Dita Project M vs Hidizs MS5

Last updated: October 17, 2026

Short answer: the Hidizs MS5. Both are rated 3.3/5 for sound quality (#909 and #912 of 1291 in-ear headphones), and the Hidizs MS5 costs $299 against $325 for the Dita Project M, so with nothing between them on sound quality, price settles it.

Dita Project M vs Hidizs MS5

The case for the Dita Project M: Bass sits close to target and holds down to 20 Hz, so low end sounds full without bloat. The catch: Presence sits about 7 dB low with a 9.2 dB dip near 3.9 kHz, so vocals and instruments lose some bite.

What the Hidizs MS5 does well: Lower mids sit within about 0.7 dB of target, keeping voices and guitars natural. The catch: Presence sits about 3.4 dB low with a 12.7 dB dip near 11.9 kHz, so vocals and instruments lose some bite.

Buy the Hidizs MS5. Both are rated the same for sound quality, and it costs $26 less than the Dita Project M.

Still deciding? The full Headphones rankings cover every ranked option.

Dita Project M

Bass sits close to target and holds down to 20 Hz, so low end sounds full without bloat.

Bloom Audio $325 eBay
$325
Hidizs MS5

Lower mids sit within about 0.7 dB of target, keeping voices and guitars natural.

Amazon $299.00 eBay
$299

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

Specifications Side By Side

Dita Project M Hidizs MS5
Price$325$299.00
Ranked#912 of 1291 in In-Ear Headphones#909 of 1291 in In-Ear Headphones
Form FactorIn-earIn-ear
BackClosedClosed
ConnectionWiredWired
Driver TypeHybridHybrid
Drivers1 x 9.8mm dynamic + 1 x balanced armature1 x 10mm dynamic + 4 x balanced armature
Impedance32 ohms5.3 ohms
Sensitivity107 dB/Vrms-
Harman Preference Score65 (median of 11 squig.link measurements, calibrated to AutoEQ)65 (median of 12 squig.link measurements, calibrated to AutoEQ)
Deviation From Target2.86 dB standard deviation2.71 dB standard deviation
Tonal Tilt-0.34 (negative is warmer, positive brighter)-0.37 (negative is warmer, positive brighter)
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-1.8 dB at 30 Hz)Within 6 dB of target down to 20 Hz (-2.3 dB at 30 Hz)
Frequency Response-20Hz - 40kHz
Weight-0 lbs (13.6 g)

Frequency Response Compared

Both headphones’ measurements overlaid on the Harman target. Above the target sounds louder in that range, below it quieter. Each curve is the median of several independent measurements, shifted so its 500 Hz to 2 kHz average sits at 0 dB, so only the tuning is compared.

Dita Project MHidizs MS5Harman target
Frequency response of the Dita Project M and Hidizs MS5-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: the Dita Project M from aftersound, bloomaudio, csi-zone, ducbloke, eliseaudio, fahryst, gadgetgenerations, iemocean, jaytiss, kazi, lumerion, obodio, sl0the, soundignity, theaudiostore, therollo9, tonedeafmonk and treblewellxtended; the Hidizs MS5 from aden, bryaudioreviews, dchpgall, digaoreviews, fahryst, hbb, kazi, practiphile, pw, silicagel, timmyv and tonedeafmonk, all via squig.link.

How Hidizs MS5 compares with other leading options: