Short answer: the Beyerdynamic TYGR 300 R. It ranks #35 of 216 over-ear headphones by sound quality, rated 4.2/5, at $159.99; the Audio-Technica ATH-R50x ranks #52, rated 4.1/5, and costs $169, so there is little reason to consider the other one.
What the Beyerdynamic TYGR 300 R does well: A preference score of 86 in crinacle’s measurement shows it tracks the Harman target closely, with a smoothness of 1.9 dB. Watch for: Only the overall score is available, so there is no band by band breakdown of where it deviates from target.
Why pick the Audio-Technica ATH-R50x: A preference score of 83 and the smoothest deviation in this group at 1.67 dB make for a very even response, with bass from 60 to 200 Hz and low mids within 0.6 dB of target. The catch: Sub-bass is about 6 dB low under 60 Hz, so deep rumble is lacking.
Buy the Beyerdynamic TYGR 300 R. It is rated higher for sound quality than the Audio-Technica ATH-R50x and costs less, so it is the default pick unless a specific strength of the other one matters more to you.
Want more options? Browse the full Headphones rankings.
Specifications Side By Side
| Beyerdynamic TYGR 300 R | Audio-Technica ATH-R50x | |
|---|---|---|
| Price | $159.99 | $169.00 |
| Ranked | #35 of 216 in Over-Ear Headphones | #52 of 216 in Over-Ear Headphones |
| Form Factor | Over-ear | Over-ear |
| Harman Preference Score | 86 (measured by crinacle, via AutoEQ) | 83 (measured by oratory1990, via AutoEQ) |
| Deviation From Target | 1.90 dB standard deviation | 1.67 dB standard deviation |
| Tonal Tilt | -0.30 (negative is warmer, positive brighter) | +0.64 (negative is warmer, positive brighter) |
| Connection | Wired | Wired |
| Back | Open | Open |
| Impedance | 32 ohms | 50 ohms |
| Sensitivity | 96 dB SPL | 93.3 dB/mW |
| Weight | 0.6 lbs (290 g) | 0.5 lbs (207 g) |
| Frequency Response | 5Hz - 35kHz (Manufacturer specified) | 5Hz - 40kHz (Manufacturer specified) |
| Built-in Microphone | No | - |
| Sub-bass Extension | - | Falls 6 dB below target at 30 Hz (-6.4 dB at 30 Hz) |
| Driver Type | - | Dynamic |
| Drivers | - | 1 x 45mm dynamic |
Related Headphone Comparisons
More top alternatives to Beyerdynamic TYGR 300 R:
- Beyerdynamic DT 880 vs Beyerdynamic TYGR 300 R
- Beyerdynamic TYGR 300 R vs FiiO JT7
- Beyerdynamic TYGR 300 R vs AKG K371
- Beyerdynamic DT 880 vs Audio-Technica ATH-R50x
- Audio-Technica ATH-R50x vs Beyerdynamic DT 770 Pro
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
Beyerdynamic TYGR 300 R: $159.99 Amazon eBay
Pros: A preference score of 86 in crinacle’s measurement shows it tracks the Harman target closely, with a smoothness of 1.9 dB. The 32 ohm impedance and 96 dB sensitivity mean it runs fine from a phone or laptop, and 290 g is manageable for an open-back design. It shares its rating with the FiiO FT1 Pro at a lower price.
Cons: Only the overall score is available, so there is no band by band breakdown of where it deviates from target. The open back leaks sound and offers no isolation, and there is no built-in microphone, so it suits quiet listening and desk use rather than commuting or calls.
Full Beyerdynamic TYGR 300 R review and specifications →
| Released | 2019 (7 years ago) |
|---|---|
| Back | Open |
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 1.90 dB standard deviation |
| Form Factor | Over-ear |
| Frequency Response | 5Hz - 35kHz (Manufacturer specified) |
| Harman Preference Score | 86 (measured by crinacle, via AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 96 dB SPL |
| Tonal Tilt | -0.30 (negative is warmer, positive brighter) |
| Weight | 0.6 lbs (290 g) |
EQ preset to match the Harman target
Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +16.5 dB | 0.70 |
| Peak | 43 Hz | -14.1 dB | 0.32 |
| Peak | 2,772 Hz | +2.4 dB | 1.07 |
| Peak | 626 Hz | +2.7 dB | 1.03 |
| Peak | 5,621 Hz | -6.0 dB | 5.22 |
| High shelf | 10,000 Hz | -6.3 dB | 0.70 |
| Peak | 4,679 Hz | +1.3 dB | 6.00 |
| Peak | 23 Hz | -0.5 dB | 4.16 |
| Peak | 30 Hz | +0.3 dB | 2.29 |
| Peak | 6,882 Hz | +1.3 dB | 5.99 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Audio-Technica ATH-R50x: $169.00 Amazon eBay
Pros: A preference score of 83 and the smoothest deviation in this group at 1.67 dB make for a very even response, with bass from 60 to 200 Hz and low mids within 0.6 dB of target. At 50 ohms and 93.3 dB/mW sensitivity it can be driven by most portable sources, and at 207 g it is light. It costs less than the AKG K701 and AKG K702 while holding the same rating.
Cons: Sub-bass is about 6 dB low under 60 Hz, so deep rumble is lacking. Treble is slightly forward, with presence about 2 dB high, 6 to 10 kHz about 2.6 dB high and a 4.8 dB peak near 6.3 kHz, which can make vocals and cymbals bright. Its tilt of 0.64 leans bright, and the open back leaks sound.
Full Audio-Technica ATH-R50x review and specifications →
| Released | Jan 2025 (1 year ago) |
|---|---|
| Back | Open |
| Connection | Wired |
| Deviation From Target | 1.67 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 45mm dynamic |
| Form Factor | Over-ear |
| Frequency Response | 5Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 83 (measured by oratory1990, via AutoEQ) |
| Impedance | 50 ohms |
| Sensitivity | 93.3 dB/mW |
| Sub-bass Extension | Falls 6 dB below target at 30 Hz (-6.4 dB at 30 Hz) |
| Tonal Tilt | +0.64 (negative is warmer, positive brighter) |
| Weight | 0.5 lbs (207 g) |
EQ preset to match the Harman target
Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +7.2 dB | 0.70 |
| Peak | 482 Hz | +2.4 dB | 0.92 |
| Peak | 60 Hz | -4.8 dB | 0.60 |
| Peak | 6,204 Hz | -3.3 dB | 1.70 |
| Peak | 38 Hz | +2.3 dB | 1.60 |
| High shelf | 10,000 Hz | -2.1 dB | 0.70 |
| Peak | 1,497 Hz | -1.4 dB | 3.40 |
| Peak | 851 Hz | +0.5 dB | 2.04 |
| Peak | 4,628 Hz | +1.6 dB | 4.12 |
| Peak | 3,874 Hz | -2.5 dB | 6.00 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons