Short answer: the SeeAudio Yume. It ranks #29 of 450 in-ear headphones by sound quality, rated 4.7/5, at $169; the BQEYZ Cloud ranks #79, rated 4.5/5, and costs $172.25, so there is not much of a tradeoff to weigh.
What the SeeAudio Yume does well: A preference score of 82 in HypetheSonics’ measurement with a smooth 1.49 dB standard deviation from target. The tradeoff: Presence sits about 3.2 dB below target from 3 to 6 kHz with a 4.3 dB dip near 4.3 kHz, so vocals and guitars lose a little bite, while a 4.7 dB peak near 8.5 kHz can make some cymbals stand out.
Why pick the BQEYZ Cloud: The median of seven hobbyist measurements on squig.link gives the Cloud a preference score of 79.6 with only 1.46 dB of deviation, so it tracks the Harman target closely from deep bass through the upper mids. The catch: Air above 10 kHz runs about 4.3 dB hot, with a 5.4 dB peak near 8.1 kHz, so cymbals and sibilant vocals can sound edgy on bright recordings.
Buy the SeeAudio Yume. It is rated higher for sound quality than the BQEYZ Cloud and costs less, which makes it the one to get unless you need something the other one does better.
Still deciding? The full Headphones rankings cover every ranked option.
Specifications Side By Side
| SeeAudio Yume | BQEYZ Cloud | |
|---|---|---|
| Price | $169.00 | $172.25 |
| Ranked | #29 of 450 in In-Ear Headphones | #79 of 450 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Back | Closed | Closed |
| Harman Preference Score | 82 (measured by HypetheSonics, via AutoEQ) | 80 (median of 7 squig.link measurements, calibrated to AutoEQ) |
| Deviation From Target | 1.49 dB standard deviation | 1.46 dB standard deviation |
| Tonal Tilt | -0.09 (negative is warmer, positive brighter) | +0.30 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-0.7 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (-1.8 dB at 30 Hz) |
| Connection | Wired | Wired |
| Driver Type | Hybrid (1 dynamic + 2 balanced armature) | Dynamic |
| Drivers | 1 x dynamic + 2 x balanced armature | 1 x 10mm dynamic + 1 x 6.8mm passive radiator |
| Impedance | 32 ohms | 32 ohms |
| Sensitivity | 106 dB | 110 dB |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) | 7Hz - 40kHz (Manufacturer specified) |
| Built-in Microphone | No | No |
Related Headphone Comparisons
How SeeAudio Yume compares with other leading options:
- Truthear Nova vs SeeAudio Yume
- Simgot SuperMix 4 vs SeeAudio Yume
- Tin HiFi T7 vs SeeAudio Yume
- SeeAudio Yume vs Truthear Hexa
- SeeAudio Yume vs Simgot EW200
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
SeeAudio Yume: $169.00 Linsoul eBay
Pros: A preference score of 82 in HypetheSonics’ measurement with a smooth 1.49 dB standard deviation from target. Bass reaches 20 Hz within about 1 dB of target and the mids from 200 Hz to 3 kHz stay within 0.2 dB, so the sound is balanced and natural. Its hybrid of one dynamic driver and two balanced armatures rates above the Final Audio A4000 and Shuoer S12.
Cons: Presence sits about 3.2 dB below target from 3 to 6 kHz with a 4.3 dB dip near 4.3 kHz, so vocals and guitars lose a little bite, while a 4.7 dB peak near 8.5 kHz can make some cymbals stand out. The higher rated Truthear Nova sells at about the same price.
Full SeeAudio Yume review and specifications →
| Released | Jan 2021 (5 years ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 1.49 dB standard deviation |
| Driver Type | Hybrid (1 dynamic + 2 balanced armature) |
| Drivers | 1 x dynamic + 2 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 82 (measured by HypetheSonics, via AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 106 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-0.7 dB at 30 Hz) |
| Tonal Tilt | -0.09 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -2.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -4.4 dB | 0.70 |
| Peak | 4,665 Hz | +2.4 dB | 1.70 |
| Peak | 63 Hz | +6.3 dB | 0.55 |
| Peak | 1,533 Hz | -1.1 dB | 1.58 |
| Peak | 181 Hz | -2.4 dB | 0.84 |
| High shelf | 10,000 Hz | +0.8 dB | 0.70 |
| Peak | 718 Hz | +0.7 dB | 2.29 |
| Peak | 6,483 Hz | +1.4 dB | 5.99 |
| Peak | 9,515 Hz | -1.5 dB | 1.89 |
| Peak | 359 Hz | -0.3 dB | 1.76 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
BQEYZ Cloud: $172.25 Amazon eBay
Pros: The median of seven hobbyist measurements on squig.link gives the Cloud a preference score of 79.6 with only 1.46 dB of deviation, so it tracks the Harman target closely from deep bass through the upper mids. Bass sits within 2 dB of target all the way down to 30 Hz, giving kick drums real weight without bloat, thanks partly to the passive radiator paired with its 10mm dynamic driver. At 32 ohms and 110 dB sensitivity it plays loudly straight from a phone or dongle.
Cons: Air above 10 kHz runs about 4.3 dB hot, with a 5.4 dB peak near 8.1 kHz, so cymbals and sibilant vocals can sound edgy on bright recordings. A 3.1 dB dip around 3.75 kHz also pulls vocal presence back slightly, and it costs more than the equally rated Final Audio A4000.
Full BQEYZ Cloud review and specifications →
| Released | 2024 (2 years ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 1.46 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic + 1 x 6.8mm passive radiator |
| Form Factor | In-ear |
| Frequency Response | 7Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 80 (median of 7 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 110 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-1.8 dB at 30 Hz) |
| Tonal Tilt | +0.30 (negative is warmer, positive brighter) |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons