hz (manufacturer specified) | 54Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-6dB) | 28Hz (manufacturer specified) | - |
| Dimensions | 44.9”H x 8.1”W x 12.3”D (1140 x 205 x 312 mm) | 14.6”H x 8.1”W x 12.3”D (370.0 x 205.0 x 312.0 mm) |
| Weight | 57.2 lbs (25.96 kg) each | 12.8 lbs (5.8 kg) |
| DIY Kit | No | No |
| Bass Extension (-10dB) | - | 33Hz (measured, Erin’s Audio Corner) |
| Woofer Cabinet | - | ported, rear |
| Spinorama Preference Score | - | 4.22 |
| Spinorama Preference Score with Perfect Sub | - | 5.92 |
Related Speaker Comparisons
More top alternatives to Dynaudio Emit 50:
- Dynaudio Emit 50 vs Dynaudio Emit 30
- Dynaudio Emit 30 vs Dynaudio Emit 20
- Dynaudio Emit 20 vs JBL XPL-90
- GR-Research X-LS Encore vs Dynaudio Emit 20
- SVS Ultra Bookshelf vs Dynaudio Emit 20
Prices on this page were last checked October 5, 2026 at 10:21 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Dynaudio Emit 50: $1,274.25 per pair Estimated Amazon eBay
Smaller models: the Dynaudio Emit 30 (ranked lower, rated 3.9/5), the Dynaudio Emit 20 (rated 3.6/5) and the Dynaudio Emit 10 (estimated 3.2/5).
Pros: Full 3-way floorstander in the Emit lineup with dual 7-inch MSP (Magnesium Silicate Polymer) woofers, a dedicated 6-inch MSP midrange, and a 1.1-inch Cerotar soft dome tweeter with Hexis inner dome. Produces deep low-frequency authority down to 33Hz (-3dB) and natural, fatigue-free vocal rendering.
Cons: Rating estimated based on Emit series sibling testing. 4-ohm nominal impedance and 86dB sensitivity require high-current amplification to handle heavy bass transients.
Full Dynaudio Emit 50 review and specifications →
| Bass Extension (-3dB) | 33Hz (manufacturer specified) |
|---|---|
| Bass Extension (-6dB) | 28Hz (manufacturer specified) |
| DIY Kit | No |
| Dimensions | 44.9”H x 8.1”W x 12.3”D (1140 x 205 x 312 mm) |
| Drivers | 1.1” (28mm) Cerotar soft dome tweeter with Hexis, 6” (150mm) MSP midrange, 2 x 7” (180mm) MSP woofers |
| Frequency Response | 33Hz - 25kHz (±3dB, manufacturer specified) |
| Impedance | 4 ohms nominal (manufacturer specified) |
| Sensitivity | 86dB (2.83V/1m, manufacturer specified) |
| Weight | 57.2 lbs (25.96 kg) each |
- Links
- Reviews, Comparisons and Sound Samples
- No independent measurement review is linked for this model; it is ranked from hands-on listening and comparison against similarly priced speakers.
- Head-to-Head Comparisons
Dynaudio Emit 20: $1,049.00 per pair Amazon eBay
Smaller model: the Dynaudio Emit 10 (estimated 3.2/5).
Larger models: the Dynaudio Emit 30 (rated 3.9/5) and the Dynaudio Emit 50 (estimated 4.2/5).
Pros: Two-way design with a 28mm Esotar soft dome tweeter (Hexis-damped) and an 18cm mid-woofer, using a first-order crossover on the tweeter and second-order on the woofer. Exceptional bass extension for a bookshelf speaker: reaches a clean, authoritative 40Hz in-room, rare enough that the reviewer says most listeners could skip a subwoofer for typical music. Very low distortion across the board, staying below 1% THD down to 40Hz at 86dB and below 3% even at 96dB: unusually clean bass performance where most two-way bookshelf speakers start rising in distortion around 80Hz. Wide, remarkably consistent horizontal directivity (about ±50-60°) that holds steady up to roughly 13kHz: rare for a speaker in this format, thanks to a beveled tweeter edge that acts as a mild waveguide. Excellent compression and dynamic-range linearity at the frequency extremes, actually showing slight bass enhancement rather than the sharp low-end compression common in similarly-sized bookshelf speakers. Measured bass extension of 54Hz (-3dB), with a measured sensitivity of 83.5dB.
Cons: A resonance around 600-800Hz gives snares and similar percussion a muffled, flat quality lacking impact: confirmed as originating in the woofer itself (isolated via measurements of the raw driver out of the cabinet), and attempts at constrained-layer damping didn’t resolve it. A peak around 4kHz adds a sharp, edgy quality to some male vocals. A roughly 5dB boost above 10kHz gives cymbals and hi-hats excess shimmer that can sound unnatural, especially pointed directly on-axis. Vertical dispersion shows two separate crossover-related notches (above and below the tweeter reference line around 5kHz) rather than the usual single one, a direct consequence of the shallow crossover slopes used on both drivers. Multitone distortion is elevated in the midrange, possibly due to the woofer’s magnet structure lacking a shorting ring. Best aimed slightly off-axis (about 10-15° of toe-out) to tame the excess high-frequency shimmer, rather than pointed straight at the listener.
Full Dynaudio Emit 20 review and specifications →
| Bass Extension (-10dB) | 33Hz (measured, Erin’s Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 54Hz (measured, Erin’s Audio Corner) |
| DIY Kit | No |
| Dimensions | 14.6”H x 8.1”W x 12.3”D (370.0 x 205.0 x 312.0 mm) |
| Drivers | 7.1” Magnesium Silicate Polymer woofer, 1.1” Cerotar soft dome with Hexis tweeter |
| Impedance | 6 ohms nominal (5.5 ohms minimum above 80Hz, measured, Erin’s Audio Corner) |
| Sensitivity | 83.5dB (measured, Erin’s Audio Corner; 86dB manufacturer specified) |
| Spinorama Preference Score | 4.22 |
| Spinorama Preference Score with Perfect Sub | 5.92 |
| Weight | 12.8 lbs (5.8 kg) |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Dynaudio Emit 20 vs Philharmonic BMR Monitor
- Dynaudio Emit 20 vs Klipsch RP-600M II
- Dynaudio Emit 20 vs JBL Studio 630
- Dynaudio Emit 20 vs Behringer B2030P
- Dynaudio Emit 20 vs Mission LX-3 MKII
- Dynaudio Emit 20 vs Polk Signature Elite ES20
- Dynaudio Emit 20 vs Ascend CBM-170 SE2
- Dynaudio Emit 20 vs Infinity Reference R162
- See all 70 comparisons