Short answer: the Dita Prelude. Both are rated 4.5/5 for sound quality (#87 and #79 of 450 in-ear headphones), and the Dita Prelude costs $159 against $172.25 for the BQEYZ Cloud, so with nothing between them on sound quality, price settles it.
Why pick the BQEYZ Cloud: The median of seven hobbyist measurements on squig.link gives the Cloud a preference score of 79.6 with only 1.46 dB of deviation, so it tracks the Harman target closely from deep bass through the upper mids. The tradeoff: Air above 10 kHz runs about 4.3 dB hot, with a 5.4 dB peak near 8.1 kHz, so cymbals and sibilant vocals can sound edgy on bright recordings.
The case for the Dita Prelude: Four squig.link measurements give the Prelude a preference score of 79.2, with its single 10mm dynamic driver keeping bass within a dB of target down to 30 Hz. The tradeoff: The treble is uneven, with a 5.5 dB dip near 9.9 kHz followed by a 7 dB peak near 11.9 kHz, which can make cymbals sound dull one moment and splashy the next.
Buy the Dita Prelude. Both are rated the same for sound quality, and it costs $13.25 less than the BQEYZ Cloud.
Want more options? Browse the full Headphones rankings.
Specifications Side By Side
| BQEYZ Cloud | Dita Prelude | |
|---|---|---|
| Price | $172.25 | $159.00 |
| Ranked | #79 of 450 in In-Ear Headphones | #87 of 450 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Back | Closed | Closed |
| Harman Preference Score | 80 (median of 7 squig.link measurements, calibrated to AutoEQ) | 79 (median of 4 squig.link measurements, calibrated to AutoEQ) |
| Deviation From Target | 1.46 dB standard deviation | 1.50 dB standard deviation |
| Tonal Tilt | +0.30 (negative is warmer, positive brighter) | -0.17 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-1.8 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (+0.2 dB at 30 Hz) |
| Connection | Wired | Wired |
| Driver Type | Dynamic | Dynamic |
| Drivers | 1 x 10mm dynamic + 1 x 6.8mm passive radiator | 1 x 10mm dynamic |
| Impedance | 32 ohms | 32 ohms |
| Sensitivity | 110 dB | 108 dB/mW |
| Frequency Response | 7Hz - 40kHz (Manufacturer specified) | 20Hz - 20kHz (Manufacturer specified) |
| Built-in Microphone | No | No |
Related Headphone Comparisons
More top alternatives to BQEYZ Cloud:
- SeeAudio Yume vs BQEYZ Cloud
- BQEYZ Cloud vs Meze Alba
- Dita Prelude vs Meze Alba
- Dita Prelude vs Kiwi Ears Ember
- Kiwi Ears Ember vs Meze Alba
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
BQEYZ Cloud: $172.25 Amazon eBay
Pros: The median of seven hobbyist measurements on squig.link gives the Cloud a preference score of 79.6 with only 1.46 dB of deviation, so it tracks the Harman target closely from deep bass through the upper mids. Bass sits within 2 dB of target all the way down to 30 Hz, giving kick drums real weight without bloat, thanks partly to the passive radiator paired with its 10mm dynamic driver. At 32 ohms and 110 dB sensitivity it plays loudly straight from a phone or dongle.
Cons: Air above 10 kHz runs about 4.3 dB hot, with a 5.4 dB peak near 8.1 kHz, so cymbals and sibilant vocals can sound edgy on bright recordings. A 3.1 dB dip around 3.75 kHz also pulls vocal presence back slightly, and it costs more than the equally rated Final Audio A4000.
Full BQEYZ Cloud review and specifications →
| Released | 2024 (2 years ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 1.46 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic + 1 x 6.8mm passive radiator |
| Form Factor | In-ear |
| Frequency Response | 7Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 80 (median of 7 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 110 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-1.8 dB at 30 Hz) |
| Tonal Tilt | +0.30 (negative is warmer, positive brighter) |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Dita Prelude: $159.00 Bloom Audio eBay
Pros: Four squig.link measurements give the Prelude a preference score of 79.2, with its single 10mm dynamic driver keeping bass within a dB of target down to 30 Hz. Low mids sit right on target and upper mids 1 dB above, so voices and acoustic instruments sound clean and forward. It runs easily from a phone at 32 ohms and 108 dB/mW.
Cons: The treble is uneven, with a 5.5 dB dip near 9.9 kHz followed by a 7 dB peak near 11.9 kHz, which can make cymbals sound dull one moment and splashy the next. Presence around 3 to 6 kHz also sits 1.7 dB below target, so some instruments lack a little bite.
Full Dita Prelude review and specifications →
| Released | Jul 2025 (1 year ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 1.50 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 79 (median of 4 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 108 dB/mW |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+0.2 dB at 30 Hz) |
| Tonal Tilt | -0.17 (negative is warmer, positive brighter) |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons