Short answer: a tie on sound quality. Both are rated 3.9/5 (#278 and #292 of 450 in-ear headphones), so choose on features and fit.

What the DUNU Titan S does well: Crinacle’s measurement gives it a preference score of 73, and across 34 hobbyist measurements on squig.link the bass, low mids and upper mids all land within half a decibel of the Harman target. The tradeoff: Hobbyist measurements put sub-bass about 3.2 dB below target, so the deepest synth and cinematic bass hits carry less rumble than the Harman curve calls for.
Buy the DUNU Titan S or the Kinera Loki Divine Mark on features: they are rated the same for sound quality at close to the same price.
Still deciding? The full Headphones rankings cover every ranked option.
Specifications Side By Side
| DUNU Titan S | Kinera Loki Divine Mark | |
|---|---|---|
| Price | - | $3,399.00 |
| Ranked | #278 of 450 in In-Ear Headphones | #292 of 450 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Back | Closed | Closed |
| Harman Preference Score | 73 (measured by crinacle, via AutoEQ) | 73 (median of 3 squig.link measurements, calibrated to AutoEQ) |
| Deviation From Target | 2.29 dB standard deviation | 1.87 dB standard deviation |
| Tonal Tilt | +0.29 (negative is warmer, positive brighter) | -0.33 (negative is warmer, positive brighter) |
| Connection | Wired | Wired |
| Driver Type | Dynamic | Hybrid (1 dynamic + 6 balanced armature + 4 electrostatic + 2 bone conduction) |
| Drivers | 1 x 11mm dynamic | 1 x dynamic + 6 x balanced armature + 4 x electrostatic + 2 x bone conduction |
| Impedance | 32 ohms | 14 ohms |
| Sensitivity | 110 dB | 105 dB |
| Frequency Response | 5Hz - 40kHz (Manufacturer specified) | 20Hz - 50kHz (Manufacturer specified) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-3.4 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (+2.4 dB at 30 Hz) |
Related Headphone Comparisons
More top alternatives to DUNU Titan S:
- 7Hz x Crinacle Zero 2 vs DUNU Titan S
- DUNU Titan S vs KZ ZSN Pro
- DUNU Titan S vs Tin HiFi T4
- Kinera Loki Divine Mark vs Noble Audio Sultan
- Kinera Loki Divine Mark vs Unique Melody MEST Fortune
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
DUNU Titan S AliExpress eBay
Pros: Crinacle’s measurement gives it a preference score of 73, and across 34 hobbyist measurements on squig.link the bass, low mids and upper mids all land within half a decibel of the Harman target. That keeps vocals, piano and guitars sounding natural rather than pushed forward or recessed. With a 32 ohm load and a 110 dB sensitivity rating, it plays at comfortable volume straight from a phone.
Cons: Hobbyist measurements put sub-bass about 3.2 dB below target, so the deepest synth and cinematic bass hits carry less rumble than the Harman curve calls for. A 4.9 dB dip near 6.1 kHz followed by a 4.1 dB peak near 11.9 kHz gives the treble an uneven texture, softening some detail while adding a touch of glare up top.
Full DUNU Titan S review and specifications →
| Released | Dec 2021 (4 years ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 2.29 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 11mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 5Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 73 (measured by crinacle, via AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 110 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-3.4 dB at 30 Hz) |
| Tonal Tilt | +0.29 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -5.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +10.1 dB | 0.70 |
| Peak | 5,993 Hz | +13.5 dB | 0.87 |
| Peak | 4,479 Hz | -9.3 dB | 0.51 |
| Peak | 40 Hz | -7.2 dB | 0.34 |
| Peak | 762 Hz | +2.2 dB | 1.04 |
| High shelf | 10,000 Hz | -5.4 dB | 0.70 |
| Peak | 9,592 Hz | +2.8 dB | 2.45 |
| Peak | 1,411 Hz | -0.8 dB | 2.84 |
| Peak | 2,335 Hz | +0.3 dB | 1.89 |
| Peak | 1,030 Hz | +0.5 dB | 3.30 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Kinera Loki Divine Mark: $3,399.00 Kinera eBay
Full Kinera Loki Divine Mark review and specifications →
| Released | May 2026 (5 months ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 1.87 dB standard deviation |
| Driver Type | Hybrid (1 dynamic + 6 balanced armature + 4 electrostatic + 2 bone conduction) |
| Drivers | 1 x dynamic + 6 x balanced armature + 4 x electrostatic + 2 x bone conduction |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 50kHz (Manufacturer specified) |
| Harman Preference Score | 73 (median of 3 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 14 ohms |
| Sensitivity | 105 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+2.4 dB at 30 Hz) |
| Tonal Tilt | -0.33 (negative is warmer, positive brighter) |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons

