Short answer: the Tin HiFi T7. It ranks #20 of 450 in-ear headphones by sound quality, rated 4.8/5, at $189. The SeeAudio Yume ranks #29, rated 4.7/5, at $169, $20 cheaper, which does not close the gap in sound quality.
The case for the Tin HiFi T7: Across ten hobbyist measurements on squig.link, the T7 earns a preference score of 83.5 with a low 1.11 dB deviation from target. The tradeoff: Air above 10 kHz runs about 3.2 dB high and a 5.4 dB peak near 8.1 kHz can add glare to sibilance and cymbals.
Why pick the SeeAudio Yume: A preference score of 82 in HypetheSonics’ measurement with a smooth 1.49 dB standard deviation from target. Watch for: Presence sits about 3.2 dB below target from 3 to 6 kHz with a 4.3 dB dip near 4.3 kHz, so vocals and guitars lose a little bite, while a 4.7 dB peak near 8.5 kHz can make some cymbals stand out.
Buy the Tin HiFi T7. It is rated higher for sound quality, and the $20 you would save on the SeeAudio Yume does not close the gap.
Want more options? Browse the full Headphones rankings.
Specifications Side By Side
| Tin HiFi T7 | SeeAudio Yume | |
|---|---|---|
| Price | $189.00 | $169.00 |
| Ranked | #20 of 450 in In-Ear Headphones | #29 of 450 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Back | Closed | Closed |
| Harman Preference Score | 84 (median of 10 squig.link measurements, calibrated to AutoEQ) | 82 (measured by HypetheSonics, via AutoEQ) |
| Deviation From Target | 1.11 dB standard deviation | 1.49 dB standard deviation |
| Tonal Tilt | -0.16 (negative is warmer, positive brighter) | -0.09 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+1.5 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (-0.7 dB at 30 Hz) |
| Connection | Wired | Wired |
| Driver Type | Dynamic | Hybrid (1 dynamic + 2 balanced armature) |
| Drivers | 1 x 10mm dynamic | 1 x dynamic + 2 x balanced armature |
| Impedance | 22 ohms | 32 ohms |
| Sensitivity | 112 dB (at 0.126 V) | 106 dB |
| Weight | 0 lbs (7.7 g) per earbud | - |
| Frequency Response | 10Hz - 20kHz (Manufacturer specified) | 20Hz - 20kHz (Manufacturer specified) |
| Built-in Microphone | No | No |
Related Headphone Comparisons
More top alternatives to Tin HiFi T7:
- Truthear Nova vs Tin HiFi T7
- Simgot SuperMix 4 vs Tin HiFi T7
- SeeAudio Yume vs BQEYZ Cloud
- Truthear Nova vs SeeAudio Yume
- Simgot SuperMix 4 vs SeeAudio Yume
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
Tin HiFi T7: $189.00 Amazon eBay
Pros: Across ten hobbyist measurements on squig.link, the T7 earns a preference score of 83.5 with a low 1.11 dB deviation from target. Sub-bass sits about 1.2 dB above target and holds strong at 30 Hz, so electronic music and film scores get satisfying rumble, while the mids stay within half a decibel of target. The 22 ohm impedance and 7.7 gram earpieces make it easy to drive and very light.
Cons: Air above 10 kHz runs about 3.2 dB high and a 5.4 dB peak near 8.1 kHz can add glare to sibilance and cymbals. A 4.3 dB dip near 10.3 kHz follows, leaving the upper treble slightly uneven. It shares its rating with the cheaper Juzear 81T and Simgot SuperMix 4.
Full Tin HiFi T7 review and specifications →
| Released | 2025 (1 year ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 1.11 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 10Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 84 (median of 10 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 22 ohms |
| Sensitivity | 112 dB (at 0.126 V) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+1.5 dB at 30 Hz) |
| Tonal Tilt | -0.16 (negative is warmer, positive brighter) |
| Weight | 0 lbs (7.7 g) per earbud |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
SeeAudio Yume: $169.00 Linsoul eBay
Pros: A preference score of 82 in HypetheSonics’ measurement with a smooth 1.49 dB standard deviation from target. Bass reaches 20 Hz within about 1 dB of target and the mids from 200 Hz to 3 kHz stay within 0.2 dB, so the sound is balanced and natural. Its hybrid of one dynamic driver and two balanced armatures rates above the Final Audio A4000 and Shuoer S12.
Cons: Presence sits about 3.2 dB below target from 3 to 6 kHz with a 4.3 dB dip near 4.3 kHz, so vocals and guitars lose a little bite, while a 4.7 dB peak near 8.5 kHz can make some cymbals stand out. The higher rated Truthear Nova sells at about the same price.
Full SeeAudio Yume review and specifications →
| Released | Jan 2021 (5 years ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 1.49 dB standard deviation |
| Driver Type | Hybrid (1 dynamic + 2 balanced armature) |
| Drivers | 1 x dynamic + 2 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 82 (measured by HypetheSonics, via AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 106 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-0.7 dB at 30 Hz) |
| Tonal Tilt | -0.09 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -2.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -4.4 dB | 0.70 |
| Peak | 4,665 Hz | +2.4 dB | 1.70 |
| Peak | 63 Hz | +6.3 dB | 0.55 |
| Peak | 1,533 Hz | -1.1 dB | 1.58 |
| Peak | 181 Hz | -2.4 dB | 0.84 |
| High shelf | 10,000 Hz | +0.8 dB | 0.70 |
| Peak | 718 Hz | +0.7 dB | 2.29 |
| Peak | 6,483 Hz | +1.4 dB | 5.99 |
| Peak | 9,515 Hz | -1.5 dB | 1.89 |
| Peak | 359 Hz | -0.3 dB | 1.76 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons